Metra 99-5832G Bruksanvisning
Läs nedan 📖 manual på svenska för Metra 99-5832G (4 sidor) i kategorin Bilsats. Denna guide var användbar för 12 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/4
REV. 4/20/2016 INST99-5832G
INSTALLATION INSTRUCTIONS FOR PART 99-5832G
METRA. The World’s best kits.™metraonline.com © COPYRIGHT 2016 METRA ELECTRONICS CORPORATION
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Radio trim panel is painted gray
• A) Radio trim panel • B) Dash panel • C) Radio brackets • D) Pocket • E) Airbag light blank
• F) (4) #8 x 3/8” Phillips truss head screws • G) (2) #8 x 3/8” Phillips pan head screws • H) (3) Metal “U” panel clips
• I) (5) Metal “D” panel clips • J) (4) Small metal “D” panel clips • K) (4) Plastic panel clips
KIT FEATURES
KIT COMPONENTS
• Panel removal tool • Phillips screwdriver
• Socket wrench • T-20 Torx screwdriver
TOOLS REQUIRED
(without 4.2” screen)
A
Table of Contents
B DC
F G H I J K
E
Dash Disassembly ..................................................2
Kit Preparation ........................................................2
Kit Assembly
– 3 ISO DIN radio provision with pocket .......................
– 3 ISO DDIN radio provision .......................................
Final Assembly .......................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wire harness: • 70-5524 Antenna adapter: • 40-EU10
99-5832G
1. Unclip the dash panel above the
radio. (Figure A)
2. Remove (2) T-20 Torx screws
securing the factory radio/trim
panel. (Figure B)
3. Unclip the factory radio/trim panel
from the dash, unplug and remove.
(Figure B)
4. Remove (1) T-20 Torx screw per
vent then unclip and remove the
vents from the factory radio/trim
panel. (Figure C)
5. Unclip and remove the hazard
switch assembly from the factory
radio/trim panel. (Figure D)
Continue to kit preparation
Dash Disassembly Kit Preparation
1. Secure the factory vents to the radio
trim panel using the (2) #8 x 3/8”
Phillips pan head screws provided.
(Figure A)
2. Snap the factory hazard button into the
radio trim panel. An airbag light blank
has been included for models without a
passenger airbag indicator. (Figure A)
(Figure B)
(Figure A) (Figure D) (Figure B) (Figure C)
(Figure C) (Figure A)
3. Attach the (4) plastic panel clips
provided, to the radio trim panel.
(Figure B)
4. Attach the (12) metal panel clips
provided, to the . (Figure C)dash panel
Continue to kit assembly
99-5832G
Kit Assembly Final Assembly
ISO DIN radio provision with pocket
1. Attach the pocket radio to the
brackets using the (4) supplied
#8 x 3/8” Phillips truss head screws.
(Figure A)
2. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3. Slide the radio into the completed
assembly and then secure it using
the screws supplied with the radio.
(Figure B)
Continue to final assembly
ISO DDIN radio provision
1. Attach the to the radio brackets
radio using screws supplied with
the radio. (Figure C)
Continue to final assembly
(Figure A)
(Figure C) (Figure A)
(Figure B)
1. Cut the shaded portion from the
sub-dash of the vehicle to allow
the radio to fit. (Figure A)
2. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for
proper operation.
3. Secure the radio into the dash.
4. Snap the over radio trim panel
the radio and then reassemble
the dash in reverse order of
disassembly.
Remove shaded area
Produktspecifikationer
| Varumärke: | Metra |
| Kategori: | Bilsats |
| Modell: | 99-5832G |
Behöver du hjälp?
Om du behöver hjälp med Metra 99-5832G ställ en fråga nedan och andra användare kommer att svara dig
Bilsats Metra Manualer
29 December 2024
29 December 2024
29 December 2024
29 December 2024
29 December 2024
29 December 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
Bilsats Manualer
- Bilsats Kenwood
- Bilsats Motorola
- Bilsats Nokia
- Bilsats Pioneer
- Bilsats Siemens
- Bilsats Alpine
- Bilsats Silvercrest
- Bilsats Nedis
- Bilsats Gembird
- Bilsats Lenco
- Bilsats Pyle
- Bilsats Livoo
- Bilsats Manta
- Bilsats BeeWi
- Bilsats Caliber
- Bilsats Sony Ericsson
- Bilsats Blaupunkt
- Bilsats Manhattan
- Bilsats Exibel
- Bilsats Trust
- Bilsats Thule
- Bilsats Hama
- Bilsats Kensington
- Bilsats Parrot
- Bilsats Brigmton
- Bilsats Maginon
- Bilsats Plantronics
- Bilsats Magellan
- Bilsats Clarion
- Bilsats HTC
- Bilsats Envivo
- Bilsats Belkin
- Bilsats Uniden
- Bilsats Renegade
- Bilsats Boss
- Bilsats Cobra
- Bilsats Jabra
- Bilsats TomTom
- Bilsats Technaxx
- Bilsats Bury
- Bilsats T'nB
- Bilsats SuperTooth
- Bilsats Veho
- Bilsats MT Logic
- Bilsats Mr Handsfree
- Bilsats HQ
- Bilsats Scosche
- Bilsats PAC
- Bilsats Urban Revolt
- Bilsats Iluv
- Bilsats KRAM
- Bilsats NAV-TV
- Bilsats Ergotron
- Bilsats Konig & Meyer
- Bilsats Havis
- Bilsats Alpin
- Bilsats Novero
- Bilsats WAGAN
- Bilsats Kogan
- Bilsats Novus
- Bilsats Foliatec
- Bilsats B-Speech
- Bilsats THB
- Bilsats Interphone-Cellularline
- Bilsats Perfect Choice
- Bilsats Arkon
- Bilsats SiriusXM
- Bilsats I-Tec
- Bilsats Hamron
- Bilsats Brodit
Nyaste Bilsats Manualer
31 December 2025
29 December 2024
16 December 2024
19 Oktober 2024
6 Oktober 2024
2 Oktober 2024
29 September 2024
25 September 2024
25 September 2024
23 September 2024