Metra 99-6516B Bruksanvisning
Läs nedan 📖 manual på svenska för Metra 99-6516B (8 sidor) i kategorin Bilsats. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/8
APPLICATIONS
METRA. The World’s best kits.™metraonline.com1-800-221-0932 © COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
REV. 3/4/2014 INST99-6516B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
INSTALLATION INSTRUCTIONS FOR PART 99-6516B
• A) Radio housing trim panel • B) Radio housing • C) ISO Brackets • D) ISO Trim plate • E) Double DIN brackets
• F) Double DIN trim plate • G) Pocket • H) (7) metal panel clips • I) (8) #6 Phillips screws
KIT COMPONENTS
• DIN radio provision with pocket
• ISO radio provision with pocket
• Double DIN radio provision
• Painted matte black
KIT FEATURES
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-6502-NAV - Chrysler CAN R.A.P. interface 2004-up
• CHTO-01 - Chrysler CAN amp interface 2004-up
Antenna Adapter: • 40-CR10 - Chrysler antenna adapter 2004-up
• Flat blade screwdriver • Panel removal tool
• Phillips screwdriver • Socket wrench • Cutting tool
TOOLS REQUIRED
A B C
G
D
H I
E F
Dash Disassembly
– Chrysler 300 2005-2007 ...................................... 2
Kit Assembly
– DIN radio provision with pocket ............................ 2
– ISO radio provision with pocket ............................ 3
– Double DIN radio provision ................................... 3
Table of Contents
99-6516B
1. Unclip and remove entire panel
surrounding radio and climate
controls, including A/C vents and
clock. (Figure A)
2. Remove (4) 7mm screws securing
radio to dash and remove radio.
(Figure B)
3. Remove factory vents, clock,
switch plate, and climate controls
from the factory radio panel and
transfer to the 99-6516B radio
panel using the screws provided in
this package.
Continue to kit assembly
Dash Disassembly Kit Assembly
(Figure A)
(Figure B)
DIN radio provision with pocket
1. Slide the DIN cage into the radio
housing and secure by bending
the metal locking tabs down.
(Figure A)
2. Slide the aftermarket radio into the
cage until secure. (Figure B)
3. Snap the pocket into the radio
housing. (Figure C)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
5. Reassemble dash in reverse order
of disassembly, using the new
Metra radio housing trim panel.
(Figure A)
(Figure C)
(Figure B)
99-6516B
Kit Assembly
ISO radio provision with pocket
1. Mount the ISO Brackets to the
radio with the screws supplied
with the unit. (Figure A)
2. Slide the radio into the radio
opening until the side clips engage.
(Figure B)
3. Snap the ISO Trim Plate into the
radio housing. (Figure C)
4. Snap the pocket into the radio
housing. (Figure C)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
6. Reassemble dash in reverse order
of disassembly, using the new
Metra radio housing trim panel.
(Figure A)
(Figure C)
(Figure B)
right side clip
Double DIN radio provision
1. Cut and remove center divider in
radio housing. (Figure A)
2. Snap the double DIN brackets
to the inside edge of the radio
housing. (Figure B)
3. Slide the double DIN radio unit
into the double DIN bracket/radio
housing assembly and secure
the radio unit to the kit using the
screws supplied with the radio
unit. (Figure C)
4. Snap the double DIN trim-plate
onto the housing/radio assembly.
(Figure D)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
6. Reassemble dash in reverse order
of disassembly, using the new
Metra radio housing trim panel.
(Figure A)
(Figure B)
(Figure C)
(Figure D)
Produktspecifikationer
| Varumärke: | Metra |
| Kategori: | Bilsats |
| Modell: | 99-6516B |
Behöver du hjälp?
Om du behöver hjälp med Metra 99-6516B ställ en fråga nedan och andra användare kommer att svara dig
Bilsats Metra Manualer
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
Bilsats Manualer
- Bilsats Motorola
- Bilsats Nokia
- Bilsats Pioneer
- Bilsats Siemens
- Bilsats Alpine
- Bilsats Silvercrest
- Bilsats Nedis
- Bilsats Gembird
- Bilsats Pyle
- Bilsats Livoo
- Bilsats BeeWi
- Bilsats Caliber
- Bilsats Manhattan
- Bilsats Thule
- Bilsats Hama
- Bilsats Parrot
- Bilsats Maginon
- Bilsats Envivo
- Bilsats Uniden
- Bilsats Technaxx
- Bilsats Bury
- Bilsats T'nB
- Bilsats SuperTooth
- Bilsats Veho
- Bilsats Mr Handsfree
- Bilsats HQ
- Bilsats Scosche
- Bilsats PAC
- Bilsats Urban Revolt
- Bilsats Iluv
- Bilsats KRAM
- Bilsats NAV-TV
- Bilsats Ergotron
- Bilsats Havis
- Bilsats Kogan
- Bilsats Interphone-Cellularline
- Bilsats Arkon
- Bilsats I-Tec
- Bilsats Hamron
- Bilsats Brodit
Nyaste Bilsats Manualer
19 Oktober 2024
6 Oktober 2024
2 Oktober 2024
29 September 2024
25 September 2024
25 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024