Metra 99-6531HG Bruksanvisning
Läs nedan 📖 manual på svenska för Metra 99-6531HG (8 sidor) i kategorin Bilsats. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/8
METRA. The World’s best kits.™metraonline.com © COPYRIGHT 2016 METRA ELECTRONICS CORPORATION
REV. 1/6/2016 INST99-6531HG
CAUTION: Metra recommends disconnecting the negative battery
terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your
local Dealership for more information. All accessories, switches,
climate controls panels, and especially air bag indicator lights
must be connected before reconnecting the battery or cycling
the ignition. Also, do not remove the factory radio with the key
in the on position, or the vehicle running. It would be best to
remove the key from the ignition and then wait a few seconds
before removing the factory radio.
Installation instructions for part 99-6531HG
• ISO DIN radio provision with pocket
• Painted high gloss black
• A) Radio trim panel • B) Radio brackets • C) Radio mounting brackets • D) Pocket • E) (4) Panel clips
• F) (2) #8 x 3/8” Phillips screws • G) (4) 12 mm x 5 mm Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-6523-NAV Antenna Adapter: • 40-EU55
• Panel removal tool • Phillips screwdriver
• 86-3528 radio removal tool • Cutting tool
• Torx T-25 driver
TOOLS REQUIRED
ADC E F
G
B
Dash Disassembly ................................................. 2
Kit Assembly
– ISO DIN radio provision with pocket 3 ......................
Table of Contents
99-6531HG
Dash Disassembly
1. Using Metra’s 86-3528 radio
removal tools, pull the factory radio
from the dash. (Figure A)
2. Remove (2) T-25 Torx screws from
the top of the factory radio trim
panel opening, and (2) T-25 Torx
screws from the bottom of the
opening. (Figure B)
3. Pull down slightly on the top center
of the panel, and then unclip and
remove the panel. (Figure C)
4. Remove (4) T-10 Torx screws
securing the factory radio clip
brackets to the panel. (Figure D)
5. In the sub-dash cavity of the
vehicle, grind or cut the (2) silver
rivets from the left and right side.
(Figure E)
6. Cut and remove the shaded portion
of the sub-dash cavity as shown.
(Figure F)
Note: Take caution not to cut
the vent ducts.
Continue to kit assembly.
(Figure A) (Figure D)
(Figure C) (Figure F)
(Figure B) (Figure E)
Remove
shaded
area
99-6531HG
Kit Assembly
(Figure C)
(Figure B) (Figure D)
(Figure A)
ISO DIN radio provision with pocket
1. Secure the to the pocket radio
brackets with (2) #8 x 3/8” screws
supplied. Note: The pins on the
brackets will align with the front
mounting hole of the pocket.
(Figure A)
2. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3. Slide the radio in the pocket/bracket
assembly, and then secure to the
assembly using screws provided
with the radio, or the (4) 12mm x
5mm Phillips screws included in
this kit. Note: The screws must
be flush in the radio brackets
to slide into the radio mounting
brackets. Most radios will mount
best with the radio brackets
slid to the front edge, and the
radio’s mounting position behind
the arrow on the radio bracket.
(Figure B)
4. Position the radio mounting
brackets into the factory radio trim
panel, and then secure with the (4)
T-25 Torx screws removed during
step four of dash disassembly.
(Figure C)
5. Reassemble the panel back into
the vehicle, in reverse order of
dash disassembly in step 2.
6. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
7. Slide the completed assembly into
the radio opening between the
radio mounting brackets until it
clips into the opening.
8. Attach the (4) to the panel clips
6531 radio trim panel. (Figure D)
9. Snap the into radio trim panel
the opening around the radio.
Produktspecifikationer
| Varumärke: | Metra |
| Kategori: | Bilsats |
| Modell: | 99-6531HG |
Behöver du hjälp?
Om du behöver hjälp med Metra 99-6531HG ställ en fråga nedan och andra användare kommer att svara dig
Bilsats Metra Manualer
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
Bilsats Manualer
- Bilsats Motorola
- Bilsats Nokia
- Bilsats Pioneer
- Bilsats Siemens
- Bilsats Alpine
- Bilsats Silvercrest
- Bilsats Nedis
- Bilsats Gembird
- Bilsats Pyle
- Bilsats Livoo
- Bilsats BeeWi
- Bilsats Caliber
- Bilsats Manhattan
- Bilsats Thule
- Bilsats Hama
- Bilsats Parrot
- Bilsats Maginon
- Bilsats Envivo
- Bilsats Uniden
- Bilsats Technaxx
- Bilsats Bury
- Bilsats T'nB
- Bilsats SuperTooth
- Bilsats Veho
- Bilsats Mr Handsfree
- Bilsats HQ
- Bilsats Scosche
- Bilsats PAC
- Bilsats Urban Revolt
- Bilsats Iluv
- Bilsats KRAM
- Bilsats NAV-TV
- Bilsats Ergotron
- Bilsats Havis
- Bilsats Kogan
- Bilsats Interphone-Cellularline
- Bilsats Arkon
- Bilsats I-Tec
- Bilsats Hamron
- Bilsats Brodit
Nyaste Bilsats Manualer
19 Oktober 2024
6 Oktober 2024
2 Oktober 2024
29 September 2024
25 September 2024
25 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024