Metra 99-7637 Bruksanvisning

Metra Bilsats 99-7637

Läs nedan 📖 manual på svenska för Metra 99-7637 (5 sidor) i kategorin Bilsats. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/5
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 6/3/19 INST99-7637
I N S TA L L AT I O N I N S T R U C T I O N S
99-7637
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT COMPONENTS
• A) Radio housing (front) • B) Radio housing (rear) • C) Radio trim panel • D) Radio brackets • E) #4 x 3/8” Phillips screws (4)
• F) #6 x 3/8” Phillips screws (4) • G) Panel clips (3)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-7552
Antenna Adapter: 40-NI12
A B C E F
D
Nissan Altima 2019-up
G
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
KIT FEATURES
ISO DIN radio provision with pocket
Painted with a gloss black face, silver trim, and a textured housing.
1.800.221.0932
|
MetraOnline.com
2
1. Unclip and remove the trim panel
behind the radio. There are (4) clips
securing this panel to the dash. Use
caution as the front of the trim panel
can easily be damaged. (Figure A)
2. Remove (4) 10mm screws securing the
radio. Take note that the lower radio
brackets are angled inward, hiding the
bottom (2) screws from being easily
seen. Slide the radio out, then unplug
and remove the radio. (Figure B)
Continue to Kit Assembly
(Figure A) (Figure B)
DASH DISASSEMBLY
REV. 6/3/2019 INST99-7637 3
KIT ASSEMBLY
1. Attach (3) provided onto the panel clips
radio housing (front). (Figure A)
2. Snap the radio housing (front) to the
radio housing (rear), then secure using
(4) #4 x 3/8” Phillips screws provided
(Figure B)
3. radio brackets Secure the to the radio
housing using (4) #6 x 3/8” Phillips
screws provided. (Figure C)
4. Clip the onto the radio radio trim panel
housing assembly. (Figure D)
5. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
6. Slide the radio into the radio housing
assembly through the back, then secure
it to the assembly using screws supplied
with the radio. (Figure E)
7. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
8. Secure the radio assembly to the dash
using the factory screws.
9. Snap the factory trim panel to the dash
to complete the installation.
(Figure A) (Figure D)
(Figure B) (Figure E)
(Figure C)

Produktspecifikationer

Varumärke: Metra
Kategori: Bilsats
Modell: 99-7637

Behöver du hjälp?

Om du behöver hjälp med Metra 99-7637 ställ en fråga nedan och andra användare kommer att svara dig




Bilsats Metra Manualer

Metra

Metra 99-7367HG Bruksanvisning

25 September 2024
Metra

Metra 99-8223 Bruksanvisning

25 September 2024
Metra

Metra 99-7422 Bruksanvisning

25 September 2024
Metra

Metra 99-7875 Bruksanvisning

25 September 2024
Metra

Metra 99-3302 Bruksanvisning

25 September 2024
Metra

Metra 99-5802 Bruksanvisning

25 September 2024
Metra

Metra 99-7874 Bruksanvisning

25 September 2024
Metra

Metra 99-5832G Bruksanvisning

25 September 2024
Metra

Metra 99-9011 Bruksanvisning

25 September 2024
Metra

Metra 99-6000 Bruksanvisning

25 September 2024

Bilsats Manualer

Nyaste Bilsats Manualer