Metra 99-8248B Bruksanvisning
Läs nedan 📖 manual på svenska för Metra 99-8248B (8 sidor) i kategorin Bilsats. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/8
METRA. The World’s best kits.™metraonline.com1-800-221-0932 © COPYRIGHT 2004-2014 METRA ELECTRONICS CORPORATION
REV. 12/9/2014 INST99-8248B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Installation instructions for part 99-8248B
• ISO DIN radio provision with pocket
• Painted black
• A) Radio housing trim panel • B) Brackets • C) Pocket • D) (4) #8 x 3/8” screws • E) (2) Panel clips
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1761 or TYTO-02
Antenna Adapter: • Not required
• Panel removal tool • Phillips screwdriver
TOOLS REQUIRED
A B C D
E
Dash Disassembly
– Toyota Highlander 2014-up .................................. 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
Table of Contents
99-8248B
1. Unsnap and remove climate
control and the long trim panel
with it. (Figure A)
2. Unsnap the thin trim panel from
the top and right side of the radio.
(Figure B)
3. Unsnap and remove the climate
vents from either side of the radio.
(Figure C)
4. Remove four 10 mm bolts to
remove the factory radio.
(Figure D)
Continue to Kit Assembly
Dash Disassembly
(Figure C)(Figure A)
(Figure D)(Figure B)
99-8248B
Kit Assembly
(Figure B)(Figure A)
ISO DIN radio provision with pocket
1. Attach the (2) panel clips to the
radio housing.
Note: The factory panel clips
may be used if preferred.
2. Mount the pocket to the bracket/
panel assembly with the
(4) #8 x 3/8” Phillips screws
supplied. (Figure A)
3. Slide the radio into the assembly
and secure with screws supplied
with the radio. (Figure B)
4. Locate the factory wiring
harness in the dash. Metra
recommends using the proper
mating adapter from Metra or
AXXESS. All accessories, switches,
and especially air bag indicator
lights must be plugged in before
reconnecting the battery or cycling
the ignition. Test everything for
proper operation.
5. Mount the radio/bracket assembly
into the dash opening.
6. Snap the radio trim panel over the
new radio and reassemble dash in
reverse order of disassembly.
Produktspecifikationer
| Varumärke: | Metra |
| Kategori: | Bilsats |
| Modell: | 99-8248B |
Behöver du hjälp?
Om du behöver hjälp med Metra 99-8248B ställ en fråga nedan och andra användare kommer att svara dig
Bilsats Metra Manualer
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
Bilsats Manualer
- Bilsats Motorola
- Bilsats Nokia
- Bilsats Pioneer
- Bilsats Siemens
- Bilsats Alpine
- Bilsats Silvercrest
- Bilsats Nedis
- Bilsats Gembird
- Bilsats Pyle
- Bilsats Livoo
- Bilsats BeeWi
- Bilsats Caliber
- Bilsats Manhattan
- Bilsats Thule
- Bilsats Hama
- Bilsats Parrot
- Bilsats Maginon
- Bilsats Envivo
- Bilsats Uniden
- Bilsats Technaxx
- Bilsats Bury
- Bilsats T'nB
- Bilsats SuperTooth
- Bilsats Veho
- Bilsats Mr Handsfree
- Bilsats HQ
- Bilsats Scosche
- Bilsats PAC
- Bilsats Urban Revolt
- Bilsats Iluv
- Bilsats KRAM
- Bilsats NAV-TV
- Bilsats Ergotron
- Bilsats Havis
- Bilsats Kogan
- Bilsats Interphone-Cellularline
- Bilsats Arkon
- Bilsats I-Tec
- Bilsats Hamron
- Bilsats Brodit
Nyaste Bilsats Manualer
19 Oktober 2024
6 Oktober 2024
2 Oktober 2024
29 September 2024
25 September 2024
25 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024