Metra 99-8266 Bruksanvisning

Metra Bilsats 99-8266

Läs nedan 📖 manual på svenska för Metra 99-8266 (4 sidor) i kategorin Bilsats. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

I N S TA L L AT I O N I N S T R U C T I O N S

99-8266BLHG

KIT FEATURES

• ISO DIN radio provision with pocket

• ISO DDIN radio provision

• Tinted metallic ﬁnish

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• 10mm Socket wrench

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Preparation .......................................................2

Kit Assembly

–ISO DIN radio provision with pocket ..................3

–ISO DDIN radio provision .....................................3

WIRING & ANTENNA CONNECTIONS

(sold separately)

Wiring Harness: TBA

Antenna Adapter: 40-LX11

A B C

Toyota Camry 2018-up*

*Visit for up-to-date vehicle speciﬁc applications.MetraOnline.com

1.800.221.0932

MetraOnline.com

DASH DISASSEMBLY KIT PREPARATION

Please visit Metraonline.com for

Dash Disassembly illustrations.

Please visit Metraonline.com for

Kit Preparation illustrations.

1. Unclip and remove the dashboard trim

panel below the climate controls.

2. For models with a push button start:

Unclip the Start/Stop button trim panel

and set it to the side.

For models without a push button start:

Unclip and remove the trim panel to the

left of the radio/climate control panel.

3. Unclip and remove the lower dashboard

trim panel directly above the glovebox.

4. Unclip and remove the upper dashboard

trim panel with a/c vent.

5. Unclip the climate control panel and set

it to the side.

6. Remove (4) 10mm screws securing the

radio panel, then unplug and remove

the panel.

Continue to Kit Preparation

1. Unclip and remove the passenger airbag

light assembly from the factory radio

panel, then attach the assembly to the

radio trim panel

2. Remove the panel clips from the factory

radio panel, then attach them onto the

radio trim panel

Continue to Kit Assembly

REV. 8/3/2018 INST99-8266BLHG 3

KIT ASSEMBLY

ISO DIN radio provision with pocket

1. Attach the

radio brackets

to the

pocket

using the (4) #8 x 3/8” Phillips screws

provided. (Figure A)

2. Remove the metal DIN sleeve and trim

ring from the aftermarket radio.

3. Slide the radio into the bracket/pocket

assembly, then secure it using the

screws supplied with the radio.

(Figure B)

4. Locate the factory wiring harness and

antenna connector in the dash and

complete all necessary connections to

the radio. Metra recommends using

the proper mating adapter from Metra

and/or Axxess. Test the radio for proper

operation.

5. Connect the passenger airbag assembly,

then secure the completed assembly to

the dash using the factory screws.

6. Reassemble the dash in reverse

order of disassembly to complete the

installation.

(Figure B)

(Figure A)

ISO DDIN radio provision

1. Attach the

radio brackets

to the radio

using the screws supplied with the

radio. (Figure A)

2. Locate the factory wiring harness and