Middle Atlantic Products SS Bruksanvisning

Läs nedan 📖 manual på svenska för Middle Atlantic Products SS (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
I-2000 Rev K
THANK YOU
Thank you for purchasing the SS/SSL Sliding Shelf. Please read these instructions
thoroughly before installing this product.
PRODUCT FEATURES
- Shelf slides out for easy access to the rear of equipment or to create a writing surface
- Telescopic rear support allows both shelves to be mounted to any rack
- Large shelf area can accommodate a wide variety of equipment
Page 2
7/8” HOOK AND LOOP FASTENERS
- To extend the shelf, grab the front edge of the shelf and
gently pull forward until the rollers seat in locking
dimples.
- To extend the shelf, pull forward by grasping the flange
on the front of the shelf. The shelf will lock when
fully extended.
SLIDING SHELF (SS SHOWN)
8-32 x 1/2 PANHEAD SCREW
7/8"
SSL
SS
#10X5/8
WOOD SCREW
8-32
STAR NUT
QTY PART
QTY PART
SSL
SS
CAUTION: DO NOT PULL OUT THE SHELF TO FAR,
IT MAY BECOME DETACHED.
QTY
PSSRB1
PART
1 A
QTY PART
2 B
QTY PART
2 C
QTY PART
2 D
2 E
2 F
PARTS LIST
OPERATION
Page 3
- Place soft material dot on the component’s foot. If there is no feet on the component, place as close to
the corner as possible to ensure stability. (FIGURE D)
- Extend the rear hanging brackets until they meet
the sides of the rack. (FIGURE A)
- Attach PSSRB1s to the shelf’s preinstalled
rear support bracket with provided hardware.
(FIGURE B)
- Ensure all brackets are aligned, tighten screws,
nuts and preinstalled wing-nuts. (FIGURE B)
NOTE: Leave no gap during installation of
part B. (FIGURE C)
- Level the shelf from front to back Secure the
brackets to the sides with supplied wood screws.
Tighten the wing-nuts on the bracket. (FIGURE A)
- Mate coarse material dot on the soft material dot. (FIGURE E)
FIGURE A (Rear of Shelf)
FIGURE B (Rear of Shelf)
INCORRECT
(Weaker) CORRECT
(Stronger)
WOOD RACK INSTALLATION (Without Rear Rail)
INSTALLATION WITH REAR RAIL
FIGURE E
FIGURE D
HOOK AND LOOP FASTENER INSTALLATION
INSTALLATION
Rear
Support
Bracket
Rear
Support
Bracket
E
F
C
B
DD
FIGURE C
Note
Gap

Produktspecifikationer

Varumärke: Middle Atlantic Products
Kategori: Inte kategoriserad
Modell: SS

Behöver du hjälp?

Om du behöver hjälp med Middle Atlantic Products SS ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Middle Atlantic Products Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer