Mikrotik SXTsq 5 ac Bruksanvisning

Mikrotik Inte kategoriserad SXTsq 5 ac

Läs nedan 📖 manual på svenska för Mikrotik SXTsq 5 ac (7 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/7
SXTsq-series
SXTsq-series
SXTsq-series
SXTsq-seriesSXTsq-series
SXTsq series
SXTsq series
SXTsq series
SXTsq seriesSXTsq series
The SXTsq is an outdoor wireless router with a built-in directional antenna. It can be used as a CPE or for point to point links (use RouterOS wireless
mode "bridge" to work as a single-client AP for point to point scenarios). List of products in series:
SXTsq Lite2
SXTsq Lite2
SXTsq Lite2
SXTsq Lite2SXTsq Lite2
SXTsq Lite5
SXTsq Lite5
SXTsq Lite5
SXTsq Lite5SXTsq Lite5
SXTsq 5 ac
SXTsq 5 ac
SXTsq 5 ac
SXTsq 5 acSXTsq 5 ac
SXTsq 5 High Power
SXTsq 5 High Power
SXTsq 5 High Power
SXTsq 5 High PowerSXTsq 5 High Power
Safety Warnings
Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
All installation methods for mounting an access point on any wall surface is subject to the acceptance of local jurisdiction.
The Installation of the equipment must comply with local and national electrical codes.
This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the
correct hardware and configuration or to follow the correct procedures could result in a hazardous situation for people and damage to the system.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your
own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.
Exposure to Radio Frequency Radiation:
Exposure to Radio Frequency Radiation:
Exposure to Radio Frequency Radiation:
Exposure to Radio Frequency Radiation:Exposure to Radio Frequency Radiation:This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an
uncontrolled environment.This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the
general public.
Quickstart
Open the Ethernet door.
Connect an Ethernet cable to the Ethernet port. The maximum diameter of Ethernet cable is 6mm.
Connect the other end of the Ethernet cable to the included PoE injector.
Plug the PoE injector into your network switch or computer.
Plug the included power supply into the PoE injector to start up the device.
Set LAN computer IP configuration to (DHCP).
automatic
The default IP address of the unit is , open this address in your web browser to start the configuration. The username is admin and
192.168.88.1
there is no password . (or, for some models, check user and wireless passwords on the sticker)
We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best
performance and stability.
Choose your country, to apply country regulation settings and set up your password on the screen that loads.
MikroTik mobile app
1.
2.
3.
4.
5.
6.
Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point.
Scan QR code and choose your preferred OS.
Install and open application.
By default, the IP address and user name will be already entered.
Click Connect to establish a connection to your device through a wireless network.
Choose Quick setup and application will guide you through all basic configuration settings in a couple of easy steps.
An advanced menu is available to fully configure all necessary settings.
Configuration
The device is preconfigured as a wireless client (CPE), and all you need to do is select the AP to connect to and set a device password. You can do this in
the quickSET tab that is loaded by default. In case IP connection is not available, Winbox can be used to connect to the MAC address of the device.
In case you wish to boot the device from the network, for example, to use MikroTik Netinstall, hold the RESET button of the device when starting it, until
the LED light turns off, then the device will start to look for Netinstall servers.
More information about using RouterOS and connecting to this device in our documentation: .https://mt.lv/help
Mounting
The device comes bundled with a metal mounting ring, which can be used on one of the three mounting slots on the backside of the device.
Use a Phillips screwdriver to loosen the metal ring.
Slide one end of it through the most convenient of the three mounting slots.
Position the device on the pole where it will be mounted.
Slide the loose end of the mounting ring back to its closing latch and use the screwdriver to tighten it.
The included ring mount allows for mounting on 3-7 cm diameter poles.
The IP rating scale for this device is IP54. When mounting outdoors, please ensure that any cable openings are directed downwards. We
recommend using POE injector and proper grounding. When using and installing this device please pay attention to Maximum Permissible
Exposure (MPE) safety distance with a minimum of 20 cm between the radiator and your body.
1.
2.
3.
Specially designed for the SQ series enables vertical and horizontal adjustment on the pole.
Powering
The SQ series only accepts DC power from Passive PoE injectors (one power supply and PoE injector are included)
accepts 10-30 V DC consuming at maximum load 5 W.
SXTsq Lite2
SXTsq Lite2
SXTsq Lite2
SXTsq Lite2SXTsq Lite2
accepts 10-30 V DC consuming at maximum load 6 W.
SXTsq Lite5
SXTsq Lite5
SXTsq Lite5
SXTsq Lite5SXTsq Lite5
accepts 10-28 V DC consuming at maximum load 7 W.
SXTsq 5 ac
SXTsq 5 ac
SXTsq 5 ac
SXTsq 5 acSXTsq 5 ac
accepts 10-28 V DC consuming at maximum load 7 W.
SXTsq 5 High Power
SXTsq 5 High Power
SXTsq 5 High Power
SXTsq 5 High PowerSXTsq 5 High Power
Connecting to a PoE Adapter:
Connect the Ethernet cable from the device to the PoE+DATA port of the PoE adapter.
Connect an Ethernet cable from your local network (LAN) to the PoE adapter.
Connect the power cord to the adapter, and then plug the power cord into a power outlet.
Extension Slots and Ports
One Ethernet 10/100 Mbit ( Gigabit Ethernet), supporting automatic cross/straight cable correction (Auto MDI/X), so you can use
SXTsq 5 ac –
SXTsq 5 ac –
SXTsq 5 ac –
SXTsq 5 ac –SXTsq 5 ac –
either straight or cross-over cables for connecting to other network devices.
One Integrated Wireless:
SXTsq Lite22.4 GHz, 802.11b/g/n, antenna gain 10 dBi.
SXTsq Lite22.4 GHz, 802.11b/g/n, antenna gain 10 dBi.
SXTsq Lite22.4 GHz, 802.11b/g/n, antenna gain 10 dBi.
SXTsq Lite22.4 GHz, 802.11b/g/n, antenna gain 10 dBi.SXTsq Lite22.4 GHz, 802.11b/g/n, antenna gain 10 dBi.
SXTsq Lite55 GHz, 802.11a/n, antenna gain 16 dBi.
SXTsq Lite55 GHz, 802.11a/n, antenna gain 16 dBi.
SXTsq Lite55 GHz, 802.11a/n, antenna gain 16 dBi.
SXTsq Lite55 GHz, 802.11a/n, antenna gain 16 dBi.SXTsq Lite55 GHz, 802.11a/n, antenna gain 16 dBi.
SXTsq 5 ac5 GHz, 802.11a/n/ac, antenna gain 16 dBi.
SXTsq 5 ac5 GHz, 802.11a/n/ac, antenna gain 16 dBi.
SXTsq 5 ac5 GHz, 802.11a/n/ac, antenna gain 16 dBi.
SXTsq 5 ac5 GHz, 802.11a/n/ac, antenna gain 16 dBi.SXTsq 5 ac5 GHz, 802.11a/n/ac, antenna gain 16 dBi.
SXTsq 5 High Power5 GHz, 802.11a/n, antenna gain 16 dBi.
SXTsq 5 High Power5 GHz, 802.11a/n, antenna gain 16 dBi.
SXTsq 5 High Power5 GHz, 802.11a/n, antenna gain 16 dBi.
SXTsq 5 High Power5 GHz, 802.11a/n, antenna gain 16 dBi.SXTsq 5 High Power5 GHz, 802.11a/n, antenna gain 16 dBi.
Buttons and Jumpers
The routerBOOT reset button has the following functions. Press the button and apply the power, then:
Release the button when green LED starts flashing, to reset RouterOS configuration to defaults.
Release the button when the LED turns solid green to clear all configuration and defaults.
Release the button after LED is no longer lit (~20 seconds) to cause the device to look for Netinstall servers (required for reinstalling RouterOS
over the network).
It's recommended to secure Ethernet cable to the pole using zip ties. With the distance from the device approximately 30 cm.
As an additional option, you can use "quickMOUNT-X" – mounting bracket for easy adjustment that can be obtained separately. Product web
page: https://mikrotik.com/product/qm_x

Produktspecifikationer

Varumärke: Mikrotik
Kategori: Inte kategoriserad
Modell: SXTsq 5 ac

Behöver du hjälp?

Om du behöver hjälp med Mikrotik SXTsq 5 ac ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Mikrotik Manualer

Mikrotik

Mikrotik CRS320-8P-8B-4S Bruksanvisning

24 September 2024
Mikrotik

Mikrotik SXTsq Lite2 Bruksanvisning

23 September 2024
Mikrotik

Mikrotik LtAP LR8 LTE6 kit Bruksanvisning

22 September 2024
Mikrotik

Mikrotik Woobm-USB Bruksanvisning

20 September 2024
Mikrotik

Mikrotik CME22-2n-BG77 Bruksanvisning

16 September 2024
Mikrotik

Mikrotik CRS310-8G+2S+IN Bruksanvisning

15 September 2024
Mikrotik

Mikrotik CRS354-48G-4S+2Q+RM Bruksanvisning

14 September 2024
Mikrotik

Mikrotik CRS354-48P-4S+2Q+RM Bruksanvisning

14 September 2024
Mikrotik

Mikrotik CSS326-24G-2S+RM Bruksanvisning

14 September 2024
Mikrotik

Mikrotik hAP ac³ Bruksanvisning

14 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024