Milwaukee 49-40-6110 Bruksanvisning

Milwaukee Slipmaskin 49-40-6110

Läs nedan 📖 manual på svenska för Milwaukee 49-40-6110 (12 sidor) i kategorin Slipmaskin. Denna guide var användbar för 17 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/12

Cat. No. / No de cat.

49-40-6110

CUTTING DUST SHROUD

DÉFLECTEUR DE POUSSIÈRE DE COUPE

CUBIERTA PARA CORTE PROTECTORA DEL POLVO

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

GENERAL SAFETY WARNINGS

WARNING

WHE N USI NG THE CUT T ING

D U S T S H R O U D , B A S I C

PRECAUTIONS SHOULD ALWAYS BE FOL-

LOWED, INCLUDING THE FOLLOWING: READ

THIS OPERATOR’S MANUAL, AS WELL AS

YOUR TOOL AND VACUUM OPERATOR’S

M A N U A L S , A N D AL L L A B E L S O N T H E

SHROUD, TOOL, AND VACUUM. FOR HOUSE-

HOLD OR COMMERCIAL USE.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

• Do not use in the presence of explosive dust,

liquids or vapors.

• Do not use where oxygen or anesthetics are used.

• Do not allow to be used as a toy. Close attention is

necessary when used by or near children.

• Use extra care when using on stairs.

ELECTRICAL SAFETY

• Do not pick up wet material. Do not use water to

settle dust.

PERSONAL SAFETY

• STAY ALERT. Watch what you are doing and use

common sense. Do not use dust extractor when you

are tired, distracted or under the inuence of drugs,

alcohol or medication causing diminished control.

• The operation of a dust extractor can result in for-

eign objects being blown into eyes, which can result

in eye damage. Always wear safety goggles or glasses

with side shields when operating dust extractor.

• Wear a dust mask or use an OSHA compliant dust

extraction solution when working in dusty situations.

Dust particles can harm your lungs.

• Do not overreach. Keep proper footing and balance

at all times. This enables better control of the dust

extractor in unexpected situations.

• Keep hair, loose clothing, ngers, and all parts of

body away from openings and moving parts.

• Use only as described in this manual. Use only

manufacturer’s recommended attachments.

USE AND CARE

• Do not use to pick up ammable or combustible

liquids such as gasoline or use in areas where they

may be present.

• Do not pick up anything that is burning or smoking

such as cigarettes, matches, or hot ashes.

• Do not pick up soot, cement, plaster or drywall

dust without lter in place. These are very ne

particles that may a󰀨ect the performance of the motor

or be exhausted back into the air.

•This product is suitable for collection of silica dust

when used in accordance with these instructions.

To reduce the risk of health hazards from other

vapors or dust, do not vacuum carcinogenic, toxic

or hazardous materials such as asbestos, arsenic,

barium, beryllium, lead, pesticides or other health

endangered materials.

•

WARNING

Some dust created by power sanding,

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

lter out microscopic particles.

• Do not put any object into openings. Do not use

with any opening blocked; keep free of dust, lint, hair,

and anything else that may reduce air ow.

• Maintain dust extractor. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may a󰀨ect the dust

extractor's operation. If damaged, have the dust

extractor repaired before use. Many accidents are

caused by poorly maintained tools.

• Maintain labels and nameplates. These carry im

portant information. If unreadable or missing, contact

a MILWAUKEE service facility for a free replacement.

SERVICE

• Have your power tool serviced by a qualied repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

SPECIFIC SAFETY RULES

•The cutting dust shroud is compliant with Table 1 of

OSHA Standard 29CRF 1926.1153 assuming (1) it is

used in accordance with MILWAUKEE instructions;

(2) it is attached to a dust collector that has a lter

with 99% or greater e󰀩ciency and a lter-cleaning

mechanism; and (3) the dust collector has above

125 CFM. Please reference https://www.osha.gov

for further details on compliance methods.

•Before using the cutting dust shroud, read this

operator’s manual, your tool and vacuum manuals,

and all labels on the shroud, tool, and vacuum.

• Wear ear protectors. Exposure to noise can cause

hearing loss.

• Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring. Cutting ac

cessories contacting a “live” wire may make exposed

metal parts of the power tool “live” and could give the

operator an electric shock.

• Only install diamond abrasive wheels according to

instructions. Flap discs and resin bonded grinding

wheels are not acceptable for this shroud.

READ AND SAVE ALL

INSTRUCTIONS

FOR FUTURE USE

SPECIFICATIONS

Cat. No. 49-40-6110

................................................

Vacuum Port Outer Diameter ...................... 1-7/16"

Vacuum Port Inner Diameter 1-1/8"

.........................

Adaptor Outer Diameter ................................1-3/4"

Adaptor Inner Diameter 1-1/2"

.................................

Cutting Wheel Capacity .........................4-1/2" or 5"

NOTE:

For grinder model compatibility, see Assembly

instructions regarding the collar design. The shroud

will not work on grinders that do not have the same

spindle collar design.

Produktspecifikationer

Varumärke:	Milwaukee
Kategori:	Slipmaskin
Modell:	49-40-6110

Behöver du hjälp?

Om du behöver hjälp med Milwaukee 49-40-6110 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Slipmaskin Milwaukee Manualer

Milwaukee 2781-21 Bruksanvisning

8 Oktober 2024

Milwaukee 0725-21 Bruksanvisning

5 Oktober 2024

Milwaukee 2784-20 Bruksanvisning

3 Oktober 2024

Milwaukee 6121-31 Bruksanvisning

22 September 2024

Milwaukee HD18 AG115 Bruksanvisning

21 September 2024

Milwaukee AG 9-125 XE Bruksanvisning

21 September 2024

Milwaukee AGV 21-230 GEX Bruksanvisning

21 September 2024

Milwaukee HD18 AG125 Bruksanvisning

21 September 2024

Milwaukee DGL 34 Bruksanvisning

21 September 2024

Milwaukee DG 30 E Bruksanvisning

21 September 2024

Slipmaskin Manualer

Nyaste Slipmaskin Manualer

Makita 9562CVR Bruksanvisning

8 Januari 2025

Bosch GWS 18V-8 Professional Bruksanvisning

6 Januari 2025

DeWalt DCG415B Bruksanvisning

4 Januari 2025

Einhell TC-AG 18/115 Li Bruksanvisning

1 Januari 2025

DeWalt DWE4115 Bruksanvisning

31 December 2025

Black Decker 4292 Bruksanvisning

31 December 2025

Powerplus POWX06250 Bruksanvisning

31 December 2025

Hazet 9032M-36 Bruksanvisning

31 December 2025

Alpha Tools WS 230-3 Bruksanvisning

29 December 2024

Einhell WS 230-4 Bruksanvisning

29 December 2024