Milwaukee M12 TOUGHSHELL 204-21 Bruksanvisning

Milwaukee Inte kategoriserad M12 TOUGHSHELL 204-21

Läs nedan 📖 manual på svenska för Milwaukee M12 TOUGHSHELL 204-21 (8 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
Cat. No. / No de cat.
204 Series, 224 Series
M12 HEATED MULTI-ZONE JACKET
VESTE CHAUFFANTE M12
CHAMARRA CALEFACTADA M12™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
IMPORTANT SAFETY INSTRUCTIONS
WARNING
REA D AND UNDERS TAND
ALL INSTRUCTIONS. Failure to
follow all instructions listed below, may result in
electric shock, re and/or serious personal injury.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
ELECTRICAL SAFETY
Do not expose heated gear to rain or wet condi-
tions. Water will increase the risk of electric shock.
Do not abuse the power cable. Never use the
cord for carrying, pulling or unplugging the
heated gear. Keep cord away from heat, oil,
sharp edges or moving parts.
PERSONAL SAFETY
Stay alert, watch what you are doing and use
common sense when using the heated gear. Do
not use while you are tired or under the inu-
ence of drugs, alcohol or medication. A moment
of inattention may result in serious personal injury.
PRODUCT USE AND CARE
Do not use the heated gear if the power button
does not turn it on and o󰀨. Any heated gear that
cannot be controlled with the power button is dan-
gerous and must be repaired.
Disconnect the battery pack from the heated gear
before storing. Such preventive safety measures re-
duce the risk of starting the heated gear accidentally.
Store out of the reach of children and do not al-
low persons unfamiliar with these instructions
to operate the heated gear. Heated gear can be
dangerous in the hands of untrained users.
Maintain heated gear. Check for breakage of
parts and any other condition that may a󰀨ect
the heated gear’s operation. If damaged, have
the heated gear repaired before use.
Use the heated gear in accordance with these
instructions, taking into account the working
conditions and the work to be performed. Use
of the heated gear for operations di󰀨erent from
those intended could result in a hazardous situation.
BATTERY TOOL USE AND CARE
Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
Use heated gear only with specically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and re.
When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, ush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
SERVICE
Have your heated gear serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the heated
gear is maintained.
SPECIFIC SAFETY RULES FOR
HEATED GEAR
Read instructions carefully.
Use:
Do not use this heated gear with an infant, child,
a helpless person, or anyone insensitive to heat,
such as a person with poor blood circulation.
If you have a medical condition making you sen-
sitive to overheating, or you use any personal
medical devices, consult the device manufacturer
and/or your physician to determine if use of this
product is appropriate.
Never use if inner liner is wet.
Heating elements are not recommended to touch
bare skin.
Shut o󰀨 power immediately if discomfort occurs.
Do not allow the cords to be pinched.
If improper operation of this heated gear is
observed, discontinue its use immediately and
contact a MILWAUKEE service facility for repair.
Do not use pins. They may damage the electric wiring.
Care:
Before washing, disconnect and remove battery
pack and battery controller from battery pocket.
Push the power cord completely into the battery
controller pocket and zip all pockets closed. Zip
center front zipper closed before washing.
Follow Care Instructions on gear tags. Machine
wash, Gentle Cycle in warm water. Tumble Dry
Low Heat.
Do not bleach.
Do not iron.
Do not wring or twist.
Do not dry clean. Do not use dry-cleaning uid on
this heated gear. Do not bleach. Cleaning solvents
may have a deteriorating e󰀨ect on the insulation of
the heating element.
Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
SYMBOLOGY
Volts
Direct Current
Machine wash, gentle cycle in warm water
Do not bleach
Do not wring or twist
Tumble dry, low heat
Do not iron
Do not dry-clean
3
SPECIFICATIONS
Cat. No. 204 Series, 224 Series .............................
Volts 12 DC..............................................................
Battery Type .................................................M12™
Charger Type................................................M12™
FUNCTIONAL DESCRIPTION
1. Power button:
Outside on 204
Inside on 224
Left side: core zone
Right side: secondary zone
2. Power cable
3. Battery controller pocket
23
1
ASSEMBLY
WARNING
Recharge only with the charger
specied for the battery. For spe-
cic charging instructions, read the operator’s
manual supplied with your charger and battery.
Inserting/Removing the Battery
To insert the battery, slide the pack into the body of
the battery controller. Make sure it latches securely
into place.
Insert the power cable (from inside the pocket) into
the power cable port on the battery controller.
Push the power cable completely into the battery
controller pocket and zip all pockets closed.
To remove the battery, push in the release buttons
and pull the battery pack away from the controller.
OPERATION
The power button is located on the upper left side of
the heated gear, inside on some models.
To turn on, press and hold (about 2 seconds) the
power button. The core (upper chest) and secondary
(lower chest) zones will be turned to High and the
LEDs will light.
Temperature setting can be adjusted at any time
by pressing the power button. Each press will cycle
through the temperature settings.
To turn o󰀨, press and hold (about 2 seconds) the
power button. The LEDs will turn o󰀨.
If the heated gear turns o󰀨 unexpectedly, check
connections and charge the battery pack. Battery
controller is located inside of pocket.
CARE
WARNING
To reduce the risk of injury, always
unplug the charger and remove the
battery pack and battery controller from the
heated gear before performing any maintenance.
Never disassemble the heated gear, battery pack
or charger. Contact a MILWAUKEE service facil-
ity for ALL repairs.
If the heated gear does not start or operate properly
with a fully charged battery pack, clean the contacts
on the battery pack. If the heated gear still does not
work properly, return the heated gear, charger and
battery pack, to a MILWAUKEE service facility for
repairs.
WARNING
To reduce the risk of personal in-
jury and damage, disconnect and
remove battery pack and battery controller from
battery controller pocket before washing. Never
immerse your battery controller, battery pack, or
charger in liquid or allow a liquid to ow inside
them.
To clean the heated gear:
1. Remove battery pack and battery controller.
2. Push the power cord completely into the battery
controller pocket and fasten closed. Zip center
front zipper closed before washing.
3. Machine wash, Gentle Cycle in warm water. Do
not use bleach. Do not dry clean. Do not wring or
twist.
4. Tumble Dry on Low Heat. Do not iron.
ACCESSORIES
WARNING
Use only recommended accesso-
ries. Others may be hazardous.
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a distributor.
SERVICE - UNITED STATES
1-800-SAWDUST (1.800.729.3878)
Monday-Friday, 7:00 AM - 6:30 PM CST
or visit www.milwaukeetool.com
Contact Corporate After Sales Service Technical
Support with technical, service/repair, or warranty
questions.
Email: metproductsupport@milwaukeetool.com
B e c o m e a H e a v y D u ty Cl u b Me mb e r a t
www.milwaukeetool.com to receive important
notications regarding your tool purchases.
SERVICE - CANADA
Milwaukee Tool (Canada) Ltd
1.800.268.4015
Monday-Friday, 7:00 AM - 4:30 PM CST
or visit www.milwaukeetool.ca
LIMITED WARRANTY
USA & CANADA
Every MILWAUKEE HEATED GEAR product (including its battery holder/
controller) is warranted to the original purchaser only to be free from defects
in material and workmanship. Subject to certain exceptions, MILWAUKEE
will repair or replace any part on a Heated Gear product which, after
examination, is determined by MILWAUKEE to be defective in material or
workmanship for a period of one (1) year* after the date of purchase. Return
of a Heated Gear product to a MILWAUKEE factory Service Center location,
freight prepaid and insured, is required. A copy of the proof of purchase
should be included with the return product. This warranty does not apply to
damage that MILWAUKEE determines to be from repairs made or attempted
by anyone other than MILWAUKEE personnel, misuse, alterations, abuse,
normal wear and tear, or accidents.
*This warranty does not cover a M12LITHIUM-ION Battery Pack, a M12™
Charger, or a REDLITHIUM™ USB battery; there are separate and distinct
warranties available for these products.
Warranty Registration is not necessary to obtain the applicable warranty on
MILWAUKEE Heated Gear products. The manufacturing date of the product
will be used to determine the warranty period if no proof of purchase is
provided at the time warranty service is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT
REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT
FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO
NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE
PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY

Produktspecifikationer

Varumärke: Milwaukee
Kategori: Inte kategoriserad
Modell: M12 TOUGHSHELL 204-21

Behöver du hjälp?

Om du behöver hjälp med Milwaukee M12 TOUGHSHELL 204-21 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Milwaukee Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer