Milwaukee M18 Fuel 2861-22 Bruksanvisning
Milwaukee
Skruvmaskin
M18 Fuel 2861-22
Läs nedan 📖 manual på svenska för Milwaukee M18 Fuel 2861-22 (16 sidor) i kategorin Skruvmaskin. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/16
Cat. No. / No de cat.
2852-20, 2860-20, 2861-20
M18™ FUEL™ MID-TORQUE IMPACT WRENCHES
CLÉS À CHOCS À COUPLE MOYEN M18™ FUEL™
LLAVES DE IMPACTO DE MEDIO TORQUE M18™ FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
3
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging im-
properly or at temperatures outside the specied range
may damage the battery and increase the risk of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES
• Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator
an electric shock.
• Wear ear protectors when impact drilling. Expo-
sure to noise can cause hearing loss.
• Use only sockets and other accessories spe-
cically designed for use on impact wrenches
and drivers. Other sockets and accessories might
shatter or break causing injury.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
•
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SPECIFICATIONS Volts 18 DC..............................................................
Battery Type .................................................M18™
Charger Type M18™................................................
Recommended Ambient
Operating Temperature ......................0°F to 125°F
Cat. No. 2852-20
.....................................................
Anvil Type ...................................3/8" Square-Ring
Mode 1
No Load RPM ......................................... 0 - 575
Impacts per Minute .......................................450
Mode 2
No Load RPM ....................................... 0 - 2000
Impacts per Minute .....................................2900
Mode 3
No Load RPM ....................................... 0 - 2300
Impacts per Minute .....................................3200
Cat. No. 2860-20
.....................................................
Anvil Type ..................................... 1/2" Square-Pin
Mode 1
No Load RPM ....................................... 0 - 1700
Impacts per Minute .....................................2300
Mode 2
No Load RPM ....................................... 0 - 2100
Impacts per Minute .....................................2700
Mode 3
No Load RPM ....................................... 0 - 2400
Impacts per Minute .....................................3000
Cat. No. 2861-20
.....................................................
Anvil Type ...................................1/2" Square-Ring
Mode 1
No Load RPM ......................................... 0 - 510
Impacts per Minute .......................................420
Mode 2
No Load RPM ....................................... 0 - 2100
Impacts per Minute .....................................2700
Mode 3
No Load RPM ....................................... 0 - 2400
Impacts per Minute .....................................3000
FUNCTIONAL DESCRIPTION
1. 1/2" Square drive anvil with pin (2860-20)
2. LED
3. Control switch
4. Trigger
5. 3-Mode drive control
6 Belt clip.
7. 1/2" Square drive anvil with ring (2861-20)
8. 3/8" Square drive anvil with ring (2852-20)
1
2
45
3
7
6
8
Produktspecifikationer
| Varumärke: | Milwaukee |
| Kategori: | Skruvmaskin |
| Modell: | M18 Fuel 2861-22 |
Behöver du hjälp?
Om du behöver hjälp med Milwaukee M18 Fuel 2861-22 ställ en fråga nedan och andra användare kommer att svara dig
Skruvmaskin Milwaukee Manualer
30 December 2025
30 December 2025
26 December 2024
7 Oktober 2024
4 Oktober 2024
27 September 2024
26 September 2024
24 September 2024
23 September 2024
23 September 2024
Skruvmaskin Manualer
- Skruvmaskin Bosch
- Skruvmaskin AEG
- Skruvmaskin DeWalt
- Skruvmaskin Silverline
- Skruvmaskin Toolland
- Skruvmaskin Ferm
- Skruvmaskin Ozito
- Skruvmaskin Gude
- Skruvmaskin Makita
- Skruvmaskin Hitachi
- Skruvmaskin Black And Decker
- Skruvmaskin Vonroc
- Skruvmaskin Stanley
- Skruvmaskin Skil
- Skruvmaskin Yato
- Skruvmaskin Hilti
- Skruvmaskin Ryobi
- Skruvmaskin Festool
- Skruvmaskin Metabo
- Skruvmaskin Parkside
- Skruvmaskin Worx
- Skruvmaskin Meec Tools
- Skruvmaskin Hikoki
- Skruvmaskin EMOS
- Skruvmaskin Dremel
- Skruvmaskin Tacklife
- Skruvmaskin Hazet
- Skruvmaskin Einhell
- Skruvmaskin Maktec
- Skruvmaskin Steren
- Skruvmaskin Craftsman
- Skruvmaskin Biltema
- Skruvmaskin Power Craft
- Skruvmaskin Powerplus
- Skruvmaskin Porter-Cable
- Skruvmaskin Cotech
- Skruvmaskin Beta
- Skruvmaskin Kraftwerk
- Skruvmaskin Powerfix
- Skruvmaskin Matrix
- Skruvmaskin Kress
- Skruvmaskin Bavaria
- Skruvmaskin Kawasaki
- Skruvmaskin Greenworks
- Skruvmaskin Fieldmann
- Skruvmaskin Basetech
- Skruvmaskin Fuxtec
- Skruvmaskin Laserliner
- Skruvmaskin Truper
- Skruvmaskin Bruder Mannesmann
- Skruvmaskin Cocraft
- Skruvmaskin Meister Craft
- Skruvmaskin Toolcraft
- Skruvmaskin Batavia
- Skruvmaskin Westfalia
- Skruvmaskin StarTech.com
- Skruvmaskin Fein
- Skruvmaskin Park Tool
- Skruvmaskin Black Decker
- Skruvmaskin Elu
- Skruvmaskin Goon
- Skruvmaskin Dedra
- Skruvmaskin Sthor
- Skruvmaskin Pansam
- Skruvmaskin Gedore
- Skruvmaskin Wiha
- Skruvmaskin Alpha Tools
- Skruvmaskin SW-Stahl
- Skruvmaskin Cleco
- Skruvmaskin MSW
- Skruvmaskin Weidmüller
- Skruvmaskin Einhell Bavaria
- Skruvmaskin Proviel
- Skruvmaskin Wera
- Skruvmaskin Rodcraft
- Skruvmaskin Ingersoll Rand
- Skruvmaskin Bavaria By Einhell
- Skruvmaskin Prowork
- Skruvmaskin Chicago Pneumatic
- Skruvmaskin Facom
- Skruvmaskin TAURUS Titanium
- Skruvmaskin Total
- Skruvmaskin Netter Vibration
Nyaste Skruvmaskin Manualer
13 Januari 2025
12 Januari 2025
8 Januari 2025
5 Januari 2025
5 Januari 2025
4 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025