Milwaukee M18 Switch Tank 2820-21PS Bruksanvisning

Milwaukee Inte kategoriserad M18 Switch Tank 2820-21PS

Läs nedan 📖 manual på svenska för Milwaukee M18 Switch Tank 2820-21PS (20 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/20

Cat. No. / No de cat.

2820-20, 49-16-28PS, 49-16-28CS, 49-16-28WS

M18™ SWITCH TANK™ POWERED BASE, SPRAYER TANK ASSEMBLY,

CONCRETE SPRAYER TANK ASSEMBLY, WATER SUPPLY TANK ASSEMBLY

BASE ÉLECTRIQUE SWITCH TANK™ M18™, ENSEMBLE RÉSERVOIR-

PULVÉRISATEUR, ENSEMBLE RÉSERVOIR-PULVÉRISATEUR POUR

BÉTONNAGE, ENSEMBLE RÉSERVOIR-PULVÉRISATEUR POUR VERSAGE

D’EAU

BASE MOTORIZADA SWITCH TANK™ M18™, CONJUNTO DE TANQUE

ROCIADOR, CONJUNTO DE TANQUE ROCIADOR DE CONCRETO,

CONJUNTO DE TANQUE DE SUMINISTRO DE AGUA

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

IMPORTANT

SAFETY

INSTRUCTIONS

WARNING

Read all safety warnings, instruc-

tions, illustrations and specica-

tions provided with this power tool. Failure to

follow all instructions listed below may result in

electric shock, re and/or serious injury. Save all

warnings and instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-oper-

ated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

• Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

• Keep children and bystanders away while operat-

ing a power tool. Distractions can cause you to lose

control.

ELECTRICAL SAFETY

• Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the

risk of electric shock.

• Outdoor use. Do not expose to rain; store in-

doors.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

• Use personal protective equipment. Always

wear eye protection. Protective equipment such

as a dust mask, non-skid safety shoes, hard hat or

hearing protection used for appropriate conditions

will reduce personal injuries.

• Prevent unintentional starting. Ensure the switch

is in the o󰀨-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on

the switch or energizing power tools that have the

switch on invites accidents.

• Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or

jewelry. Keep your hair and clothing away from

moving parts. Loose clothes, jewelry or long hair

can be caught in moving parts.

• Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles. A careless action can

cause severe injury within a fraction of a second.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power

tool for your application. The correct power tool

will do the job better and safer at the rate for which

it was designed.

• Do not use the power tool if the switch does not

turn it on and o󰀨. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

• Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

• Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands

of untrained users.

• Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition that

may a󰀨ect the power tool’s operation.

• Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed. Use of the power tool

for operations di󰀨erent from those intended could

result in a hazardous situation.

• Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used

with another battery pack.

• Use power tools only with specically designated

battery packs. Use of any other battery packs may

create a risk of injury and re.

• When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal

to another. Shorting the battery terminals together

may cause burns or a re.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact ac-

cidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

• Do not use a battery pack or tool that is dam-

aged or modied. Damaged or modied batteries

may exhibit unpredictable behavior resulting in re,

explosion or risk of injury.

• Do not expose a battery pack or tool to re or

excessive temperature. Exposure to re or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specied in the instructions. Charging

improperly or at temperatures outside the specied

range may damage the battery and increase the risk

of re.

SERVICE

• Have your power tool serviced by a qualied

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

BACKPACK SPRAYER

•

WARNING

Risk of re or explosion. Do not

spray ammable liquids such as

gasoline, solvents, or gas producing chemicals.

Do not use tool around spark, ame, or smoke.

Chemical may ignite.

• Use the correct tank for your application. These

products are suitable for pesticide applications

(such as insecticides, fungicides, or herbicides),

fertilizers, concrete applications (such as non-

ammable sealants, curing compounds and form

oil), and water supply applications, when used

in accordance with these instructions and those

supplied with the chemicals.

• Do not use bleach, caustic (alkali) self-heating

or corrosive (acid) liquids in this sprayer. Do not

pour hot or boiling liquids into the tank. These

can corrode metal parts or weaken the tank and

hose.

• To reduce the risk of re, personal injury, and

product damage due to a short circuit, never

immerse your tool, battery pack or charger in

uid or allow a uid to ow inside them. Do not

place or store tool where it can fall or be pulled

into a tub or sink. Corrosive or conductive uids,

such as seawater, certain industrial chemicals,

and bleach or bleach containing products, etc.,

can cause a short circuit.

• Electric shock hazard. Never spray toward

electrical outlets.

• Spray area must be well ventilated to avoid

hazardous fumes build-up.

• Avoid spraying on windy days. Spray can be

blown onto people, plants, or objects that should

not be sprayed.

• Do not store chemicals in the tank. Chemicals

can degrade seals and hoses. Drain and clean

after each use.

•Remove gloves before handling battery packs.

Chemicals are harmful to plastics.

• Maintain your power tool. Thoroughly inspect

inside and outside and examine all compo-

nents before each use. Check for cracked and

deteriorated hoses, leaks, clogged nozzles, and

missing or damaged parts. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

• Always unplug the charger and remove the battery

pack from the charger or tool before performing

any maintenance, storing, or draining the tool.

Never disassemble the tool, battery pack or

charger. Contact a MILWAUKEE service facility

for ALL repairs.

• Do not eat or smoke while handling or operating

the tool. After use, wash with hot, soapy water

to help reduce the risk of health hazards due to

exposure to chemicals.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Do not use the battery compartment for storage.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

•

WARNING

Some dust created by power sanding,

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well-ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

lter out microscopic particles.

SAVE THESE

INSTRUCTIONS

SYMBOLOGY

Volts

Direct Current

Read operator's manual

PPE

Wear personal protective equipment

(PPE) according to the chemical

manufacturer's instructions.

Wear eye protection

Wear gloves

Do not spray ammable liquids

C US

UL Listing for Canada and U.S.

Produktspecifikationer

Varumärke:	Milwaukee
Kategori:	Inte kategoriserad
Modell:	M18 Switch Tank 2820-21PS

Behöver du hjälp?

Om du behöver hjälp med Milwaukee M18 Switch Tank 2820-21PS ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Inte kategoriserad Milwaukee Manualer

Milwaukee M12 302-21 Bruksanvisning

14 Oktober 2024

Milwaukee M12 HammerVac 2306-22 Bruksanvisning

30 September 2024

Milwaukee M18 Radius ONE-KEY 2150-20 Bruksanvisning

24 September 2024

Milwaukee MXF041 Bruksanvisning

24 September 2024

Milwaukee ROLL-ON 3300R Bruksanvisning

24 September 2024

Milwaukee MXF NRG Bruksanvisning

23 September 2024

Milwaukee TRB 1 Bruksanvisning

23 September 2024

Milwaukee M12 IR-201B Bruksanvisning

23 September 2024

Milwaukee L4 PPS Bruksanvisning

23 September 2024

Milwaukee M18 Switch Tank 2820-21PS Bruksanvisning

23 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024

Manhattan 461504 Bruksanvisning

27 Oktober 2024

Sungrow SG125HV Bruksanvisning

27 Oktober 2024

Schneider CCT724319 Bruksanvisning

27 Oktober 2024

Technoline WS 250 Bruksanvisning

27 Oktober 2024

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024

Kupper 12152 Bruksanvisning

27 Oktober 2024

JennAir CARBON24L Bruksanvisning

27 Oktober 2024

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024