Mitsubishi PUZ-M100-140VKA-A Bruksanvisning

Mitsubishi Luftkonditionering PUZ-M100-140VKA-A

Läs nedan 📖 manual på svenska för Mitsubishi PUZ-M100-140VKA-A (16 sidor) i kategorin Luftkonditionering. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/16
English
Air-Conditioners
PUZ-M100, M125, M140VKA-A
INSTALLATION MANUAL
For safe and correct use, read this manual and the indoor unit installation manual thoroughly before installing
the air-conditioner unit.
FOR INSTALLER
1
en
MEANINGS OF SYMBOLS DISPLAYED ON THE UNIT
WARNING
(Risk of re)
This mark is for R32 refrigerant only. Refrigerant type is written on nameplate of outdoor unit.
In case that refrigerant type is R32, this unit uses a ammable refrigerant.
If refrigerant leaks and comes in contact with re or heating part, it will create harmful gas and there is risk of re.
Read the OPERATION MANUAL carefully before operation.
Service personnel are required to carefully read the OPERATION MANUAL and INSTALLATION MANUAL before operation.
Further information is available in the OPERATION MANUAL, INSTALLATION MANUAL, and the like.
Contents
1. Safety precautions
►
Before installing the unit, make sure you read all the “Safety precautions”.
►Pleasereporttoortakeconsentbythesupplyauthoritybeforeconnectionto
the system.
After installation work has been completed, explain the “Safety Precautions,” use, and
maintenance of the unit to the customer according to the information in the Operation
Manual and perform the test run to ensure normal operation. Both the Installation Manual
and Operation Manual must be given to the user for keeping. These manuals must be
passed on to subsequent users.
: Indicates a part which must be grounded.
Warning:
Carefullyreadthelabelsafxedtothemainunit.
/ : Indicates warnings and cautions when using R32 refrigerant.
Warning:
• Theunitmustnotbeinstalledbytheuser.Askadealeroranauthorizedtechni-
cian to install and repair the unit. If the unit is installed incorrectly, water leakage,
electricshock,orremayresult.
• For installation and relocation work, follow the instructions in the Installation
Manualanduse toolsand pipecomponents specicallymade foruse withR32
refrigerant. If pipe components not designed for R32 refrigerant are used and the
unitisnotinstalledcorrectly,thepipesmayburstandcausedamageorinjuries.
Inaddition,waterleakage,electricshock,orremayresult.
• Theunitmustbeinstalledaccordingtotheinstructionsinordertominimizethe
risk of damage from earthquakes, typhoons, or strong winds. An incorrectly in-
stalledunitmayfalldownandcausedamageorinjuries.
•
Theunitmustbesecurelyinstalledonastructurethatcansustainitsweight.Iftheunit
ismountedonanunstablestructure,itmayfalldownandcausedamageorinjuries.
• If the air conditioner is installed in a small room, measures must be taken to
preventtherefrigerantconcentrationintheroomfromexceedingthesafetylimit
in the event of refrigerant leakage. Consult a dealer regarding the appropriate
measures to preventthe allowable concentration frombeing exceeded.Should
the refrigerant leak and cause the concentration limit to be exceeded, hazards
duetolackofoxygenintheroommayresult.
• Ventilate the room if refrigerant leaks during operation. If refrigerant comes into
contactwithaame,poisonousgaseswillbereleased.
• Allelectricworkmustbeperformedbyaqualiedtechnicianaccordingtolocal
regulationsandtheinstructionsgiveninthismanual.Theunitsmustbepowered
bydedicated power linesand the correctvoltage and circuit breakersmust be
used.Powerlineswithinsufcientcapacityorincorrectelectricalworkmayresult
inelectricshockorre.
• Use C1220 copper phosphorus, for copper and copper alloy seamless pipes, to
connect the refrigerant pipes. If the pipes are not connected correctly, the unit will
notbeproperlygroundedandelectricshockmayresult.
• Thisapplianceisintendedtobeusedbyexpertortrainedusersinshops,inlight
industryandonfarms,orforcommercialusebylaypersons.
• Useonlyspeciedcablesforwiring.Thewiringconnectionsmustbemadese-
curely with no tension applied on the terminal connections. Also, never splice the
cablesforwiring(unlessotherwiseindicatedinthisdocument).
 Failuretoobservetheseinstructionsmayresultinoverheatingorare.
• Ifthesupplycordisdamaged,itmustbereplacedbythemanufacturer,itsservice
agentorsimilarlyqualiedpersonsinordertoavoidhazard.
• Theapplianceshallbeinstalledinaccordancewithnationalwiringregulations.
• Theterminalblockcoverpaneloftheoutdoorunitmustbermlyattached.Ifthe
cover panel is mounted incorrectly and dust and moisture enter the unit, electric
shockorremayresult.
• When installing or relocating, or servicing the air conditioner, use only the speci-
edrefrigerant(R32)tochargetherefrigerantlines.Donotmixitwithanyother
refrigerant and do not allow air to remain in the lines.
 Ifairismixedwiththerefrigerant,thenitcanbethecauseofabnormalhighpres-
sureintherefrigerantline,andmayresultinanexplosionandotherhazards.
 Theuseofanyrefrigerantotherthanthatspeciedforthesystemwillcauseme-
chanicalfailureorsystemmalfunctionorunitbreakdown.Intheworstcase,this
could lead to a serious impediment to securing product safety.
• UseonlyaccessoriesauthorizedbyMitsubishiElectricandaskadealeroranau-
thorizedtechniciantoinstallthem.Ifaccessoriesareincorrectlyinstalled,water
leakage,electricshock,orremayresult.
• Donotaltertheunit.Itmaycausere,electricshock,injuryorwaterleakage.
• The user should never attempt to repair the unit or transfer it to another location.
Iftheunitisinstalledincorrectly,waterleakage,electricshock,orremayresult.
Iftheair conditionermustbe repairedormoved, aska dealer oranauthorized
technician.
• Afterinstallation has beencompleted, check forrefrigerant leaks. Ifrefrigerant
leaksintotheroomandcomesintocontactwiththeameofaheaterorportable
cookingrange,poisonousgaseswillbereleased.
• Do not use means to accelerate the defrosting process or to clean, other than
thoserecommendedbythemanufacturer.
• Theapplianceshallbestoredinaroomwithoutcontinuouslyoperatingignition
sources(forexample:openames,anoperatinggasapplianceoranoperating
electricheater).
• Donotpierceorburn.
• Be aware that refrigerants may not contain an odour.
/ Pipe-workshallbeprotectedfromphysicaldamage.
• Theinstallationofpipe-workshallbekepttoaminimum.
• Compliancewithnationalgasregulationsshallbeobserved.
• Keepanyrequiredventilationopeningsclearofobstruction.
/ Donotuselowtemperaturesolderalloyincaseofbrazingtherefrigerantpipes.
/ Whenperformingbrazingwork,besuretoventilatetheroomsufciently.
 Makesurethattherearenohazardousorammablematerialsnearby.
When performing the work in a closed room, small room, or similar location, make
surethattherearenorefrigerantleaksbeforeperformingthework.
If refrigerant leaks and accumulates, it may ignite or poisonous gases may be
released.
/ Theapplianceshallbestoredinawell-ventilatedareawheretheroomsizecor-
respondstotheroomareaasspeciedforoperation.
/ Keep gas-burning appliances, electric heaters, and other re sources (ignition
sources)away fromthe locationwhere installation, repair, and otherair condi-
tionerworkwillbeperformed.
 Ifrefrigerantcomesintocontactwithaame,poisonousgaseswillbereleased.
/ Do not smoke during work and transportation.
Warning:
Describesprecautionsthatmustbeobservedtopreventdangerofinjuryordeath
to the user.
Caution:
Describesprecautionsthatmustbeobservedtopreventdamagetotheunit.
1. Safety precautions 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Installation location 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. Installing the outdoor unit 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. Installing the refrigerant piping 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. Drainage piping work 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6. Electrical work 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7. Test run 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8. Special functions 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9. System control (Fig. 9-1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Phillips screwdriver
Level
Scale
Utility knife or scissors
65 mm hole saw
Torque wrench
Wrench (or spanner)
4 mm hexagonal wrench
Flare tool for R32, R410A
Gauge manifold for R32, R410A
Vacuum pump for R32, R410A
Charge hose for R32, R410A
Pipe cutter with reamer
Appropriate personal protective equipment
The installer should ensure they check the respective Work Health and Safety
(WHS) Act within their jurisdiction as the requirements and obligations may differ.
Required Tools for Installation
Caution:
• Do not vent R32 into the atmosphere.
•Conrmthattheinstallationsatises“therequirementsinthismanual”and“therequirementsofsafetyonsiteandenvironment”.
2
en
1.1. Before installation
Caution:
• Do not use the unit in an unusual environment. If the air conditioner is installed in
areasexposedtosteam,volatileoil(includingmachineoil),orsulfuricgas,areas
exposedtohighsaltcontentsuchastheseaside,orareaswheretheunitwillbe
coveredbysnow,theperformancecanbesignicantlyreducedandtheinternal
partscanbedamaged.
• Donotinstalltheunitwherecombustiblegasesmayleak,beproduced,ow,or
accumulate. If combustible gas accumulates around the unit, re or explosion
may result.
1. Safety precautions
• The outdoor unit produces condensation during the heating operation. Make
sure to provide drainage around the outdoor unit if such condensation is likely to
cause damage.
• Wheninstallingtheunitinahospitalorcommunicationsofce,bepreparedfor
noise and electronic interference. Inverters, home appliances, high-frequency
medical equipment, and radio communications equipment can cause the air con-
ditionertomalfunctionorbreakdown.Theairconditionermayalsoaffectmedical
equipment, disturbing medical care, and communications equipment, harming
the screen display quality.
1.2.Beforeinstallation(relocation)
Caution:
• Beextremelycarefulwhentransportingorinstallingtheunits.Twoormoreper-
sons are needed to handle the unit, as it weighs 20 kg or more. Do not grasp the
packagingbands.Wearprotectiveglovestoremovetheunitfromthepackaging
and tomove it, asyou can injure yourhands on thens or theedge of other 
parts.
• Be sure to safely dispose of the packaging materials. Packaging materials, such
asnailsandothermetalorwoodenpartsmaycausestabsorotherinjuries.
• Thebaseand attachmentsof theoutdoor unitmustbeperiodicallychecked for
looseness, cracks or other damage. If such defects are left uncorrected, the unit
mayfalldownandcausedamageorinjuries.
• Do not clean the air conditioner unit with water. Electric shock may result.
• Tighten all are nuts to specication using a torque wrench. If tightened too
much,the arenutcan breakafteran extendedperiodand refrigerantcanleak
out.
1.3. Before electric work
Caution:
• Besuretoinstallcircuitbreakers.Ifnotinstalled,electricshockmayresult.
• Forthepowerlines,usestandardcablesofsufcientcapacity.Otherwise,ashort
circuit,overheating,orremayresult.
• When installingthe powerlines, donot apply tensionto thecables. Ifthe con-
nectionsareloosened,thecablescansnaporbreakandoverheatingorremay
result.
• Be sure to ground the unit. Do not connect the ground wire to gas or water pipes,
lightning rods, or telephone grounding lines. If the unit is not properly grounded,
electric shock may result.
• Use circuit breakers (ground fault interrupter, isolating switch (+B fuse), and
molded case circuit breaker) with the specied capacity. If the circuit breaker
capacityislargerthanthespeciedcapacity,breakdownorremayresult.
1.4. Before starting the test run
Caution:
• Turn on the main power switch more than 12 hours before starting operation.
Starting operation just afterturning on the power switch canseverely damage
the internal parts. Keep the main power switch turned on during the operation
season.
• Before starting operation, check that all panels, guards and other protective parts
arecorrectlyinstalled.Rotating,hot,orhighvoltagepartscancauseinjuries.
• Do not touch any switch with wet hands. Electric shock may result.
• Donottouchtherefrigerantpipeswithbarehandsduringoperation.Therefriger-
antpipesarehotorcolddependingontheconditionoftheowingrefrigerant.If
youtouchthepipes,burnsorfrostbitemayresult.
• Afterstoppingoperation,besuretowaitatleastveminutesbeforeturningoff
themainpowerswitch.Otherwise,waterleakageorbreakdownmayresult.
1.5. Using R32 refrigerant air conditioners
Caution:
• Use C1220 copper phosphorus, for copper and copper alloy seamless pipes, to
connect the refrigerant pipes. Make sure the insides of the pipes are clean and
donotcontainanyharmfulcontaminantssuchassulfuriccompounds,oxidants,
debris, ordust. Use pipeswith the speciedthickness. (Refer to4.1.) Note the
followingifreusingexistingpipesthatcarriedR22refrigerant.
- Replace the existing are nuts and are the ared sections again.
- Do not use thin pipes. (Refer to 4.1.)
• Storethepipestobeusedduringinstallationindoorsandkeepbothendsofthe
pipessealed untiljust beforebrazing.(Leave elbowjoints, etc.in theirpackag-
ing.)If dust,debris, ormoisture entersthe refrigerantlines, oildeterioration or
compressorbreakdownmayresult.
• Use ester oil, ether oil, alkylbenzene oil (small amount) as the refrigeration oil
applied tothe ared sections. Ifmineral oil ismixed in the refrigerationoil, oil
deterioration may result.
• Servicingshallbeperformedonlyasrecommendedbythemanufacturer.
• Do not use refrigerant other than R32 refrigerant.
• UsethefollowingtoolsspecicallydesignedforusewithR32refrigerant.
The following tools are necessary to use R32 refrigerant. Contact your nearest
dealer for any questions.
Tools (for R32)
Gauge manifold Flare tool
Charge hose Size adjustment gauge
Gas leak detector Vacuum pump adapter
Torque wrench Electronic refrigerant charging scale
• Besuretousethecorrecttools.Ifdust,debris,ormoistureenterstherefrigerant
lines, refrigeration oil deterioration may result.
2. Installation location
Fig. 2-1
2.1.Refrigerantpipe(Fig.2-1)
►Check that thedifference between the heights of the indoor and outdoor
units,thelengthofrefrigerantpipe,andthenumberofbendsinthepipeare
withinthelimitsshownbelow.
Models A Pipe length
(one way)
B Height
difference
C
Number of bends
(one way)
M100-140 Max. 55 m Max. 30 m Max. 15
• Height -difference limitations are binding regardless of which unit, indoor or out
door, is positioned higher.
Indoor unitD
Outdoor unitE
A
B
E
D
C
1.6.Accessoriesofoutdoorunit(Fig.1-1)
The parts show in the left are the accessories of this unit, which are afxed to the
inside of the service panel.
1 Terminal block (on lead wire) ......... ×1
2 Screw 4 × 25 .................................. ×1
3 Fastener ......................................... ×1
4 Installation manual
......................... ×1
1
CN3S
CNDM
2
3 4
manual
Fig. 1-1

Produktspecifikationer

Varumärke: Mitsubishi
Kategori: Luftkonditionering
Modell: PUZ-M100-140VKA-A

Behöver du hjälp?

Om du behöver hjälp med Mitsubishi PUZ-M100-140VKA-A ställ en fråga nedan och andra användare kommer att svara dig


Luftkonditionering Mitsubishi Manualer

Mitsubishi

Mitsubishi MXZ-8C48NA Bruksanvisning

19 Februari 2025
Mitsubishi

Mitsubishi MLZ-KP12NA2 Bruksanvisning

6 Februari 2025
Mitsubishi

Mitsubishi PEA-M180LAA Bruksanvisning

9 Januari 2025
Mitsubishi

Mitsubishi DXK06ZSA-WF1 Bruksanvisning

9 Januari 2025
Mitsubishi

Mitsubishi FDFL Bruksanvisning

1 Januari 2025
Mitsubishi

Mitsubishi MSZ-AXV4017S-R Bruksanvisning

14 December 2024
Mitsubishi

Mitsubishi SRK60ZSX-S Bruksanvisning

14 December 2024
Mitsubishi

Mitsubishi SRK50ZSX-S Bruksanvisning

14 December 2024
Mitsubishi

Mitsubishi SRK35ZSX-S Bruksanvisning

14 December 2024
Mitsubishi

Mitsubishi SRK25ZSX-S Bruksanvisning

14 December 2024

Luftkonditionering Manualer

Nyaste Luftkonditionering Manualer

Vox

Vox PMF09CH Bruksanvisning

18 Mars 2025
Vox

Vox PQF12CH Bruksanvisning

18 Mars 2025
Vox

Vox PQA12C Bruksanvisning

18 Mars 2025
Vox

Vox PMJ09C Bruksanvisning

18 Mars 2025
Toshiba

Toshiba RAC-WK1011ESCWU Bruksanvisning

18 Mars 2025
Toshiba

Toshiba RAC-WK0812ESCWRU1 Bruksanvisning

18 Mars 2025
Midea

Midea AG16Black-24NXD0-I Bruksanvisning

12 Mars 2025
Midea

Midea MSX-12NXD0 Bruksanvisning

12 Mars 2025
Midea

Midea AEP2-12NXD6-I Bruksanvisning

12 Mars 2025
Midea

Midea AEP2-09NXD6-I Bruksanvisning

12 Mars 2025