Mount-It! MI-10754 Bruksanvisning

Läs nedan 📖 manual på svenska för Mount-It! MI-10754 (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
English
Installation Instruction
1
UNPACKING INSTRUCTIONS
!Carefully open the carton, remove contents and lay out on cardboard or other
protective surface to avoid damage.
!Check package contents against the Supplied Parts List in the next page to assure
that all components were received undamaged. Do not use damaged or defective
parts.
!Carefully read all instructions before attempting installation.
IMPORTANT SAFETY INFORMATION
!Install and operate this device with care. Please read this instruction before
installation, and carefully follow all instructions contained herein. Use proper safety
equipment during installation.
!Please call a qualified installation contractor for help if you don't understand these
directions or have any doubts about the safety of the installation.
Do not use this product for any purpose or in any configuration not explicitly specified
in this instruction. We hereby disclaims any and all liability for injury or damage
arising from incorrect assembly, incorrect mounting, or incorrect use of this product.
2
CAUTION!
WARNING
!This monitor desktop mount must be securely
attached to the horizontal desk. If the mount is
not properly installed it may fall, resulting in
possible injury and/or damage.
Tools Required Phillips Screwdriver
Supplied Par ts List
(16)M4 Space-g
(16)M4x12
Thumb Bolt-d (16)M4x30 Bolt-e (32)M4 Washer-f
(4)M8x10 Bolt-h (2)M10x15 Bolt-i (1)Allen Key-j (2)Spare Plastic
Cover-k
(1) 48mm Tube
Support-a
(2) VESA Plate with
Arm Assembled-c
(1) Disconnected
C Clamp-b (1)Wrench-l
Step 1
Install the “C” Clamp According to the Desktop Thickness
3
Step 2 Install Arm to the Tube Support
a
b
i
j
c
h
The depth of Cclamp can be changed in
three positions. Choose the proper depth
ac co rd in g to the th ic kn es s of yo ur
desktop. Connect it by 2pcs M10x15
bolts(i), using the supplied Allen Key(j).
Install arm to the tube support,
please make sure the wire clip
in the downside. Fasten the
bolt by screw driver.

Produktspecifikationer

Varumärke: Mount-It!
Kategori: Inte kategoriserad
Modell: MI-10754

Behöver du hjälp?

Om du behöver hjälp med Mount-It! MI-10754 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Mount-It! Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer