Musical Fidelity A1 Bruksanvisning

Läs nedan 📖 manual på svenska för Musical Fidelity A1 (12 sidor) i kategorin mottagare. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/12
Instructions for use
Thank you for choosing the A1 integrated class A amplier. Used properly, it should give you many years of
outstanding musical reproduction.
The A1 is designed for high denition performance. It is strongly biased into Class A, for audible smoothness and
clarity.
If there are any questions about the audio system, please consult the dealer, who is there to help and advise.
HEAT DISSIPATION
The A1 is a traditional Class A amp. A rarity in this day and age. Because the A1 is strongly biased into Class A,
it dissipates power, as heat. Think of the heat that a 75 watt light bulb creates, and you've got an idea of the heat
produced by the A1.
CAUTION:
SOME PARTS OF THE PRODUCT MAY BECOME VERY HOT AND CAUSE
BURNS. SPECIAL CARE SHOULD BE TAKEN IN THE PRESENCE OF
CHILDREN AND VULNERABLE PERSONS.
THE WHOLE TOP OF THE A1 IS A HEAT SINK. TO ALLOW FULL HEAT
DISSIPATION, NOTHING SHOULD BE PLACED ON IT AT ANY TIME.
SURFACE TEMPERATURES OF ABOUT 55 DEGREES C ARE AVERAGE
FOR THE HEAT SINK. FRONT PANEL CONTROL ELEMENTS CAN FEEL
WARM TO THE TOUCH.
The exact temperature depends on the ambient temperature in your room, and on how much energy is dissipated
as sound.
It is also important to keep the top of the A1 free of dust and grime. Dust it regularly with a soft duster or soft brush
but do not use cleaning or polishing agents - they may harm the surface nish.
YOU MUST CONNECT THE A1 TO A PAIR OF LOUDSPEAKERS BEFORE YOU SWITCH IT ON.
P a g e 2
Section Page
Safety Information
Mains plug (UK only), modication warning
3
General advice
Installation precautions
4
Installation
Introduction, c , installation, power connections, aleaning udio
connections
5
Facilities and connections
Illustrations, main unit front & rear panels
6
Remote control handset
Operation and illustration
7
Operation
Starting
Fuses
Volume
Mute (Remote Control only)
Input Selection
NORMAL/DIRECT
8
Wiring
9
Problems?
Basic fault nding
10
Specications
Product specications
11
Manual history
Item disposal information
12
CONTENTS
P a g e 3
IMPORTANT! (U.K. only)
This unit is supplied in the U.K. with mains lead tted with a moulded 10 amp plug. If, for any reason, it is necessary
to remove the plug, please remove the fuse holder and dispose of the plug safely, out of reach of children.
It must not be plugged into a mains outlet.
The wires in the mains lead supplied with this appliance are coloured in accordance with the following code:
Green and yellow ............................ Earth
Blue .............................................. Neutral
Brown ................................................ Live
WARNING This appliance MUST be earthed
As the colours of the wires of the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in the plug, proceed as follows:
The wire which is coloured green- -yellow must be connected to the terminal in the plug which is marked and
with the letter E or coloured green or green- -yellow, or by the earth symbol: and
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or
coloured red.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured
black.
If connecting to a BS1363 plug, a 13 amp fuse must be used.
WARNING:
ANY MODIFICATIONS TO THIS PRODUCT NOT EXPRESSLY APPROVED
BY MUSICAL FIDELITY WHO IS THE PARTY RESPONSIBLE FOR
STANDARDS COMPLIANCE COULD VOID THE USER'S AUTHORITY TO
OPERATE THIS EQUIPMENT.
SAFETY INFORMATION

Produktspecifikationer

Varumärke: Musical Fidelity
Kategori: mottagare
Modell: A1

Behöver du hjälp?

Om du behöver hjälp med Musical Fidelity A1 ställ en fråga nedan och andra användare kommer att svara dig




mottagare Musical Fidelity Manualer

mottagare Manualer

Nyaste mottagare Manualer