Nec MultiSync FE771SB Bruksanvisning

Nec Övervaka MultiSync FE771SB

Läs nedan 📖 manual på svenska för Nec MultiSync FE771SB (36 sidor) i kategorin Övervaka. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/36
User’s Manual English
Uivatelská pøíruèka Èesky
Bedienungsanleitung Deutsch
Ïäçãßåò ×ñÞóçò ÅëëçíéêÜ
Manual del usuario Español
Manuel de l’utilisateur Français
Manuale utente Italiano
Gebruikershandleiding Nederlands
Podrêcznik u¿ytkownika Polski
Ðóêîâîäñòâî ïîëüçîâàòåëÿ Ðóññêèé
Kullanécé Kélavuzu Türkçe
MultiSync FE770 / MultiSync FE771SB
2
FCC Information
1. Use the attached specified cables with the MultiSync FE colour monitor so as not to interfere with radio and television reception.
(1) Please use the supplied power cord or equivalent to ensure FCC compliance.
(2) Shielded captive type signal cable.
Use of other cables and adapters may cause interference with radio and television reception.
2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult your dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user ’s authority to operate
the equipment.
If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions. The user
may find the following booklet, prepared by the Federal Communications Commission, helpful: ”How to Identify and Resolve
Radio-TV Interference Problems.“ This booklet is available from the U.S. Government Printing Office, Washington, D.C., 20402,
Stock No. 004-000-00345-4.
DECLARATION OF CONFORMITY
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
U.S. Responsible Party: NEC-Mitsubishi Electronics Display of America, Inc.
Address: 1250 N. Arlington Heights Road
Itasca, Illinois 60143
Tel.No.: (630) 467-3000
Type of Product: Computer Monitor
Equipment Classification: Class B Peripheral
Models: N1702
We hereby declare that the equipment specified above
conforms to the technical standards as specified in the FCC Rules.
IBM is registered trademark of International Business Machines Corporation. Apple and Macintosh are registered trademarks of
Apple Computer Inc. Microsoft and Windows are registered trademarks of the Microsoft Corporation.
ENERGYSTAR is a U.S. registered trademark. NEC is a registered trademark of NEC Corporation. All other trademarks or registered
trademarks are property of their respective owners.
3
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG
WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS
THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE
COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have
sufficient magnitude to cause electric shock. Therefore, it is dangerous to
make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation
and maintenance of this unit has been included. Therefore, it should be read
carefully in order to avoid any problems.
MultiSync FE monitor box* should contain the following:
•MultiSync FE Monitor with tilt/swivel base
•Power cord
•Captive Signal Cable
•User ’s manual
•CD ROM (includes complete User's Manual in PDF format)
* Remember to save your original box and packing material to
transport or ship the monitor.
Contents
To attach the MultiSync FE monitor to your system,
follow these instructions:
1. Turn off the power to your computer and MultiSync FE monitor.
2. If necessary, install the display card. For more information, refer
to the display card manual.
3. For PC: Connect the 15-pin mini D-SUB of the captive signal
cable to the connector for the display card in your system
(Figure A). Tighten all screws.
4. Connect one end of the power cord to the MultiSync monitor
and the other end to the power outlet (Figure A).
5. Turn on the monitor (Figure B) and the computer.
6. This completes the installation.
NOTE: If you need more information, please refer to complete
User's Manual in CD ROM.
Quick Start
Brightness/Contrast Controls
Brightness: Adjusts the overall image and background screen
brightness.
Contrast: Adjusts the image brightness in relation to the
background.
Degauss: Eliminates the buildup of stray magnetic fields which
alter the correct scan of the electron beams and affect the purity of
the screen colours, focus and convergence. When activated, your
screen image will jump and waver a bit as the screen is
demagnetized.
Caution: Please allow a minimum of 20 minutes to elapse
between uses of the Degauss Control.
Size and Position Controls
Left/Right: Moves the image horizontally (left or right).
Down/Up: Moves the image vertically (up or down).
Narrow/Wide: Decreases or increases the horizontal size of the
image.
Short/Tall: Decreases or increases the vertical size of the image.
Controls
OSM (On-Screen Manager) control buttons on the front
of the monitor function as follows:
EXIT
CONTROL
CONTROL
–/+
SELECT (FE770)
SELECT/
SBMODE (FE771SB)
RESET
Main Menu
Exits the OSM menu.
Moves the highlighted
area left/right to select
one of the sub-menus.
Has no function.
Enters sub-menu.
Resets all the controls
within the highlighted
menu to the factory
setting.
Sub-Menu
Exits to the OSM
controls main menu.
Moves the highlighted
area left/right to select
one of the controls.
Moves the bar in the –
or + direction to de-
crease or increase the
adjustment.
Has no function.
Resets the highlighted
control to the factory
setting.
NOTE: When RESET is pressed in the main and sub-menu, a warning
window will appear allowing you to cancel the reset function.
NOTE: In SB MODE (SuperBright Mode, FE771SB only), ON and OFF is
functional when the OSM is not displayed.
RISK OF ELECTRIK SHOCK • DO NOT OPEN
Figure A
Figure B
Power Button
/
Captive
Signal Cable CD ROM
Power Cord
15-pin mini D-SUB
Power
Cord
Power Outlet
User’s manual
English
Sales Office List

Produktspecifikationer

Varumärke: Nec
Kategori: Övervaka
Modell: MultiSync FE771SB

Behöver du hjälp?

Om du behöver hjälp med Nec MultiSync FE771SB ställ en fråga nedan och andra användare kommer att svara dig


Övervaka Nec Manualer

Nec

Nec SpectraView II Bruksanvisning

9 April 2025
Nec

Nec LED-FE015i3 Bruksanvisning

11 Februari 2025
Nec

Nec LED-FE015i2 Bruksanvisning

11 Februari 2025
Nec

Nec LED-FA025i2 Bruksanvisning

11 Februari 2025
Nec

Nec MultiSync E498 Bruksanvisning

7 Januari 2025
Nec

Nec MultiSync AS242W Bruksanvisning

1 Januari 2025
Nec

Nec MultiSync AS242W-BK Bruksanvisning

1 Januari 2025
Nec

Nec MultiSync L220W Bruksanvisning

1 Januari 2025
Nec

Nec E424 Bruksanvisning

14 Oktober 2024
Nec

Nec MD322C8-2 Bruksanvisning

11 Oktober 2024

Övervaka Manualer

Nyaste Övervaka Manualer

Acer

Acer EV227Q Bruksanvisning

9 April 2025
BenQ

BenQ DesignVue PD2730S Bruksanvisning

8 April 2025
Asus

Asus VA279QGS Bruksanvisning

8 April 2025
BenQ

BenQ PD3226G Bruksanvisning

7 April 2025
Philips

Philips 150S3F Bruksanvisning

5 April 2025
Samsung

Samsung LH65QETEPGC Bruksanvisning

5 April 2025
Philips

Philips 221V8LB Bruksanvisning

4 April 2025
Gigabyte

Gigabyte MO27U2 Bruksanvisning

4 April 2025
Philips

Philips Momentum 242M7 Bruksanvisning

2 April 2025
Samsung

Samsung F24T650FYR Bruksanvisning

2 April 2025