Nec PlasmaSync 42XM1 Bruksanvisning

Nec Övervaka PlasmaSync 42XM1

Läs nedan 📖 manual på svenska för Nec PlasmaSync 42XM1 (62 sidor) i kategorin Övervaka. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/62

PlasmaSync Plasma Monitor

User's Manual

Bedienungshandbuch

Manuel de l'utilisateur

Manual del Usuario

Manuale d'uso

Bruksanvisning

PlasmaSync 42MP4 (42XGA)

PX-42XM1G

PlasmaSync 42MP3 (42Wide VGA)

PX-42VM3G

User’s Manual

Bedienungshandbuch

Manuel de l’utilisateur

Manual del Usuario

Manuale d’uso

Bruksanvisning

Precautions

Please read this manual carefully before using your plasma

monitor and keep the manual handy for future reference.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER. NO

USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

This symbol warns the user that uninsulated

voltage within the unit may have sufficient

magnitude to cause electric shock.

Therefore, it is dangerous to make any kind

of contact with any part inside of this unit.

This symbol alerts the user that important

literature concerning the operation and

maintenance of this unit has been included.

Therefore, it should be read carefully in

order to avoid any problems.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE

THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE

THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD

RECEPTACLE OR OTHER OUTLETS, UNLESS THE

PRONGS CAN BE FULLY INSERTED. REFRAIN FROM

OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE

COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

Warning

This is a Class A product. In a domestic environment, this

product may cause radio interference in which case the user

may be required to take adequate measures.

Important Information

Warnings and Safety Precaution

This plasma monitor is designed and

manufactured to provide long, trouble-free service.

No maintenance other than cleaning is required. Use

a soft dry cloth to clean the panel. Never use

solvents such as alcohol or thinner to clean the panel

surface.

The plasma display panel consists of fine picture

elements (cells) with more than 99.99 percent active

cells. There may be some cells that do not produce

light or remain lit.

For operating safety and to avoid damage to the unit,

read carefully and observe the following instructions.

To avoid shock and fire hazards:

1. Provide adequate space for ventilation to avoid internal

heat build-up. Do not cover rear vents or install the unit

in a closed cabinet or shelves.

The unit is equipped with cooling fans (42XGA only).

If you install the unit in an enclosure, make sure there

is adequate space at the top of the unit to allow hot air

to rise and escape. If the monitor becomes too hot, the

overheat protector will be activated and the monitor will

be turned off. If this happens, turn off the power to the

monitor and unplug the power cord. If the room where

the monitor is installed is particularly hot, move the

monitor to a cooler location, and wait for 60 minutes to

cool the monitor. If the problem persists, contact your

dealer for service.

2. Do not use this unit polarized plug with extension cords

or outlets unless the prongs can be completely inserted.

3. Do not expose the unit to water or moisture.

4. Avoid damage to the power cord, and do not attempt to

modify the power cord.

5. Unplug the power cord during electrical storms or if

the unit will not be used over a long period.

6. Do not open the cabinet which has potentially dangerous

high voltage components inside. If the unit is damaged in

this way the warranty will be void. Moreover, there is a

serious risk of electric shock.

7. Do not attempt to service or repair the unit. This is not

liable for any bodily harm or damage caused if unqualified

persons attempt service or open the back cover. Refer

all service to authorized Service Centers.

Produktspecifikationer

Varumärke:	Nec
Kategori:	Övervaka
Modell:	PlasmaSync 42XM1
Färg på produkten:	Zwart
Vikt:	13000 g
Bredd:	660 mm
Djup:	680 mm
Höjd:	220 mm
Förpackningens vikt:	16000 g
Snäll:	Lade
Material:	Roestvrijstaal
Antal per paket:	1 stuk(s)
Varumärkeskompatibilitet:	Smeg