Nec PlasmaSync 50VP2 Bruksanvisning

Nec Övervaka PlasmaSync 50VP2

Läs nedan 📖 manual på svenska för Nec PlasmaSync 50VP2 (66 sidor) i kategorin Övervaka. Denna guide var användbar för 14 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/66

User’s Manual

Bedienungshandbuch

Manuel de l'utilisateur

E-2



†

PLASMA MONITOR

Important Information

Warnings and Safety Precaution

The NEC plasma monitor is designed and manufactured to pro-

vide long, trouble-free service. No maintenance other than clean-

ing is required. Use a soft dry cloth to clean the panel. Never use

solvents such as alcohol or thinner to clean the panel surface.

The plasma display panel consists of ne picture elements (cells).

Although NEC produces the plasma display panels with more than

99.99 percent active cells, there may be some cells that do not

produce light or remain lit.

For operating safety and to avoid damage to the unit, read care-

fully and observe the following instructions.

To avoid shock and re hazards:

1. Provide adequate space for ventilation to avoid internal heat

build-up. Do not cover rear vents or install in a closed cabinet

or shelves.

The unit is equipped with cooling fans. If you install the unit in

an enclosure, be sure there is adequate space at the top of the

unit to allow hot air to rise and escape.

If the monitor becomes too hot, the overheat protector will be

activated and the monitor will be turned o. If this happens,

turn o the power to the monitor and unplug the power cord. If

the room where the monitor is installed is particularly hot, move

the monitor to a cooler location, and wait for the monitor to

cool for 60 minutes. If the problem persists, contact your NEC

dealer for service.

2. Do not use the power cord polarized plug with extension cords

or outlets unless the prongs can be completely inserted.

3. Do not expose unit to water or moisture.

4. Avoid damage to the power cord, and do not attempt to modify

the power cord.

5. Unplug unit during electrical storms or if unit will not be used

over a long period.

6. Do not open the cabinet which has potentially dangerous high

voltage components inside. If the unit is damaged in this way

the warranty will be void. Moreover, there is a serious risk of

electric shock.

7. Do not attempt to service or repair the unit. NEC is not liable

for any bodily harm or damage caused if unqualied persons

attempt service or open the back cover. Refer all service to

authorized NEC Service Centers.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER. NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALI-

FIED SERVICE PERSONNEL.

This symbol warns the user that uninsulated volt-

age within the unit may have sucient magnitude

to cause electric shock. Therefore, it is dangerous

to make any kind of contact with any part inside of

this unit.

This symbol alerts the user that important litera-

ture concerning the operation and maintenance

of this unit has been included. Therefore, it should

be read carefully in order to avoid any problems.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EX-

POSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT

USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION

CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE

PRONGS CAN BE FULLY INSERTED. REFRAIN FROM

OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE

COMPONENTS INSIDE. REFER SERVICING TO QUALI-

FIED SERVICE PERSONNEL.

WARNING

This is a Class A product. In a domestic environment this product

may cause radio interference in which case the user may be re-

quired to take adequate measures.

Precautions

Please read this manual carefully before using your NEC plasma

monitor and keep the manual handy for future reference.

CAUTION

PLASMA MONITOR



†E-3

NOTE:

When you connect a computer to this monitor, attach the sup-

plied ferrite cores. If you do not do this, this monitor will not

conform to mandatory FCC standards.

Attaching the ferrite cores.

Set the ferrite cores on both ends of the DVI cable (not sup-

plied), and at one end of the power cable (supplied).

Close the lid tightly until the clamps click.

Set side

(Plasma Monitor side)

DVI cable (not supplied)

core (small) core (small)

Connector

Power cable (supplied) core (large)

band band

band

Recommendations to avoid or minimize phosphor

burn-in

Like all phosphor-based display devices and all other gas plasma

displays, Plasma monitors can be susceptible to phosphor burn

under certain circumstances. Certain operating conditions, such

as the continuous display of a static image over a prolonged pe-

riod of time, can result in phosphor burn if proper precautions are

not taken. To protect your investment in this NEC plasma moni-

tor, please adhere to the following guidelines and recommenda-

tions for minimizing the occurrence of image burn:

* Always enable and use your computer's screen saver function

during use with a computer input source.

* Display a moving image whenever possible.

* Always power down the monitor when you are nished using it.

NEC has built-in several operating modes in your PlasmaSync PD

Series monitor to help you reduce the likelihood of phosphor burn.

These are called the AccuShield Phosphor Protection System. If

the Plasmasync monitor is in long-term use or continuous opera-

tion, use the functions available in AccuShield to reduce the likeli-

hood of perceptible phosphor burn or to diminish its perceptible

eects if it occurs. See pages E-34, 42 and 43 for instructions on

how to use the Orbiter, Low Brightness and Inverse RGB modes

of AccuShield.

* Lower the Brightness and Contrast levels as much as possible

without impairing image readability.

* Display an image with many colors and color gradations (ie.

photographic or photo-realistic images).

* Create image content with minimal contrast between light and

dark areas. For example white characters on black backgrounds.

Use complementary or pastel colors whenever possible.

* Avoid displaying images with few colors and distinct, sharply

dened borders between colors.

Contact NEC Technologies at 1-800-836-0655 for other recom-

mended procedures that will best suit your particular application

needs.

To avoid damage and prolong operating life:

1. Use only with 120V 50/60Hz AC power supply. Continued op-

eration at line voltages greater than 120 Volts AC will shorten

the life of the unit, and might even cause a re hazard.

2. Handle the unit carefully when installing it and do not drop.

3. Set the unit away from heat, excessive dust, and direct sun-

light.

4. Protect the inside of the unit from liquids and small metal ob-

jects. In case of accident, unplug the unit and have it serviced

by an authorized NEC Service Center.

5. Do not hit or scratch the panel surface as this causes aws on

the surface of the screen.

6. For correct installation and mounting it is strongly recom-

mended to use a trained, authorized NEC dealer.

7. As is the case with any phosphor-based display (like a CRT

monitor, for example) light output will gradually decrease over

the life of a Plasma Display Panel.

Important Information

Produktspecifikationer

Varumärke:	Nec
Kategori:	Övervaka
Modell:	PlasmaSync 50VP2
Färg på produkten:	Zwart
Vikt:	660 g
Bredd:	195 mm
Djup:	130 mm
Höjd:	35 mm
Kompatibilitet:	LFH0720, LFH0725, LFH0730, LFH0735
Harmoniserad systemkod (HS):	84716070