Nec XL-6500 Bruksanvisning

Nec Beamer XL-6500

Läs nedan 📖 manual på svenska för Nec XL-6500 (82 sidor) i kategorin Beamer. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/82

MultiSync Hivid 6500 Projector

Large Screen MultiSync Projection System

User’s Manual

Model number: XL-6500/XL-6500G

CAUTION: To turn off main power, be sure to remove the

plug from power outlet. The power outlet socket should be

installed as near to the equipment as possible, and should

be easily accessible.

3. GSGV Acoustic Noise Information Ordinance:

The sound pressure level is less than 70 dB(A) according to

ISO 3744 or ISO 7779.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE

THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS

UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD

RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS

CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE

CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PER-

SONNEL.

AVERTISSEMENT

POUR EVITER UN FEU OU UN RISQUE D’ELECTROCUTION NE

PAS EXPOSER CET ENSEMBLE A LA PLUIE OU A L’HUMIDITE; DE

MEME, NE PAS BRANCHER LA PRISE POLAIRE AVEC UNE

RALLONGE A MOINS QUE LES DENTS DE LA PREMIERE NE S’Y

INSERENT PLEINEMENT.

EVITER D’OUVRIR LE COFFRET CAR IL Y A, A L’INTERIEUR, DES

COMPOSANTS SOUMIS A UNE HAUTE-TENSION; POUR LES

REPARATIONS, S’ADRESSER A UN PERSONNEL QUALIFIE.

WARNING

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in

a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the installation manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his

own expense.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE D’ELECTROCUTION

NE PAS OUVRIR

ATTENTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

OPEN COVER. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSON-

NEL.

This symbol warns the user that uninsulated voltage

within the unit may have sufficient magnitude to cause

electric shock. Therefore, it is dangerous to make any

kind of contact with any part inside of this unit.

This symbol alerts the user that important literature

concerning the operation and maintenance of this unit

has been included. Therefore, it should be read carefully

in order to avoid any problems.

DOC compliance Notice

This Class A digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

ATTENTION: POUR EVITER LES RISQUES D’ELECTROCUTION, NE

PAS OUVRIR LE COUVERCLE. AUCUN DES ELEMENTS

INTERNES NE DOIT ETRE REPARE PAR L’UTILISATEUR.

NE CONFIER L’ENTRETIEN QU’A UN PERSONNEL

QUALIFIE.

L’éclair fléché dans un triangle équilatéral est destiné à

avertir l’utilisateur de la présence, dans l’appareil, d’une

zone non-isolée soumise à une haute-tension dont

l’intensité est suffisante pour constituer un risque

d’electrocution.

Le point d’exclamation dans un triangle équilatéral est

destiné à attirer l’attention de l’utilisateur sur la présence

d’informations de fonctionnement et d’entretien

importantes dans la brochure dccompagnant l’appareil.

DOC avis de conformation

Cet appareil numérique de la classe A respecte toutes les exigences

du Réglement sur le Matériel D’interférence du Canada.

Precautions

Please read this manual carefully before using your NEC

MultiSync Hivid 6500 Projector and keep the manual handy

for future reference.

INTRODUCTION

Important Safeguards

These safety instructions are to ensure the long life of your projector and to prevent fire and shock. Please read them carefully and heed

all warnings.

Installation

1. Place the projector on a at, level surface and in a dry area free from dust and moisture.

2. Do not place the projector in direct sunlight, near heaters or heat radiating appliances.

3. Exposure to direct sunlight, smoke or steam could harm internal components.

4. Handle your projector carefully. Dropping or jarring your projector could damage internal components.

5. Do not place heavy objects on top of the projector.

6. If installing the projector on the ceiling:

a. The ceiling must be strong enough to support the projector and the installation must be performed in accordance with any local

building codes.

b. Qualied NEC authorized dealer personnel must install the projector.

Power Supply

1. The projector is designed to operate on a power supply of 2.4KW(MAX) AC200-240V 50/60Hz. Ensure that your power supply fits

this requirement before attempting to use your projector.

2. Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or re.

3. If the projector will not be used for an extended period of time, disconnect the plug from the power outlet.

4. Placing the power cord and the RGB cable closely to each other can cause beat noise. If this happens, keep the two separated so that

beat noise is not generated.

Cleaning

1. Unplug the projector before cleaning.

2. Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use strong detergents or solvents such

as alcohol or thinner.

3. Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens.

Fire and Shock Precautions

1. Ensure that there is sufficient ventilation and that vents are unobstructed to prevent potentially dangerous concentrations of ozone

and the build-up of heat inside your projector. Allow at least 3 inches (10cm) of space between your projector and a wall.

2. Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not attempt to retrieve any objects

that might fall into your projector. Do not insert any metal objects such as a wire or screwdriver into your projector. If something

should fall into your projector, disconnect it immediately and have the object removed by a qualied NEC service person.

3. Do not place any liquids on top of your projector.

CAUTION: High Pressure Lamp May Explode if Improperly Handled. Refer Servicing to Qualified Service Personnel.

Lamp Caution: Please read before operation

Due to the lamp being sealed in a pressurized environment, there is a small risk of explosion, if not operated correctly. There is

minimal risk involved, if the unit is proper working order, but if damaged or operated beyond the recommended 1500 hours, the

risk of explosion increases.

Please note that there is a warning system built in, that displays the following message when you reach 1500 hours of operation”

Lamp Running Time is Over 1500 Hours!!” When you see this message please contact your NEC Dealer for a replacement.

If the lamp does explode, smoke will be discharged from the vents located on the side of the unit. This smoke is comprised of

glass in particulate form and Xenon gas, and will not cause harm if kept out of your eyes. If your eyes have been exposed to this

gas, please flush your eyes out with water immediately and seek immediate medical attention. Do not rub your eyes! This could

cause serious injury.

WARNING:Do not look into the lens while the projector is on. Serious damage to your eyes could result.

Produktspecifikationer

Varumärke:	Nec
Kategori:	Beamer
Modell:	XL-6500
Vikt:	1220 g
Bredd:	71 mm
Djup:	244 mm
Höjd:	37.5 mm
Internationell säkerhetskod (IP):	IP20
Hållbarhetscertifikat:	RoHS
Uteffekt:	200 W
Utström:	0.7 A
Spännande:	286 V
AC-ingångsspänning:	100 - 305 V