Netgear ANT2405 Bruksanvisning

Läs nedan 📖 manual på svenska för Netgear ANT2405 (7 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 18 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
Installation Guide
5 dBi Omni-directional Antenna
ANT24O5
Placement and Other Important Considerations
In order to maximize coverage, antennas must be placed in a good spot. A lot of improvement
can be achieved by optimizing the line of sight between antennas. Try to minimize the
partitions and partial obstructions if possible. For instance, place the antenna on a wall above
the cubicles (cubicles generally include a metal foil). Ideal placement is against a wall, 2m high,
or on the ceiling facing the area to cover.
The longer the antenna cable, the higher the attenuation, or signal loss. This will decrease the
range and performance. The best performance is achieved with a short cable between the
antenna and the wireless device. The shortest FCC approved antenna cable is the NETGEAR
1.5 M (ACC-10314-01) cable. For optimal performance, use a low-loss NETGEAR antenna
cable up to 10 meters long.
If the wireless access point, router or gateway is in a IT room, place the antenna outside of the
room close to the ceiling against a wall. Use a NETGEAR antenna cable of up to 10 meters in
length to connect the antenna to the wireless access point.
2
Approximate
coverage area
Cubicles
1.5m high
ANT24O5
Figure 1: Optimal antenna placement on the ceiling

Produktspecifikationer

Varumärke: Netgear
Kategori: Inte kategoriserad
Modell: ANT2405

Behöver du hjälp?

Om du behöver hjälp med Netgear ANT2405 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Netgear Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer