Newstar FPMA-D100 Bruksanvisning
Läs nedan 📖 manual på svenska för Newstar FPMA-D100 (6 sidor) i kategorin Väggfäste. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/6
Before starting Assembly
Please spend a short time reading this
manual then follow the simple step by step
guide to assembly. Some panels are viewed
differently from the exploded drawing below,
this is for extra clarity.
Do not discard any of the packaging until you
have checked all the parts and the pack of
fittings. If you are missing any of the parts,
contact store where you purchased.
Tools Check-List
Allen Key
Caution:
Qty
09
Code
Fitting Check-List
Code
Parts Check-List
Description
Component
Bolt
Screw
Base Cover
Clamp Pad
Qty
08
4
8
05
Arm
06
07
04
Clamp
Connector Plate
02
03
Rubber Cap
Cable Cover
01 1
1
1
1
1pair
1
1
03 01
06-L
02
07
04
05
06-R
Regular cleaning with a clean dry cloth is usually sufficient, but for stubborn
marks, wipe over gently with a clean damp cloth. Never use strong detergents or
abrasive cleaners as these may damage the surface finish of your furniture. There
are many small components used in the construction of this unit. These loose
items should be kept away from young children while assembling your unit.
LCD Monitor Arm
NewStar user's Manual
LCD Monitor Arm FPMA-D100
www.NewStar.nl
Phone: + 31 (0) 23 547 88 88
Clamping system is well assembled in standard packing.
However, user could disassemble this unit and re-assemble for
thicker desk fitting by adjusting cranking bar & clamp position.
At least two screws should be used for clamping system.
Remove pad cover and adhere to bottom of larger L bracket.
Suggested thickness of desk is 15mm-100mm, over 30mm is
Check your LCD panel first to find which VESA
standard interface it supports before
assembling.
75 mm x 75 mm VESA standard interface
100 mm x 100 mm VESA standard interface
Secure the arm to the
Secure 100 x 100 mm plate 04 to the arm with
screws 08,then secure the arm to the rear of the
rear of the LCD panel with
screws 08
The loading weight of universal joint is initially
fixed below 6 kgs. Consult the store where you
purchased about adjusting weight over 6 kgs.
Press two sides of 06-L lightly and remove 06-R ,
06-L outwards. Let the cables run through the
bottom of the arm and then press cable cover 03
to the arm to fix cables steady. Assemble 06-L
and 06-R back to arm after finish cable
managing.
Remove the rubber cap 05, use the Allen key provided to
adjust the weight capacity from 3 to 8 kgs. The weight is
originally set up at 3 kgs.
Be sure to adjust the weight in a vertical position as illustrated.
Twist the Allen key in a clockwise direction for less weight;
counterclockwise direction, more weight. Make sure of the
LCD panel weight prior to adjusting the weight according to the
instruction.
Panel weight Counterclockwise direction
4 kgs 4 turns
5-6 kgs 5-7 turns
7-8 kgs 8-10 turns
ADJUSTMENT:
09 x4
02
01
07
08 x8
04
03
06-R
06-L
05
max
min
Assembly Guide
Produktspecifikationer
| Varumärke: | Newstar |
| Kategori: | Väggfäste |
| Modell: | FPMA-D100 |
Behöver du hjälp?
Om du behöver hjälp med Newstar FPMA-D100 ställ en fråga nedan och andra användare kommer att svara dig
Väggfäste Newstar Manualer
23 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
22 September 2024
20 September 2024
19 September 2024
2 September 2024
1 September 2024
Väggfäste Manualer
- Väggfäste Vivanco
- Väggfäste Manhattan
- Väggfäste Hama
- Väggfäste Vogels
- Väggfäste Handson
- Väggfäste B-tech
- Väggfäste Speaka
- Väggfäste VCM
Nyaste Väggfäste Manualer
14 September 2024
14 September 2024
14 September 2024
14 September 2024
14 September 2024
14 September 2024
14 September 2024
13 September 2024
13 September 2024
11 September 2024