Nissan Versa (2007) Bruksanvisning

Nissan Bil Versa (2007)

Läs nedan 📖 manual på svenska för Nissan Versa (2007) (49 sidor) i kategorin Bil. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/49

MT-1

MANUAL TRANSAXLE

C TRANSMISSION/TRANSAXLE

CONTENTS

SECTION MT A

Revision: June 2006 2007 Versa

PRECAUTIONS .......................................................... 2

Precautions for Supplemental Restraint System

(SRS) “AIR BAG” and “SEAT BELT PRE-TEN-

SIONER” .................................................................. 2

Precautions .............................................................. 2

PREPARATION ........................................................... 3

Special Service Tools ............................................... 3

Commercial Service Tools ........................................ 4

NOISE, VIBRATION AND HARSHNESS (NVH)

TROUBLESHOOTING ................................................ 6

NVH Troubleshooting Chart ..................................... 6

DESCRIPTION ............................................................ 7

Cross-Sectional View ............................................... 7

TRIPLE-CONE SYNCHRONIZER ........................ 8

REVERSE GEAR NOISE PREVENTION FUNC-

TION (SYNCHRONIZING METHOD) ................... 8

M/T OIL ....................................................................... 9

Changing M/T Oil ..................................................... 9

DRAINING ............................................................. 9

FILLING ................................................................. 9

Checking M/T Oil ...................................................... 9

OIL LEAKAGE AND OIL LEVEL ........................... 9

SIDE OIL SEAL ........................................................ 10

Removal and Installation ........................................ 10

REMOVAL ........................................................... 10

INSTALLATION ................................................... 10

POSITION SWITCH ...................................................11

Checking .................................................................11

BACK-UP LAMP SWITCH ...................................11

PARK/NEUTRAL POSITION SWITCH ................11

CONTROL LINKAGE ............................................... 12

Components of Control Device and Cable ............. 12

Removal and Installation ........................................ 12

REMOVAL ........................................................... 12

INSTALLATION ................................................... 13

AIR BREATHER HOSE ............................................ 14

Removal and Installation ........................................ 14

COMPONENTS ................................................... 14

REMOVAL ........................................................... 14

INSTALLATION ................................................... 14

TRANSAXLE ASSEMBLY ........................................ 15

Removal and Installation ........................................ 15

COMPONENTS ................................................... 15

REMOVAL ........................................................... 15

INSTALLATION ................................................... 15

Disassembly and Assembly .................................... 17

COMPONENTS ................................................... 17

DISASSEMBLY ................................................... 23

ASSEMBLY ......................................................... 28

INPUT SHAFT AND GEARS .................................... 34

Disassembly and Assembly .................................... 34

GENERAL PRECAUTIONS ................................ 34

DISASSEMBLY ................................................... 34

INSPECTION AFTER DISASSEMBLY ................ 36

ASSEMBLY ......................................................... 37

MAINSHAFT AND GEARS ....................................... 38

Disassembly and Assembly .................................... 38

GENERAL PRECAUTIONS ................................ 38

DISASSEMBLY ................................................... 38

INSPECTION AFTER DISASSEMBLY ................ 39

ASSEMBLY ......................................................... 40

REVERSE IDLER SHAFT AND GEARS .................. 43

Disassembly and Assembly .................................... 43

DISASSEMBLY ................................................... 43

ASSEMBLY ......................................................... 44

FINAL DRIVE ............................................................ 45

Disassembly and Assembly .................................... 45

DISASSEMBLY ................................................... 45

INSPECTION AFTER DISASSEMBLY ................ 46

ASSEMBLY ......................................................... 46

SHIFT CONTROL ..................................................... 48

Inspection ............................................................... 48

SERVICE DATA AND SPECIFICATIONS (SDS) ...... 49

General Specifications ............................................ 49

MT-2

PRECAUTIONS

Revision: June 2006 2007 Versa

PRECAUTIONS PFP:00001

Precautions for Supplemental Restraint System (SRS) “AIR BAG” and “SEAT

BELT PRE-TENSIONER” ECS00GLL

The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along

with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain

types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS

system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front

air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.

Information necessary to service the system safely is included in the SRS and SB section of this Service Man-

ual.

WARNING:

●To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death

in the event of a collision which would result in air bag inflation, all maintenance must be per-

formed by an authorized NISSAN/INFINITI dealer.

●Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-

sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air

Bag Module, see the SRS section.

●Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this

Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or

harness connectors.

Precautions UCS005LD

●If transaxle assembly is removed from the vehicle, always replace CSC (Concentric Slave Cylinder).

Installed CSC returns to the original position when removing transaxle assembly. Dust on clutch disc slid-

ing parts may damage CSC seal, and may cause clutch fluid leakage.

●Do not reuse transaxle oil.

●Drain, fill and check transaxle oil with the vehicle on level surface.

●During removal or installation, keep inside of transaxle clear of dust or dirt.

●Check for the correct installation orientation prior to removal or disassembly. If matching marks are

required, be certain they do not interfere with the function of the parts they are applied to.

●In principle, tighten bolts or nuts gradually in several steps working diagonally from inside to outside. If

tightening sequence is specified, follow it.

●Be careful not to damage the sliding surfaces and mating surfaces of parts.

PREPARATION

MT-3

Revision: June 2006 2007 Versa

PREPARATION PFP:00002

Special Service Tools UC S00 655

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

Tool number

(Kent-Moore No.)

Tool name

Description

KV381054S0

(J-34286)

Puller

Removing mainshaft front bearing outer race

KV38100200

( — )

Drift

●Installing mainshaft front bearing outer race

●Installing mainshaft rear bearing outer race

●Installing differential side bearing outer race

(clutch housing side)

a: 65 mm (2.56 in) dia.

b: 49 mm (1.93 in) dia.

ST33220000

( — )

Drift

Installing input shaft oil seal

a: 37 mm (1.46 in) dia.

b: 31 mm (1.22 in) dia.

c: 22 mm (0.87 in) dia.

ST33400001

(J-26082)

Drift

Installing differential side bearing outer race

(transaxle case side)

a: 60 mm (2.36 in) dia.

b: 47 mm (1.85 in) dia.

KV38100300

(J-25523)

Drift

Installing differential side oil seal

a: 54 mm (2.13 in) dia.

b: 46 mm (1.81 in) dia.

c: 32 mm (1.26 in) dia.

ST36720030

( — )

Drift

●Installing input shaft rear bearing

●Installing mainshaft front bearing inner race

a: 70 mm (2.76 in) dia.

b: 40 mm (1.57 in) dia.

c: 29 mm (1.14 in) dia.

ZZA0601D

ZZA1143D

ZZA1046D

ZZA0814D

ZZA1046D

ZZA0978D

Produktspecifikationer

Varumärke:	Nissan
Kategori:	Bil
Modell:	Versa (2007)
Bredd:	245 mm
Djup:	203 mm
Grafikadapter:	GMA 3000
Typ av strömkälla:	ATX
Antal USB 2.0-portar:	4
VGA (D-Sub) port(ar):	1
Antal Ethernet LAN (RJ-45)-portar:	1
Inkluderad programvara:	Drivers\nASUS PC Probe II\nASUS Update \nAnti Virus (OEM)
Processoruttag:	LGA 775 (Socket T)
Processorfabrikant:	Intel
Maximalt internminne:	4 GB
Ljudutgångskanaler:	5.1 kanalen
Nätverksfunktioner:	Gigabit Ethernet, WLAN
ETC:	Nee
Ljudchip:	Realtek ALC883
PS/2-port(ar):	2
Seriell port(ar):	1
Expansionsplatser:	1x PCI-E x16\n1x PCI-E x1\n2x PCI
Maximalt minne grafikadapter:	256 MB
Särskilda egenskaper:	ASUS WiFi-AP Solo\nASUS CrashFree BIOS 2\nASUS EZ Flash\nASUS Q-fan\nASUS MyLogo 2
Icke-ECC:	Ja
Underhållsegenskaper:	WfM 2.0, DMI, WOL by PME, WOR by PME, PXE
Parallellport(ar):	1
Max. antal SMP-processorer:	1
Moderkorts formfaktor:	micro ATX
Antal minnesplatser:	2
BIOS-minnesstorlek:	32 Mbit
Anslutning för CPU-kylare:	Ja
Anslutningar för husfläktar:	1
ATX-strömkontakt (24-stift):	Ja
Antal SATA-anslutningar:	4
USB 2.0-anslutningar:	1
Anslutning för ljudpanel på framsidan:	Ja
Anslutning för diskettstation:	Ja
Chassiintrångsanslutning:	Ja
S/PDIF uitgang:	Ja
CD/AUX-ljudspel:	Ja
Antal parallella ATA-anslutningar:	1
WiFi-AP antennuttag:	1
Typ av anslutning (2:a) styrenhet:	UltraDMA 100/66/33
Typ av styrenhetsanslutning:	Serial ATA I/II
Anslutningar för EATX nätaggregat:	1
Överklockningsfunktioner:	SFS\nASUS C.P.R.