Numark CDMix Bluetooth Bruksanvisning

Numark Mixerkonsol CDMix Bluetooth

Läs nedan 📖 manual på svenska för Numark CDMix Bluetooth (36 sidor) i kategorin Mixerkonsol. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/36
1
USER GUIDE
ENGLISH ( 2 – 7 )
GUÍA DEL USUARIO
ESPAÑOL ( 8 – 14 )
GUIDE D’UTILISATION
FRANÇAIS ( 15 – 21 )
GUIDA PER L'USO
ITALIANO ( 22 – 27 )
BENUTZERHANDBUCH
DEUTSCH ( 28 – 34 )
2
BOX CONTENTS
CDMix Bluetooth®
Power cable
Stereo RCA cable
User Guide
Safety & Warranty Information Booklet
REGISTRATION
Please go to www.numark.com to register your CDMIX Bluetooth. Registering your product ensures that we can
keep you up-to-date with any new product developments and provide you with world-class technical support, should
you run into any problems.
SETUP
1. Make sure all items listed in the BOX CONTENTS section are included in the box.
2. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
3. Study the connection diagram in this guide.
4. Place CDMix Bluetooth in an appropriate position for operation.
5. Make sure all devices are turned off and all faders and gain knobs are set to "zero."
6. Connect all stereo input sources as indicated in the diagram.
7. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.
8. Plug all devices into AC power.
9. Switch everything on in the following order:
Audio input sources (i.e. turntables, CD players, etc.)
Mixer
Last, any amplifiers or output devices
10. When turning off, always reverse this operation by turning off:
Amplifiers
Mixer
Last, any input devices
CONNECTION DIAGRAM
POWER
MAIN AMP
HOUSE
MONITORS
TURNTABLE
CD PLAYER
MICROPHONE
For best audio quality,
avoid using this device
in a high RF-radiated
environment.
TABLET
Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and any use by Numark is under license.
Other trademarks and trade names are those of their respective owners.
BOOTH
MONITORS
ZONE AMP
HEADPHONES
3
TOP PANEL FEATURES
1. EJECT Press this button to open or close the CD disc tray.
2. JOG WHEEL The jog wheel functions differently depending on its current mode.
a) If a track is not playing, the JOG WHEEL will search slowly through a track's frames. To set a
new cue point, rotate the JOG WHEEL then begin playback when you have determined the
proper position. Press CUE to return to that cue point.
b) If a track is playing, the JOG WHEEL will temporarily bend the pitch of the track. Rotating the
JOG WHEEL clockwise temporarily speeds it up while rotating it counterclockwise slows it down.
This is useful for beat-matching.
c) When the SEARCH button has been activated, rotating the JOG WHEEL will move rapidly
through the track.
d) When the SCRATCH button has been activated, rotating the JOG WHEEL will "scratch" over the
audio of the track, like a needle on a record.
Note: The JOG WHEEL is not touch-sensitive.
3. SCRATCH – Activates or deactivates Scratch Mode. While activated, rotating the JOG WHEEL creates
a 'scratch' effect. The LED indicator will be blue when Scratch Mode is active.
(Note: This feature is not optimal for searching through long audio passages. For longer searches,
activate the SEARCH function.)
4. SEARCH Activates or deactivates Search Mode. Press
this button to use the JOG WHEEL to rapidly scan through
the track. The LED indicator will be red when Search
Mode is active.
5. CUE During playback, press CUE to return to the cue point and pause the track. Hold down CUE to
start playback from the cue point, and release CUE to return to that point and pause the track. If the
track is paused, use the JOG WHEEL to locate a new cue point.
6. PLAY / PAUSE Plays or pauses the track.
Note: When paused, pressing PLAY will only set a new cue point if the JOG WHEEL has been moved.
7. TRACK SELECT Selects the track to be played. Press and hold either of the TRACK SELECT
buttons to rapidly change tracks.
8. FOLDER Press this button to enter Folder Mode. The folder name will be displayed on the LCD.
Here, you can press and hold the FOLDER button and use the TRACK SELECT buttons to select a
folder. Release FOLDER to enter the selected folder. (When inside a folder, use the TRACK SELECT
buttons to select the track.) Press FOLDER again to exit Folder Mode.
9. +10 – Press this button to skip through the CD track listing 10 tracks at a time.
10. LOOP IN – Sets a new cue point or the start point of a loop (a "Loop In" point) during playback.
11. LOOP OUT Sets the end point of a loop (a "Loop Out" point) and starts playing the loop. While
playing a loop, press LOOP OUT to release it from the loop and continue normal playback.
12. RELOOP – Plays the track immediately from the beginning of a loop (and reactivates the loop).
13. PITCH – Activates or deactivates the PITCH FADER. Press to cycle through the available pitch ranges
(±4%, 8%, and 16%). The current range will be indicated on the LCD and by pitch percentage LED
indicators.
To create a cue point, move the JOG WHEEL
when the track is paused. The cue point will
be set once you start playback from that point
(by pressing PLAY / PAUSE).
28
1
2
1
2
33
44
5 56 6
7 7
7 7
8
8
9
9
10 10
11 11
12 12
13
14
15 15
16
16
18
2019 19 20 171721 21
22 22
23 23 23
24 24 24 2425
25
25 25
26 26 26
27
27 27 27
29 29 29
30
31
32
33
38
39
40
41
34
28
37
28
35
36
14
13

Produktspecifikationer

Varumärke: Numark
Kategori: Mixerkonsol
Modell: CDMix Bluetooth

Behöver du hjälp?

Om du behöver hjälp med Numark CDMix Bluetooth ställ en fråga nedan och andra användare kommer att svara dig




Mixerkonsol Numark Manualer

Mixerkonsol Manualer

Nyaste Mixerkonsol Manualer