Omega Seamaster Diver Bruksanvisning

Omega Titta Seamaster Diver

Läs nedan 📖 manual på svenska för Omega Seamaster Diver (2 sidor) i kategorin Titta. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
1 / 2
SEAMASTER
DIVER 300 M CO-AXIAL 36.25 MM
Steel on steel
Caliber
2500 212.30.36.20.01.002
VCo-Axial escapement
lAutomatic
UChronometer
oSapphire crystal
tAnti-reflective treatment on both sides
dScrew-in crown
qHelium escape valve
G3-year International Warranty
sWater-Resistant to a relative pressure of 30 bar
(300 metres/1000 feet)
WATCH FUNCTIONS
The crown has 3 positions:
1. Normal position (wearing position): when the crown is positioned against the
case, the crown ensures that the watch is water-resistant.
Occasional winding: if the watch has not been worn for 48 hours or more, wind it
up with the crown in position 1.
2. Correcting the date: pull the crown out to position 2, turn the crown
backwards, then push the crown back to position 1.
NB: date-setting is not recommended between 8 pm and 2 am.
3. Time setting: hours – minutes – seconds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown forwards or backwards. Synchronise the
seconds by pushing the crown back to position 1 to coincide with a given time
signal.
2 / 2
HELIUM ESCAPE VALVE
How to use the helium escape valve? (fig. 2)
In its normal position (fig. 2.1), the OMEGA helium escape valve is perfectly
watertight thanks to the gaskets (B), but it is not functional, since it is screwed
down.
During the decompression phase, unscrew the crown of the valve in order to
release the mechanism (fig. 2.2). The valve is now watertight from the outside.
As the interior pressure becomes greater than the exterior pressure, it pushes the
gasket (A) out of its seating, thus releasing the gas (fig. 2.3). Once the pressure is
equalised, gasket (A) returns to its original position, pushed by the spring (C) (fig.
2.2).
This operation is automatically repeated several times during the decompression
phase. Once atmospheric pressure is reached, screw down the crown of the valve
(fig. 2.1).
Note: Even if the valve is unscrewed, and we strongly recommend that the valve
remains screwed down whenever the watch is immersed in water, the watch is still
water-resistant to a relative pressure of 5 Bar (50 metres). However, complete
water-resistance to the dial depth can only be achieved with gasket (B) and the
valve in the screwed down position.

Produktspecifikationer

Varumärke: Omega
Kategori: Titta
Modell: Seamaster Diver

Behöver du hjälp?

Om du behöver hjälp med Omega Seamaster Diver ställ en fråga nedan och andra användare kommer att svara dig




Titta Omega Manualer

Omega

Omega 8521 Bruksanvisning

14 September 2024
Omega

Omega 3890 Bruksanvisning

13 September 2024
Omega

Omega 8611 Bruksanvisning

13 September 2024
Omega

Omega 2006 Bruksanvisning

13 September 2024
Omega

Omega 1530 Bruksanvisning

13 September 2024
Omega

Omega 3205 Bruksanvisning

12 September 2024
Omega

Omega 3601 Bruksanvisning

12 September 2024
Omega

Omega 1426 Bruksanvisning

12 September 2024
Omega

Omega 1532 Bruksanvisning

12 September 2024
Omega

Omega 3313 Bruksanvisning

11 September 2024

Titta Manualer

Nyaste Titta Manualer