Opticon OPN-3002i Bruksanvisning

Opticon Streckkodsläsare OPN-3002i

Läs nedan 📖 manual på svenska för Opticon OPN-3002i (4 sidor) i kategorin Streckkodsläsare. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

OPN3002i Bluetooth Quick Start Guide

OPN3002i

Function Key

Feedback LED

USB Connector (Data/Charging)

Feedback Buzzer

Trigger Key

2D Imager

USB Data

Enabled

Disabled

SPP

(Serial Port Profile)

HID (Most Common)

(Human Interface Device)

Bluetooth Mode

Apple MFi

(Made for iDevice)

Note: Apple MFi mode requires the OPNTerm application which is available for download from the Apple App Store.

Bluetooth Options

• Bluetooth-HID - This connection mode is the most common and is normally supported by host devices

(computers, tablets and smartphones). Bluetooth-HID mode works as if a Bluetooth keyboard were

attached to the host device. This means that all data scanned will be as if typed. It is important that

there is a blinking cursor ready to accept your scanned data. Any text field is a valid place to scan a

barcode.

• Bluetooth-SPP - This connection mode can be complicated and is only recommended for advanced

users or users who have a dedicated application that manages connections to the scanner. It may also

be necessary when pairing with host devices that do not support Bluetooth-HID mode (such as most

older BlackBerry and Android devices). In this case, you may wish to download and install Opticon’s

wedge application (OpticonRL) from our website (see below).

• Apple MFi - This Bluetooth mode is a serial connection mode similar to Bluetooth-SPP though in a

proprietary format devised by Apple. It allows two-way communication with the scanner from an iOS

application that implements Opticon’s iOS SDKs (an example of which is called OPNTerm which can be

downloaded from the Apple App Store). The associated APIs allow iOS developers to create their own

OPN3002i applications or integrate the OPN3002i into their existing application.

Feedback Options

• Vibrate Only - The OPN3002i will only vibrate to alert the operator of a successful scan.

• - The OPN3002i will only beep to alert the operator of a successful scan.Beeper Only

• Beeper & Vibrate - The OPN3002i will both beep and vibrate to alert the operator of a successful scan.

Bluetooth Disconnect / Reconnect

• When connected, a Bluetooth connection can be broken by holding the trigger key for 5 seconds. This

will prolong battery life in some situations.

• When disconnected, a Bluetooth connection can be reestablished by holding the trigger key for 5

seconds. Barcode data stored when disconnected will be automatically transmitted.

Feedback

Beeper Only

Vibrate Only

Beeper & Vibrate

USB Data Options

• Enabled (Default) - This feature allows the data stored on the OPN3002i to

be transferred to an attached computer. Data is stored when the Bluetooth

connection goes out of range or is otherwise interrupted. Stored data is

automatically transmitted to the host device upon reestablishing the

Bluetooth connection. The Bluetooth connection mode also determines

the USB connection mode. Bluetooth-SPP and Apple MFi modes will

connect as USB-VCP (serial port) devices while Bluetooth-HID mode will

result in an USB-HID (keyboard) connection.

• Disabled - In this mode, the USB connector is used only to charge the

OPN3002i.

iOS Keyboard Options

• iOS On - This mode is a companion mode to Bluetooth-HID and is intended

for use with any Apple iDevice (iPhone, iPad and iPod) that has an on-

screen keyboard. When this feature is enabled, the on-screen keyboard

can be toggled on and off by use of the function key on the OPN3002i. The

typical behavior for an iDevice is to hide the on-screen keyboard when a

Bluetooth keyboard is paired (as the OPN3002i effectively is). Note that

this feature is not used in Apple MFi mode.

iOS Keyboard Options

iOS On

Defaults

Reset

OPNTerm

App Web Address

Produktspecifikationer

Varumärke:	Opticon
Kategori:	Streckkodsläsare
Modell:	OPN-3002i
Vikt:	634120 g
Bredd:	599.4 mm
Djup:	850.9 mm
Höjd:	1600.2 mm
Ljudnivå:	65 dB
Förpackningens vikt:	684920 g
Förpackningens bredd:	701 mm
Djuppackning:	960.1 mm
Förpackningshöjd:	1800.9 mm
Användarmanual:	Ja
LED-indikatorer:	Ja
Vormfaktor:	Tower
Ursprungsland:	China
Husets-färg:	Zwart
Antal fans:	8 ventilator(en)
Inklusive skruvar:	Ja
Antal skruvar:	24
Typ av kylning:	Ventilator
Effektivitet:	96.5 procent
Värmeavledning:	14334 BTU/h
(Ytter) huvudpaketets höjd:	1800.9 mm
(Ytter) huvudförpackningens bredd:	701 mm
(Ytter) huvudförpackningens bruttovikt:	684920 g
(Ytre) huvudpaketets längd:	960.1 mm
Kvantitet per (yttre) huvudkartong:	1 stuk(s)
AC-ingångsspänning:	480 V
AC-ingångsfrekvens:	50 - 60 Hz
Uttagstyper:	Hardwire
Ventilator diameter:	120 mm
Antal ingångsfaser:	3
Antal utgångsfaser:	3
Lastkapacitet:	60000 VA
AC utspänning:	480 V
Typ växelström (AC):	Hardwire
Ingångsström (ingångstransformator):	101 A
Startström (ingångstransformator):	920 A
Utström (ingångstransformator):	225 A
Effektivitet (vid halv belastning):	97.5 procent
Ingångsström (utgångstransformator):	173 A
Startström (utgångstransformator):	2020 A
Utström (utgångstransformator):	72 A
Nedre paneler ingår:	Ja
Antal bottenpaneler:	4