Ozito ECS-1935 Bruksanvisning
Läs nedan 📖 manual på svenska för Ozito ECS-1935 (8 sidor) i kategorin Sågmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/8
Electric Chainsaw
356mm Bar356mm Bar
1900W
3/8” LP
52
Electric Chainsaw
356mm Bar356mm Bar
1900W
3/8” LP
52
ELECTRIC
CHAINSAW
1900W 356mm
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 1900W
Bar Length: 356mm (14”)
Cutting Length Max.: 325mm
Chain Speed: 15.5m/s
Oil Tank Capacity: 160ml
Noise Rating: 108dB
Weight: 4.8kg
ECS-1935
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of If 36 months from the original date of purchase.
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: guide bar, chain and included accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
Ozito Industries Pty Ltd 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
ozito.com.au
Electric Chainsaw
Chain
0821
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
Guide Bar
Guide Bar Cover
Electric Chainsaw
356m m Bar356m m Bar
1900W
3/8” LP
52
Electric Chainsaw
356mm Bar356mm Bar
1900W
Electric Chainsaw
356mm Bar356mm Bar
1900W
3/8” LP
52
3/8” LP
52
+
Electric Chainsaw
356mm Bar356mm Bar
1900W
3/8” LP
52
A B
1. Power cord
2. Cord retainer
3. Oil level window
4. Oil tank cap
5. Side cover
6. Chain tensioning dial
7. Chain brake
8. Bucking spikes
9. Side cover lock
10. Guide bar
11. Chain
12. Lock-off switch
13. On/Off trigger
14 Rear handle
15. Sprocket
16. Front handle
17. Chain tensioning pin
ELECTRIC CHAINSAW
ACCESSORIES
KNOW YOUR PRODUCT
1. GUIDE BAR & CHAIN
ASSEMBLY
1 2 3 4 5 6 7 8
12
10 11
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Fitting the Chain & Bar
1. Fully unscrew the side cover lock
by turning it in an anti-clockwise
direction.
2. Remove the side cover.
3. Fit the chain over the guide bar,
making sure that the cutters are
facing in the direction of rotation.
4. Place the guide bar and chain
in position, ensuring that the
chain is around sprocket (A).
Also ensure that the chain
tensioning pin (B) fits into the
guide bar. If it does not fit, it
can be adjusted slightly with
the chain tensioning dial. The
chain must not slip off the bar
when you do this.
15 1613
18. Guide bar cover
WARNING! ALWAYS WEAR HEAVY GLOVES WHEN
HANDLING THE CHAIN AS IT IS VERY SHARP AND CAN
CUT YOU WHEN IT IS NOT MOVING.
5. Pull the guide bar forward until
the chain is closely seated.
Make sure that all the drive
links are in the groove of the guide bar.
6. Place the side cover at a slight angle at the
beginning of assembly, then secure with the
side cover lock, turning several times for the
thread to engage.
Note: Do not fully tighten the side cover lock
until after adjusting the chain tension.
14
18
9
17
3mm gap is
the ideal tension
Electric Chainsaw
356mm Bar356mm Bar
1900W
3/8” LP
52
Electric Chainsaw
356mm Bar356mm Bar
1900W
Electric Chainsaw
356mm Bar356mm Bar
1900W
3/8” LP
52
3. Refit cap and clean any oil spillage.
4. Always fill the oil tank when the oil
level falls below the minimum mark
on the oil level window.
Note: Always check the oil level
window before and during the use of
the chainsaw.
1. Unscrew the side cover lock a few
turns to ensure it is loose.
2. Adjust the chain tension with the
chain tensioning dial. Rotating the dial
downwards increases the tension and
rotating the dial up decreases the chain
tension.
The tension is correct when the chain
can be pulled 3mm away from the
guide bar when using your finger and
thumb.
Do not over-tighten as this will
reduce the life of the chain and guide
bar.
Tensioning the Chain
SETUP & PREPARATION
2. CHAIN TENSION
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
WARNING! ALL THE CHAIN LINKS MUST LIE
PROPERLY IN THE GROOVE OF THE GUIDE BAR.
3. Tighten the side cover lock.
WARNING!: THE CHAIN SHOULD BE ADJUSTED
BEFORE FIRST USE, AGAIN AFTER 2 - 3 MINUTES
OF OPERATION AND RECHECKED AND ADJUSTED IF
NECESSARY AFTER EACH 30 MINUTES OF USE. TAKE CARE
NOT TO OVER TENSION THE CHAIN.
3. LUBRICATION
WARNING! ONLY USE OIL THAT IS EXPRESSLY
LABELLED “CHAIN BAR OIL”
Filling with Oil
1. Place the chainsaw on a flat
surface and remove the oil
tank cap.
2. Slowly fill the tank with chain
bar oil, ensuring that no dirt
enters the tank. The capacity
of the chain oil tank is 160ml.
WARNING! NEVER OPERATE THE CHAINSAW UNLESS
THE CHAIN AND BAR ARE LUBRICATED.
5. To check the lubricating system,
switch on the chainsaw and hold it
with the guide bar and chain above
some light coloured paper such as
newspaper. A steadily increasing
stain caused by oil spray shows the
lubricating system is working.
Note: Chain bar oil may leak if the tool
is left for long periods. This is normal.
If the tool is to be left unused for an extended time, drain the oil from the
tool. Refill before use.
Use a funnel (not supplied) and fill the tank slowly to prevent spilling the
oil. Do not overfill the tank.
Produktspecifikationer
| Varumärke: | Ozito |
| Kategori: | Sågmaskin |
| Modell: | ECS-1935 |
Behöver du hjälp?
Om du behöver hjälp med Ozito ECS-1935 ställ en fråga nedan och andra användare kommer att svara dig
Sågmaskin Ozito Manualer
24 December 2024
6 Oktober 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
21 September 2024
10 September 2024
6 September 2024
Sågmaskin Manualer
- Sågmaskin Bosch
- Sågmaskin AEG
- Sågmaskin DeWalt
- Sågmaskin Ford
- Sågmaskin Al-ko
- Sågmaskin Silverline
- Sågmaskin Brennenstuhl
- Sågmaskin Ferm
- Sågmaskin Workzone
- Sågmaskin Clarke
- Sågmaskin Gude
- Sågmaskin Makita
- Sågmaskin Draper
- Sågmaskin Tryton
- Sågmaskin Hitachi
- Sågmaskin Black And Decker
- Sågmaskin Vonroc
- Sågmaskin Remington
- Sågmaskin ACG
- Sågmaskin Maestro
- Sågmaskin Stanley
- Sågmaskin Skil
- Sågmaskin Hyundai
- Sågmaskin Yato
- Sågmaskin Hilti
- Sågmaskin Ryobi
- Sågmaskin Florabest
- Sågmaskin Festool
- Sågmaskin Metabo
- Sågmaskin Parkside
- Sågmaskin Worx
- Sågmaskin Meec Tools
- Sågmaskin Milwaukee
- Sågmaskin Hikoki
- Sågmaskin Sun Joe
- Sågmaskin Dremel
- Sågmaskin Sovereign
- Sågmaskin Tacklife
- Sågmaskin Hazet
- Sågmaskin Einhell
- Sågmaskin Gardena
- Sågmaskin Baumr-AG
- Sågmaskin Yard Force
- Sågmaskin Ferrex
- Sågmaskin Luxor
- Sågmaskin Husqvarna
- Sågmaskin Maktec
- Sågmaskin Bort
- Sågmaskin Tanaka
- Sågmaskin Ideal
- Sågmaskin Craftsman
- Sågmaskin Power Craft
- Sågmaskin Powerplus
- Sågmaskin Stiga
- Sågmaskin Porter-Cable
- Sågmaskin Cotech
- Sågmaskin Genesis
- Sågmaskin Trotec
- Sågmaskin Troy-Bilt
- Sågmaskin Cobra
- Sågmaskin Hammer
- Sågmaskin Challenge
- Sågmaskin Topcraft
- Sågmaskin Texas
- Sågmaskin Martha Stewart
- Sågmaskin Spear & Jackson
- Sågmaskin Scheppach
- Sågmaskin Atika
- Sågmaskin Gamma
- Sågmaskin McCulloch
- Sågmaskin Sterwins
- Sågmaskin Powerfix
- Sågmaskin Matrix
- Sågmaskin Kress
- Sågmaskin Stihl
- Sågmaskin Bavaria
- Sågmaskin Dolmar
- Sågmaskin Shindaiwa
- Sågmaskin Hobart
- Sågmaskin Lionelo
- Sågmaskin Flex
- Sågmaskin Powerworks
- Sågmaskin Duro
- Sågmaskin Prime3
- Sågmaskin Zipper
- Sågmaskin Mafell
- Sågmaskin Greenworks
- Sågmaskin Fieldmann
- Sågmaskin Qualcast
- Sågmaskin Pattfield
- Sågmaskin Defort
- Sågmaskin Fuxtec
- Sågmaskin IKRA
- Sågmaskin Truper
- Sågmaskin Masport
- Sågmaskin Grizzly
- Sågmaskin Echo
- Sågmaskin Solo
- Sågmaskin Bruder Mannesmann
- Sågmaskin Cocraft
- Sågmaskin Powerblade
- Sågmaskin Maruyama
- Sågmaskin Herkules
- Sågmaskin Meister Craft
- Sågmaskin Toolcraft
- Sågmaskin RIDGID
- Sågmaskin Łucznik
- Sågmaskin Batavia
- Sågmaskin Proxxon
- Sågmaskin Gardenline
- Sågmaskin Westfalia
- Sågmaskin Holzmann
- Sågmaskin Fein
- Sågmaskin Oregon Scientific
- Sågmaskin Huvema
- Sågmaskin Black Decker
- Sågmaskin Elu
- Sågmaskin Blucave
- Sågmaskin Max Bahr
- Sågmaskin Plantiflor
- Sågmaskin Lux Tools
- Sågmaskin Kompernass
- Sågmaskin Goon
- Sågmaskin Triton
- Sågmaskin BGU
- Sågmaskin Avantco
- Sågmaskin Wolfcraft
- Sågmaskin Dedra
- Sågmaskin Kreg
- Sågmaskin Sthor
- Sågmaskin Verto
- Sågmaskin Vulcan
- Sågmaskin Germania
- Sågmaskin FOM
- Sågmaskin Anova
- Sågmaskin Hurricane
- Sågmaskin Budget
- Sågmaskin Ergofix
- Sågmaskin Challenge Xtreme
- Sågmaskin Global
- Sågmaskin King Craft
- Sågmaskin EGO
- Sågmaskin Maxx
- Sågmaskin Pro-Cut
- Sågmaskin Graphite
- Sågmaskin Narex
- Sågmaskin Rikon
- Sågmaskin Elektra Beckum
- Sågmaskin Duro Pro
- Sågmaskin Alpha Tools
- Sågmaskin Toolson
- Sågmaskin Felisatti
- Sågmaskin Power Smart
- Sågmaskin Backyard Pro Butcher Series
- Sågmaskin Toledo
- Sågmaskin EFA
- Sågmaskin Erbauer
- Sågmaskin Exakt
- Sågmaskin Jonsered
- Sågmaskin Gude Pro
- Sågmaskin MSW
- Sågmaskin Backyard Pro
- Sågmaskin Royal Catering
- Sågmaskin Robust
- Sågmaskin Ultranatura
- Sågmaskin FIXIT
- Sågmaskin Einhell Bavaria
- Sågmaskin Ergotools Pattfield
- Sågmaskin MyTool
- Sågmaskin McKenzie
- Sågmaskin Proviel
- Sågmaskin Morrison
- Sågmaskin Garland
- Sågmaskin Bavaria By Einhell
- Sågmaskin Prowork
- Sågmaskin Donau Elektronik
- Sågmaskin Chicago Pneumatic
- Sågmaskin Rona
- Sågmaskin Bestgreen
- Sågmaskin CMI
- Sågmaskin MacAllister
- Sågmaskin TAURUS Titanium
- Sågmaskin Maxbear
- Sågmaskin Evolution
- Sågmaskin Extralink
- Sågmaskin Yellow Garden Line
- Sågmaskin Stalco
- Sågmaskin Total
- Sågmaskin Turbo-Silent
Nyaste Sågmaskin Manualer
10 Januari 2025
8 Januari 2025
8 Januari 2025
8 Januari 2025
8 Januari 2025
8 Januari 2025
8 Januari 2025
8 Januari 2025
7 Januari 2025
7 Januari 2025