Ozito PXCMSS-210 Bruksanvisning

Ozito Inte kategoriserad PXCMSS-210

Läs nedan 📖 manual på svenska för Ozito PXCMSS-210 (9 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/9
SPECIFICATIONS
Voltage: 18V
No Load Speed: 3,000/min
Blade Diameter: 210mm (81/4”)
Blade Teeth: 40TCT
Blade Bore: 30mm
Cutting Capacity:
0° Mitre x 0° Bevel: 120x60mm
45° Mitre x 0° Bevel: 83x60mm
0° Mitre x 45° Bevel: 120x34mm
45° Mitre x 45° Bevel: 83x34mm
Weight: 9.3kg
210MM
MITRE SAW
INSTRUCTION MANUAL
ozito.com.au
WHAT’S IN THE BOX
Compound Mitre Saw
Hex Key
Material Clamp
Dust Bag
PXCMSS-210
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
1117
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts, for example: cutting blades.
1. FITTING THE BATTERY & CLAMP
Inserting & Removing the Battery
1 Slide the battery into the seating
above the saw handle until it
clicks into place.
2 To remove, press and
hold the battery release
tab and then slide out.
a
b
Attaching / Adjusting the Material Clamp
2 Adjust the material
clamp into the
desired location and
tighten all locking
knobs.
1 Loosen the clamp locking knobs
and insert the shaft into the hole.
Note: The clamp can be mounted on
either side of the blade.
Note: When performing bevel cuts, the work clamp must be on the opposite
side of the bevel (otherwise it will interfere with the cutting action).
3 The large screw can be lowered
onto the timber workpiece in
order to secure the workpiece
while performing a cut.
KNOW YOUR PRODUCT SETUP & PREPARATION
CORDLESS MITRE SAW
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
For optimal performance, we recommend the use of a 3.0Ah battery or
higher to operate this Power X Change Mitre Saw.
1 Handle Lock Button
2 Spindle Lock
3 Head Locking Pin
4 Material Clamp
5 Extension Supports
6 On/Off Trigger
7 Bevel Guide
8 Rear Fence
9 Mitre Guide
10 Mitre Locking Knob
11 Blade
12 Lower Blade Guard
13 Depth Stop
14 Dust Port
15 Bevel Locking Lever
16 Material Stop
Side View
Front View
45
0
30
0
15
0
0
0
15
0
30
0
45
0
20 4 0 50 60 100 12 0 14 0 1 60 1 80
11
12
16
1
2
3
4
5
13
14
15
6
8
7
9
10
WARNING! ENSURE THE TOOL IS SWITCHED OFF AND
THE BATTERY IS REMOVED BEFORE PERFORMING ANY
OF THE FOLLOWING TASKS.
2. EXTENSION SUPPORTS 3. ADJUSTMENTS
The extension supports can be extended outwards allowing additional support
when cutting longer workpieces.
The extension supports allow feature a material stop that can be raised in
order to contact the end of the workpiece. This feature is used to quickly
position material enabling you to cut multiple pieces at the same length.
Adjusting the Extension Supports
Using the Material Stops
Bevel Adjustment
Mitre Adjustment
45
0
30
0
15
0
0
0
20 40
45
0
30
0
15
0
0
0
1
20 40
20 40 50 60 100 120 14 0 160 18 0
45
0
30
0
15
0
0
0
15
0
30
0
45
0
20 40 50 60 100 120 140 160 180
45
0
45
45
0
30
0
15
0
0
0
15
0
30
0
45
0
20 40 50 60 100 120 140 160 18
2 Slide the extension
support to the
desired location
and then release
the locking lever to
secure in position.
2 Once the material
stop is set, you can
place the workpiece
onto the table and
slide up to the stop.
Secure the material
and then complete
the cut.
2 Tilt the head using
the bevel scale as a
reference.
2 Rotate the mitre
table to the desired
mitre angle and
then lock in position
using the mitre
locking knob.
1 Press the support locking lever
underneath the support arm to
allow it to slide.
1 Raise the material stop upwards,
then adjust the extension support
to the desired distance away
from the blade.
1 Loosen bevel locking lever at the
rear of the saw.
1 Loosen the mitre locking knob at
the front of the saw.
3 Tighten the bevel locking lever
to secure at the desired bevel
angle.
WARNING! ENSURE THE BEVEL LOCK IS TIGHT
BEFORE MAKING A CUT. FAILURE TO DO SO MAY
RESULT IN THE CUTTING HEAD MOVING DURING
OPERATION AND CAUSE SERIOUS PERSONAL INJURY.
Note: The mitre table features positive click stops at 0°, 5°, 10° 15°, 22.5°,
30°, 35°, 40° and 45° for quick setting of common mitre angles.

Produktspecifikationer

Varumärke: Ozito
Kategori: Inte kategoriserad
Modell: PXCMSS-210

Behöver du hjälp?

Om du behöver hjälp med Ozito PXCMSS-210 ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Ozito Manualer

Ozito

Ozito PXBSPS-180 Bruksanvisning

6 Oktober 2024
Ozito

Ozito SSH-240 Bruksanvisning

6 Oktober 2024
Ozito

Ozito PXTLS-905 Bruksanvisning

3 Oktober 2024
Ozito

Ozito ADWH-913V Bruksanvisning

2 Oktober 2024
Ozito

Ozito PXBLEK-418 Bruksanvisning

24 September 2024
Ozito

Ozito PXPPS-1820 Bruksanvisning

21 September 2024
Ozito

Ozito PXNGS-218 Bruksanvisning

21 September 2024
Ozito

Ozito PXHTBK-2518 Bruksanvisning

21 September 2024
Ozito

Ozito DMC-1000 Bruksanvisning

21 September 2024
Ozito

Ozito PSR-5732U Bruksanvisning

20 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024