Paasche H-CARD Bruksanvisning

Läs nedan 📖 manual på svenska för Paasche H-CARD (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
INSTRUCTIONS AND PARTS LIST H AIRBRUSH 8/06/2019
H Model Airbrush
Single Action–External Mix–Siphon Feed
Instruction Manual & Replacment Parts
OPERATING INSTRUCTIONS:
Approximate Working Pressures:
• 20lbs.orLess:Stippleandgranulatede󰀨ects,pressurewillvarywithviscosityofuid.
20to30lbs.:Mediumconsistencywatercolors,inks&dyes.
30 lbs. or More:Heavyuids,acrylics,reducedlacquers,varnishes,paintsorceramicglaze.
Sizes:
• H-1(.45mm)HeadandHC-1-3Aircapforlightuids.
• H-3(.64mm)HeadandHC-1-3Aircapformediumuids.
• H-5(1.06mm)HeadandHC-5Aircapforheavieruids.
1.Attach hose to airsupplyand allow airto blow afew seconds. Shut o󰀨 beforeattaching to Airbrush. This procedurewill
removedirtfromairlineandhose.
Caution: Hold rmly and point away from face.
2. Attachhosecouplingtotheairbrush.
3.AttachColorCuporBottletoHN-1-3,or5Needlebyexertingarmtwistingmotiontottaperedtubesecurelyintotapered
Needleinlet.
4. FillColorCuporBottle1/2to3/4full.Useeyedropperorbrushforaddingsmallamountsofcolortometalcolorcup.Whenusing
ColorBottle,ventholemustbekeptopen.
5.ToSpray,holdAirbrushlikeapencilcomfortablybetweenthumbandforengerusingmiddlengerasaguideandsupport.
Likewriting,holdforengereasilyonH-155FingerButtonandPresstoopenairvalve.
6.Regulate volume of color and size of spray by rotating HT-1,3 or 5 Tipclockwise to increase andcounter clockwise to
decreaseowofcolor.
7.StippleAdjustment:Reducingtheairlinepressureistheeasiestmethodusedwhencreatingastipplede󰀨ectwiththeairbrush.
Pressurecanbereducedbyusinganyofthefollowingitems:3ANeedleValveinstalledontheH-128AValveCasingofthe
AirbrushorbyusingtheR-75AirRegulatorandreducingthepressure.
8.Toadjustforheavieruids,turntipwideopen,loosensetscrew,slideneedlebacktoobtainbetterow.
CARE AND CLEANING:
1.Pouranyremainingcolorbackintoitsoriginalcontainer.
2.WipeColorCuporBottleclean,usingclothmoistenedwithpropersolvent.
3.HoldAirbrushatadownwardangleandputafewdropsofsolventthroughColorAdjustingPartAssembly.Toushoutthe
remainingcolorintheHColorAdjustingPartAssembly,applypressuretothe H-155FingerButton.
4. ApplyatinydabofVaselinetotheHColorAdjustingPartandHC-Aircapthreadseverytwoorthreemonthstopreventcolor
buildupandconsequentfreezingoftheColorAdjustingPartAssemblyandAircap.
HOW TO OPEN CLOGGED FLUID PASSAGES:
1.AgitatecolorinBottleAssemblybyplacingngermomentarilyoverHC-AircapwhileairispassingthroughtheAirbrush.This
willblowcolorbackintobottlethusopeningcloggeduidpassages.Do not do this with open cup as color may blow out
of cup.
2.ShouldH-1,3or5ColorAdjustingPartAssemblybecomeclogged,loosenH-153SetScrew,unscrewHT-1,3or5Tipfrom
HNNeedle,gentlypullbackthroughball-shapedsupportandremoveTip.
3.CleanPartscarefully,usingnothingharderthanawoodentoothpick.
4. Toreassemble,reversethisprocedure,makingsuretheshoulderoftheNeedleseatsupagainstball-shapedsupport.
5.Iftheneedleandtiparecompletelyclogged,soakinaclosedbottleofpropersolventuntilclean.
INTRODUCTION:
Paasch H model Airbrush features machined Brass Body and Nickel
SilverColorPart, simplicityofdesign andeaseinoperation.Theair and
colorfeeds are independentand adjustable togive axed line, shadeor
stipplee󰀨ect.
For Multi-Language Manuals Go To: www.paascheairbrush.com
2
H - AIRBRUSH MODEL REPLACEMENT PARTS
# Part No. Description
1. HC-1-3,5  Aircapw/O-ring(SelectSize)
2. 3A-4  “O”Ring(Packof6)
3. H-1,3,5  ColorAdjustingPart(SelectSize)
4. HT-1,3,5  Tip(SelectSize)
5. H-185  Packing
6. H-184  PackingNut
7.  Needle(SelectSize)HN-1-3,5
8.    SetScrewH-153
9. H-150N  Shell(IncludesH-128A)
10. H-155  FingerButton
11. H-143  Handle(Nylon)
12. HVL-200 Metal Handle (Aluminum - optional)
14. H-128A  ValveCasing
15. H-192A  ValvePlungerw/A-53
16. A-53  ValveWasher(Packof6)
17.   ValveSpringA-22
18.  AirValveNutA-23R
19. F-186  Wrench
20. A-34 Hanger
H-OldStyleReplacementParts
22. H-175A AirValveAssembly
23. A-23R AirValveNut
24. A-22  ValveSpring
25. H-21A ValvePlunger
26. A-52  ValveWasher(Packof6)
27. H-128A ValveCasing
28.   NeedleGuideSpringA-143
29. H-156 Stipple Adjuster
30. H-157  FingerLeverAssembly
Old Style Replacement Parts
H-1/4-OZ
(1/4oz Metal)
H-3-OZ
(3oz Glass)
H-1-OZ
(1oz Glass)
HP-3-OZ
(3oz Plastic)
H-2-OZ
(2oz Metal)
A-1/8-4, 6, 8. 10, 15, 20, 25 or 50
Braided Air Hose with couplings (Select Length)
(3A-4 -- O-ring for airbrush coupling)
WARNING: Spraymaterialsmaybe harmfulifinhaledor
allowedtocomeintocontactwiththeskinoreyes.Consult
theproductlabelandMaterialSafetyDataSheetsupplied
for the spray material.  Follow all safety precautions.
CAUTION: Well Ventilated Area Required to remove
fumes,dustoroverspray.Maximum Air Pressure 75 P.S.I.
HP-8-OZ
(8oz Plastic)
BA-30-3P
(3oz Plastic)
BA-30-1P
(1oz Plastic)
BA-30-4P
(3oz Plastic)
BA-30-2P
(1oz Plastic)
e BA bottle assemblies are a new cover conguration and all use plastic
bottle. e 2P and 4P are narrow neck and work with most airbrush paint
bottles like Createx and Paasche
For Multi-Language Manuals Go To: www.paascheairbrush.com

Produktspecifikationer

Varumärke: Paasche
Kategori: Inte kategoriserad
Modell: H-CARD
Färg på produkten: Wit
Inbyggd display: Nee
Vikt: 4400 g
Bredd: 382 mm
Djup: 362 mm
Höjd: 141 mm
Sladdlängd: 4.5 m
Ljudnivå: 37 dB
Användarmanual: Ja
Kraftkälla: AC
Placering: Desktop, Ceiling
Fjärrkontroll: IR
Ethernet LAN: Ja
Videolägen som stöds: 480i, 480p, 525i, 576i, 576p, 625i, 720p, 1080i, 1080p
Medföljande kablar: AC, VGA
Integrerad minneskortläsare: Nee
Typiskt kontrastförhållande: 16000:1
Zoomkapacitet: Ja
Marknadspositionering: Zeer korte werpafstand
Projektorns ljusstyrka: 3700 ANSI lumens
Projektionsteknik: 3LCD
Projektorns inbyggda upplösning: WXGA (1280x800)
Keystone-korrigering, vertikal: -5 - 5 °
Keystone-korrigering, horisontell: -5 - 5 °
Lämplig för skärmstorlekar: 60 - 100 "
Projektionsavståndsmål: 0.41 - 0.69 m
Antal färger: 16.78 miljoen kleuren
Matrisstorlek: 0.59 "
Antal USB 2.0-portar: 2
VGA (D-Sub) port(ar): 2
Antal HDMI-portar: 2
Typ av seriell anslutning: RS-232C
Mikrofon, linjeingång: Ja
Audio-ingan (L, R): 1
PC-ljud ingång: Ja
PC-ljudutgång: Ja
Kompositvideoingång: 1
HDMI-kontakttyp: Volledige grootte
DVI-port: Nee
Antal Ethernet LAN (RJ-45)-portar: 1
Smart TV: Nee
Fokus: Auto
Zoomtyp: Auto
Diafragma (FF): 1.8 - 1.8
Brännvidd: - mm
Ljuskällans livslängd: 4000 uur
Typ av ljuskälla: Lamp
Monteringsalternativ för kabellås: Ja
Kabellåsspårtyp: Kensington
Inbyggda högtalare: Ja
Genomsnittlig effekt: 16 W
Strömförbrukning (i standby): 0.35 W
Lösenordsskydd: Ja
Antal batterier/batterier som stöds: 2
Certifiering: CE, EN61000-3-2, EN61000-3-3, EN55032\n(A), EN55024 (EMC), EN60950-1, WEEE/RoHS
Bildförhållanden som stöds: 4:3, 14:9, 16:10, 16:9
Zoomförhållande: 1.35:1
Kastförhållande: 0.3:1
HDCP: Ja
Grafikupplösningar som stöds: 640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 1680 x 1050 (WSXGA+)
On Screen Display (OSD)-talen: ARA, CHI (SIMPL), CHI (TR), CRO, CZE, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HEB, HUN, IND, ITA, JPN, KOR, LAT, LIT, NOR, PER, POL, POR, RUM, RUS, SLV, SWE, THA, TUR, VIE
PC-ingang (D-Sub): Ja
Antal per paket: 1 stuk(s)
On Screen Display (OSD): Ja
Antal skärmspråk: 35
Ljuskällans livslängd (sparläge): 6000 uur
Ljudnivå (ekonomiläge): 32 dB
Antal portar USB 2.0 Typ-B: 1
Projektionslägen: Ceiling, Rear
Projektorns ljusstyrka (ekonomiläge): 3034 ANSI lumens
Fjärrkontroll ingår: Ja
Wifi: Nee
AC-ingångsspänning: 100-120/220-240 V
AC-ingångsfrekvens: 50 - 60 Hz
Strömförbrukning (typiskt): 360 W
Batterier-ingår: Ja
Typ produkt: Projector met ultrakorte projectieafstand
Harmoniserad systemkod (HS): 85286200
Videofärglägen: Blackboard, Cinema, Dynamic, Photo, Whiteboard
Interaktiv: Nee

Behöver du hjälp?

Om du behöver hjälp med Paasche H-CARD ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Paasche Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer