PAC GMK403 Bruksanvisning

Läs nedan 📖 manual på svenska för PAC GMK403 (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
©2016 AMERICAN INTERNATIONAL INDUSTRIES, INC. TECH Ver.1/16 PRINT Ver. 8/13
GMK403 Mounting Kit
VEHICLE APPLICATION
Buick
2013-16 ENCLAVE
Chevrolet
2013-16 TRAVERSE
GMC
2013-16 ACADIA
iGMK403
WWW.AIUS.NET
2500 East Francis Street Ontario, CA 91761, U.S.A.
USA Sales (800) 336-6500
Canada Sales (888) 922-3006
CUSTOMER HELP LINE
USA 800-323-4329 • Canada 800-245-8777
DASH DISASSEMBLY INSTRUCTIONS
1. Carefully unclip the dash trim bezel from around the radio (see photo below),
disconnect the climate control harness and remove trim bezel.
2. Remove the (4) Phillips screws securing the radio/hazard button assembly
to the sub-dash.
3. Pull radio forward, disconnect the wire harness(s) and antenna lead and
remove radio/hazard button assembly.
4. There is no need to unplug and remove the hazard button assembly,
just set aside carefully.
SINGLE ISO w/POCKET INSTALLATION INSTRUCTIONS
1. Insert ISO brackets to rear of kit as shown in Figure A
2. Insert pocket into lower section of kit from rear & lock into slots of mounting brackets.
3. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible or screws supplied with kit.
4. Slide radio forward or backward for desired look and tighten screws.
5. Attach a rear support bracket to the rear of the new radio and adjust as necessary
to support the weight of the radio (Optional)
23
Fig A
ISOBRK
ISOBRK
DOUBLE DIN INSTALLATION INSTRUCTIONS
1. Attach ISO brackets to the rear of the main mounting kit.
2. Slide radio into kit from rear & attach to ISO mounting brackets using
screws supplied with radio when possible or screws supplied with kit
(do not tighten screws at this time).
3. Slide radio forward or backward for your desired look and then tighten
the mounting screws.
4. Suggested...Attach rear support.
Fig B
ISOBRK
ISOBRK
Remove shaded tabs
on left and right sides
of the brackets
(Right side not shown)

Produktspecifikationer

Varumärke: PAC
Kategori: Inte kategoriserad
Modell: GMK403

Behöver du hjälp?

Om du behöver hjälp med PAC GMK403 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad PAC Manualer

PAC

PAC RP4-GM31 Bruksanvisning

26 September 2024
PAC

PAC NU-GM51 Bruksanvisning

26 September 2024
PAC

PAC NAV-1129 Bruksanvisning

26 September 2024
PAC

PAC LP7-2R Bruksanvisning

26 September 2024
PAC

PAC LP7-4 Bruksanvisning

26 September 2024
PAC

PAC GMK367B Bruksanvisning

26 September 2024
PAC

PAC CP1-FRD1 Bruksanvisning

26 September 2024
PAC

PAC C2A-CHY5 Bruksanvisning

26 September 2024
PAC

PAC NU-GM3 Bruksanvisning

26 September 2024
PAC

PAC CP1-TSL1 Bruksanvisning

26 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer