PAC LPHFD31 Bruksanvisning

PAC Inte kategoriserad LPHFD31

Läs nedan 📖 manual på svenska för PAC LPHFD31 (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

PAC-audio.com

Rev.7

1/5/2022

LPH Harness Instruction Guide

Wiring Connection Chart (All Models)

MODELS:

• LPA-E4

• LPA2.4 / LPA2.2

• LPA1.4 / LPA1.2

Important Note: This harness is provided

with a inline fuse installed. Please remove

prior to install and reinsert once nished.

If your vehicle does not provide ACC

source your harness will not have a

"RED" wire to connect.

It will use DC O󰀨set to turn on as well

as trigger the "REM OUT" on the LPA.

On LPA-E4 there will be a jumper that

you can move based on your application.

This harness is designed to work on

OEM NON-AMPLIFIED systems.

Connect the RED BUTT Connector to

the aftermarket system turn on for your

ampliers.

Fully open terminals

before inserting wire.

PAC-audio.com

Rev.7

1/5/2022

LPH Harness Instruction Guide

Example Installation - 4-Channel Amplier - (HARNESS CUT REQUIRED)

Example Installation - Mono Amplier - (HARNESS CUT NOT REQUIRED)

RCA FROM LPA

"CUT HERE

AND INSULATE"

• Cut the harness close as possible to the

"CUT HERE AND INSULATE" label. You

must insulate wires to prevent damage to

OEM radio.

• The cut speaker wires will need to be

connected to your aftermarket amplier.

(REFER TO LABEL ON HARNESS)

• Please refer to the chart on the rst page

for wiring your loose wires to your LPA.

• This harness is designed to work on OEM

NON-AMPLIFIED systems.

OEM RADIO HARNESS

LPH TO RADIO CONNECTION

LOOSE WIRES TO LPA

REM OUT FROM LPA

DO NOT CUT!!

• If using a 2-Channel input LPA

use the front speaker wires

and insulate the remaining rear

speaker wires.

• DO NOT CUT the speaker wires

inbetween the "CUT HERE"

Lables in order to keep the

factory speakers functional.

• This harness is designed to

work on OEM NON-AMPLIFIED

systems.

OEM RADIO HARNESS

LOOSE WIRES TO LPA

"CUT HERE AND

INSULATE"

"CUT HERE AND CONNECT TO

AFTERMARKET AMPLIFIER"

LPH TO RADIO CONNECTION

RCA FROM LPA

REM OUT FROM LPA

AFTERMARKET AMPLIFIER

"CUT HERE AND CONNECT TO

AFTERMARKET AMPLIFIER"

(CUT SPEAKER WIRES)

Produktspecifikationer

Varumärke:	PAC
Kategori:	Inte kategoriserad
Modell:	LPHFD31
Typ av operation:	Touch
Färg på produkten:	Black, Stainless steel
Bredd:	900 mm
Djup:	500 mm
Nettoskatt:	218 W
Ljudnivå:	66 dB
Energie-efficiëntieklasse:	B
Årlig-energiförbrukning:	45 kWu
Snäll:	Muurmontage
Avgasanslutningsdiameter:	150 mm
Belysningsstyrka:	273 Lux
Husmaterial:	Glass, Stainless steel
Maximal utsugskapacitet:	587 m³/uur
Extraktionsmetod:	Afvoerend/recirculerend
Vätskedynamisk effektivitetsklass:	B
Ljuseffektivitetsklass:	A
Fettfilter effektivitetsklass:	D
Typ lampa:	LED
Soort vetfilter:	Aluminium
Höjd (min):	548 mm
Höjd (max):	1000 mm
Antal hastigheter:	3
Druk (Pa):	402
AC-ingångsspänning:	220-240 V
AC-ingångsfrekvens:	50 - 60 Hz
Energieffektivitetsskala:	A+++ tot D