Panasonic PV-C1332W Bruksanvisning

Panasonic Tv PV-C1332W

Läs nedan 📖 manual på svenska för Panasonic PV-C1332W (40 sidor) i kategorin Tv. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/40

Please read these instructions carefully before attempting to connect,

operate, or adjust this product. Please save this manual.

Spanish Quick Use Guide is included.

(Guía para rápida consulta en español está incluida.)

Combination VCR

Operating Instructions

PV-C1322/PV-C1332W

PV-C1342/PV-C1352W

LSQT05 A84

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com

Basic Operation

Initial Setup TV Operation

Timer Operation

Advanced Operation

For Your Information

• Initial Setup and Connection Procedures are on pages 8 and 9.

Model No.

As an ENERGY STAR

Partner,

Matsushita Electric Corporation of America has

determined that this product or product model meets

the ENERGY STAR

guidelines for energy efficiency.

LSQT0516A_01p09+1.p65 11/13/2001, 11:39 AM1

2For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com

Important Safeguards and Precautions

INSTALLATION

1 POWER SOURCE CAUTION

Operate only from power source indicated on unit

or in this manual. If uncertain, have your Electric

Utility Service Company or Video Products Dealer

verify your home power source.

2 POWER CORD PLUG

For safety, this unit has a polarized type plug (one

wide blade), or a three-wire grounding type plug.

Always hold the plug firmly and make sure your

hands are dry when plugging in or unplugging the

AC power cord. Regularly remove dust, dirt, etc.

on the plug.

POLARIZED PLUG CAUTION:

The plug fits into outlet one way. If it cannot be fully

inserted, try reversing it. If it still will not fit, have an

electrician install the proper wall outlet. Do not

tamper with the plug.

GROUNDING PLUG CAUTION:

The plug requires a three-hole grounding outlet.

If necessary, have an electrician install the proper

outlet. Do not tamper with the plug.

3 POWER CORD

To avoid unit malfunction, and to protect against

electrical shock, fire or personal injury:

-Keep power cord away from heating appliances

and walking traffic. Do not rest heavy objects on,

or roll such objects over the power cord.

-Do not tamper with the cord in any way.

-An extension cord should have the same type

plug (polarized or grounding) and must be

securely connected.

-Overloaded wall outlets or extension cords is a

fire hazard.

-Frayed cords, damaged plugs, and damaged or

cracked wire insulation are hazardous and

should be replaced by a qualified electrician.

4 DO NOT BLOCK VENTILATION HOLES

Ventilation openings in the cabinet release heat

generated during operation. If blocked, heat

build-up may result in a fire hazard or heat

damage to cassettes.

For your protection:

a. Never cover ventilation slots while unit is ON,

or operate unit while placed on a bed, sofa,

rug, or other soft surface.

b. Avoid built-in installation, such as a book case

or rack, unless properly ventilated.

AVOID EXTREMELY HOT LOCATIONS OR

SUDDEN TEMPERATURE CHANGES

Do not place unit over or near a heater or

regulator, in direct sunlight, etc. If unit is suddenly

moved from a cold place to a warm place,

moisture may condense in unit and on the tape

causing damage.

6 TO AVOID PERSONAL INJURY

• Never place unit on support or

stand that is not firm, level,

and adequately strong.

The unit could fall causing

serious injury to a child or

adult and damage to the unit.

• Move any appliance and cart

combination with care. Quick

stops, excessive force, and uneven

surfaces may cause objects to overturn.

• Carefully follow all operating instructions.

USING THE UNIT

Before unit is brought out of storage or moved to a new location,

refer again to the INSTALLATION section of these safeguards.

1 KEEP UNIT WELL AWAY FROM WATER OR

MOISTURE, such as vases, sinks, tubs, etc.

2 IF EXPOSED TO RAIN, MOISTURE, OR STRONG

IMPACT, unplug unit and have it inspected by a qualified

service technician before use.

3 ELECTRICAL STORMS

During a lightning storm, or before leaving unit unused for

extended periods of time, disconnect all equipment from the

power source as well as the antenna and cable system.

4 WHEN UNIT IS PLUGGED IN

• DO NOT OPERATE IF:

- liquid has spilled into unit.

- unit was dropped or otherwise damaged.

- unit emits smoke, malodors, or noises.

Immediately unplug unit, and have it inspected by a service

technician to avoid potential fire and shock hazards.

• Never drop or push any object through openings in unit.

Touching internal parts may cause electric shock or fire hazard.

• Keep magnetic objects, such as speakers, away from unit

to avoid electrical interference.

5 USING ACCESSORIES

Use only accessories recommended by the manufacturer to

avoid risk of fire, shock, or other hazards.

6 CLEANING UNIT

Unplug unit. Use a clean, dry, chemically untreated cloth to gently

remove dust or debris. DO NOT USE cleaning fluids, aerosols, or

forced air that could over-spray, or seep into unit and cause

electrical shock. Any substance, such as wax, adhesive tape, etc.

may mar the cabinet surface. Exposure to greasy, humid, or dusty

areas may adversely affect internal parts.

READ AND RETAIN ALL SAFETY AND

OPERATING INSTRUCTIONS. HEED ALL

WARNINGS IN THE MANUAL AND ON UNIT

SERVICE

1 DO NOT SERVICE PRODUCT YOURSELF

If, after carefully following detailed operating instructions, the

unit does not operate properly, do not attempt to open or

remove covers, or make any adjustments not described in the

manual. Unplug unit and contact a qualified service technician.

2 REPLACEMENT OF PARTS

Make sure the service technician uses only parts specified

by the manufacturer, or have equal safety characteristics as

original parts. The use of unauthorized substitutes may

result in fire, electric shock, or other hazards.

3 SAFETY CHECK AFTER SERVICING

After unit is serviced or repaired, request that a through safety

check be done as described in the manufacturer’s service

literature to insure video unit is in safe operating condition.

OUTDOOR ANTENNA INSTALLATION

1 SAFE ANTENNA AND CABLE CONNECTION

An outside antenna or cable system must be properly

grounded to provide some protection

against built up static charges

and voltage. Section 810 of

the National Electrical Code,

ANSI/NFPA 70 (in Canada,

part 1 of the Canadian

Electrical Code) provides

information regarding proper

grounding of the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna discharge unit,

connection to grounding electrodes, and requirements for

the grounding electrode.

2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE

POWER LINES OR CIRCUITS

Locate an outside antenna system well away from power

lines and electric light or power circuits so it will never touch

these power sources should it ever fall. When installing

antenna, absolutely never touch power lines, circuits or

other power sources as this could be fatal.

GROUND

CLAMP

ELECTRIC

SERVICE

EQUIPMENT

ANTENNA LEAD

IN WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE

GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC - NATIONAL

ELECTRICAL CODE

LSQT0516A_01p09+1.p65 11/13/2001, 11:39 AM2

Safety Precautions/Mesures de sécurité

Warning : To prevent fire or shock hazard, do not expose this equipment to rain or moisture.

Caution : To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Avertissement : Afin de prévenir tout risque d’incendie ou de chocs électriques, ne

pas exposer cet appareil à la pluie ou à une humidité excessive.

Attention :Pour éviter les chocs électriques, introduire la lame la plus large de la fiche

dans la borne correspondante de la prise et pousser jusqu’au fond.

This video recorder, equipped with the HQ (High Quality) System, is compatible with

existing VHS equipment. Only use those tapes with the mark. It is recommended that

only cassette tapes that have been tested and inspected for use in 2, 4, 6, and 8 hour

VCR machines be used. This television receiver provides display of television closed

captioning in accordance with §15.119 of the FCC rules.

FCC WARNING : Any unauthorized changes or modifications to this

equipment would void the user’s authority to operate.

This symbol warns the user that uninsulated voltage within the unit may

have sufficient magnitude to cause electric shock. Therefore, it is

dangerous to make any kind of contact with any inside part of this unit.

This symbol alerts the user that important literature concerning the

operation and maintenance of this unit has been included.

Therefore, it should be read carefully in order to avoid any problems.

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS

INSIDE REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

Congratulations

on your purchase of one of the most sophisticated

and reliable products on the market today. Used

properly, it will bring you and your family years of

enjoyment. Please fill in the information below.

The serial number is on the tag located on the

back of your unit.

Date of Purchase

Dealer Purchased From

Dealer Address

Dealer Phone No.

Model No.

Serial No.

Batteries

2 “AA”

Accessories

To order accessories,

call toll free 1-800-332-5368.

Remote Control

LSSQ0281

(PV-C1322/PV-C1342)

LSSQ0282

(PV-C1332W/PV-C1352W)

Loading the Batteries

Battery replacement caution

• Do not mix old and new batteries.

• Do not mix alkaline with manganese batteries.

Prevent Accidental Tape Erasure

Break off the tab to

prevent recording.

Record

Tab Screwdriver

To record again.

Cover the hole

with cellophane tape.

TAP E POSITIO N

COUNTER

RESET

SPEEDFM/TV

CM/ZEROPAUSE/SLOW

ACTIO N PROG

TRACK ING

R-TUNE

DISPLAY

MUTE

REC

POWER

1 2 3

4 5 6

7 8 9

100

VOLVOL

C H

PLAYSTOP FF/REW/

EJECT NITE SLEEP

SELECT

ADD/DLT

This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead.

Disposal of these materials may be regulated in your community due to environmental

considerations. For disposal or recycling information please contact your local authorities, or the

Electronics Industries Alliance: <http://www.eiae.org.>

LSQT0516A_01p09+1.p65 11/13/2001, 11:39 AM3

Produktspecifikationer

Varumärke:	Panasonic
Kategori:	Tv
Modell:	PV-C1332W

Behöver du hjälp?

Om du behöver hjälp med Panasonic PV-C1332W ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Tv Panasonic Manualer

Panasonic TH-50CS610A Bruksanvisning

26 Oktober 2024

Panasonic TX-65HZ2000B Bruksanvisning

24 Oktober 2024

Panasonic TX-65FX700B Bruksanvisning

24 Oktober 2024

Panasonic TX-40HX820E Bruksanvisning

24 Oktober 2024

Panasonic TX-65JZT1506 Bruksanvisning

24 Oktober 2024

Panasonic TX-40JX820E Bruksanvisning

24 Oktober 2024

Panasonic Viera TX-L39E6B Bruksanvisning

23 Oktober 2024

Panasonic Viera TX-L37G20E Bruksanvisning

2 Oktober 2024

Panasonic TV-40S55AEY Bruksanvisning

27 September 2024

Panasonic TX-32MST606 Bruksanvisning

27 September 2024

Tv Manualer

Nyaste Tv Manualer

Finlux 48FFA4110 Bruksanvisning

27 Oktober 2024

Continental Edison CELED55120B2 Bruksanvisning

27 Oktober 2024

Sylvania 6620LDF Bruksanvisning

27 Oktober 2024

Bang And Olufsen Beovision 7-55 Bruksanvisning

27 Oktober 2024

Finlux CT1412T DVD Bruksanvisning

27 Oktober 2024

Xoro HTC 2240 HD Bruksanvisning

27 Oktober 2024

Sharp LC-32LX705 Bruksanvisning

27 Oktober 2024

Sharp 65BJ5K Bruksanvisning

27 Oktober 2024

Daitsu DL32 Bruksanvisning

27 Oktober 2024

Nevir NVR-7200-19SD-B Bruksanvisning

27 Oktober 2024