Panasonic VV-1302 Bruksanvisning

Panasonic Tv VV-1302

Läs nedan 📖 manual på svenska för Panasonic VV-1302 (40 sidor) i kategorin Tv. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/40

Please read these instructions carefully before attempting to connect,

operate, or adjust this product. Please save this manual.

Spanish Quick Use Guide is included.

(Guía para rápida consulta en español está incluida.)

Combination VCR

Operating Instructions

Model No . V -1302/V -2002V V

LSQT A0602

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com

Basic Operation

Initial Setup TV Operation

Timer Operation

Advanced Operation

For Your Information

• Initial Setup and Connection Procedures are on pages 8 and 9.

As an ENERGY STAR

Partner,

Matsushita Electric Corporation of America has

determined that this product or product model meets

the ENERGY STAR

guidelines for energy efficiency.

LSQT0519_01p09+1.p65 11/12/2001, 9:13 AM1

2For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com

Important Safeguards and Precautions

INSTALLATION

1 POWER SOURCE CAUTION

Operate only from power source indicated on unit

or in this manual. If uncertain, have your Electric

Utility Service Company or Video Products Dealer

verify your home power source.

2 POWER CORD PLUG

For safety, this unit has a polarized type plug (one

wide blade), or a three-wire grounding type plug.

Always hold the plug firmly and make sure your

hands are dry when plugging in or unplugging the

AC power cord. Regularly remove dust, dirt, etc.

on the plug.

POLARIZED PLUG CAUTION:

The plug fits into outlet one way. If it cannot be fully

inserted, try reversing it. If it still will not fit, have an

electrician install the proper wall outlet. Do not

tamper with the plug.

GROUNDING PLUG CAUTION:

The plug requires a three-hole grounding outlet.

If necessary, have an electrician install the proper

outlet. Do not tamper with the plug.

3 POWER CORD

To avoid unit malfunction, and to protect against

electrical shock, fire or personal injury:

-Keep power cord away from heating appliances

and walking traffic. Do not rest heavy objects on,

or roll such objects over the power cord.

-Do not tamper with the cord in any way.

-An extension cord should have the same type

plug (polarized or grounding) and must be

securely connected.

-Overloaded wall outlets or extension cords is a

fire hazard.

-Frayed cords, damaged plugs, and damaged or

cracked wire insulation are hazardous and

should be replaced by a qualified electrician.

4 DO NOT BLOCK VENTILATION HOLES

Ventilation openings in the cabinet release heat

generated during operation. If blocked, heat

build-up may result in a fire hazard or heat

damage to cassettes.

For your protection:

a. Never cover ventilation slots while unit is ON,

or operate unit while placed on a bed, sofa,

rug, or other soft surface.

b. Avoid built-in installation, such as a book case

or rack, unless properly ventilated.

AVOID EXTREMELY HOT LOCATIONS OR

SUDDEN TEMPERATURE CHANGES

Do not place unit over or near a heater or

regulator, in direct sunlight, etc. If unit is suddenly

moved from a cold place to a warm place,

moisture may condense in unit and on the tape

causing damage.

6 TO AVOID PERSONAL INJURY

• Never place unit on support or

stand that is not firm, level,

and adequately strong.

The unit could fall causing

serious injury to a child or

adult and damage to the unit.

• Move any appliance and cart

combination with care. Quick

stops, excessive force, and uneven

surfaces may cause objects to overturn.

• Carefully follow all operating instructions.

USING THE UNIT

Before unit is brought out of storage or moved to a new location,

refer again to the INSTALLATION section of these safeguards.

1 KEEP UNIT WELL AWAY FROM WATER OR

MOISTURE, such as vases, sinks, tubs, etc.

2 IF EXPOSED TO RAIN, MOISTURE, OR STRONG

IMPACT, unplug unit and have it inspected by a qualified

service technician before use.

3 ELECTRICAL STORMS

During a lightning storm, or before leaving unit unused for

extended periods of time, disconnect all equipment from the

power source as well as the antenna and cable system.

4 WHEN UNIT IS PLUGGED IN

• DO NOT OPERATE IF:

- liquid has spilled into unit.

- unit was dropped or otherwise damaged.

- unit emits smoke, malodors, or noises.

Immediately unplug unit, and have it inspected by a service

technician to avoid potential fire and shock hazards.

• Never drop or push any object through openings in unit.

Touching internal parts may cause electric shock or fire hazard.

• Keep magnetic objects, such as speakers, away from unit

to avoid electrical interference.

5 USING ACCESSORIES

Use only accessories recommended by the manufacturer to

avoid risk of fire, shock, or other hazards.

6 CLEANING UNIT

Unplug unit. Use a clean, dry, chemically untreated cloth to gently

remove dust or debris. DO NOT USE cleaning fluids, aerosols, or

forced air that could over-spray, or seep into unit and cause

electrical shock. Any substance, such as wax, adhesive tape, etc.

may mar the cabinet surface. Exposure to greasy, humid, or dusty

areas may adversely affect internal parts.

READ AND RETAIN ALL SAFETY AND

OPERATING INSTRUCTIONS. HEED ALL

WARNINGS IN THE MANUAL AND ON UNIT

SERVICE

1 DO NOT SERVICE PRODUCT YOURSELF

If, after carefully following detailed operating instructions, the

unit does not operate properly, do not attempt to open or

remove covers, or make any adjustments not described in the

manual. Unplug unit and contact a qualified service technician.

2 REPLACEMENT OF PARTS

Make sure the service technician uses only parts specified

by the manufacturer, or have equal safety characteristics as

original parts. The use of unauthorized substitutes may

result in fire, electric shock, or other hazards.

3 SAFETY CHECK AFTER SERVICING

After unit is serviced or repaired, request that a through safety

check be done as described in the manufacturer’s service

literature to insure video unit is in safe operating condition.

OUTDOOR ANTENNA INSTALLATION

1 SAFE ANTENNA AND CABLE CONNECTION

An outside antenna or cable system must be properly

grounded to provide some protection

against built up static charges

and voltage. Section 810 of

the National Electrical Code,

ANSI/NFPA 70 (in Canada,

part 1 of the Canadian

Electrical Code) provides

information regarding proper

grounding of the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna discharge unit,

connection to grounding electrodes, and requirements for

the grounding electrode.

2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE

POWER LINES OR CIRCUITS

Locate an outside antenna system well away from power

lines and electric light or power circuits so it will never touch

these power sources should it ever fall. When installing

antenna, absolutely never touch power lines, circuits or

other power sources as this could be fatal.

GROUND

CLAMP

ELECTRIC

SERVICE

EQUIPMENT

ANTENNA LEAD

IN WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE

GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC - NATIONAL

ELECTRICAL CODE

LSQT0519_01p09+1.p65 11/12/2001, 8:40 AM2

Safety Precautions/Mesures de sécurité

Warning : To prevent fire or shock hazard, do not expose this equipment to rain or moisture.

Caution : To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Avertissement : Afin de prévenir tout risque d’incendie ou de chocs électriques, ne

pas exposer cet appareil à la pluie ou à une humidité excessive.

Attention :Pour éviter les chocs électriques, introduire la lame la plus large de la fiche

dans la borne correspondante de la prise et pousser jusqu’au fond.

This video recorder, equipped with the HQ (High Quality) System, is compatible with

existing VHS equipment. Only use those tapes with the mark. It is recommended that

only cassette tapes that have been tested and inspected for use in 2, 4, 6, and 8 hour

VCR machines be used. This television receiver provides display of television closed

captioning in accordance with §15.119 of the FCC rules.

FCC WARNING : Any unauthorized changes or modifications to this

equipment would void the user’s authority to operate.

This symbol warns the user that uninsulated voltage within the unit may

have sufficient magnitude to cause electric shock. Therefore, it is

dangerous to make any kind of contact with any inside part of this unit.

This symbol alerts the user that important literature concerning the

operation and maintenance of this unit has been included.

Therefore, it should be read carefully in order to avoid any problems.

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS

INSIDE REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

Congratulations

on your purchase of one of the most sophisticated

and reliable products on the market today. Used

properly, it will bring you and your family years of

enjoyment. Please fill in the information below.

The serial number is on the tag located on the

back of your unit.

Date of Purchase

Dealer Purchased From

Dealer Address

Dealer Phone No.

Model No.

Serial No.

Batteries

2 “AA”

Accessories

To order accessories,

call toll free 1-800-332-5368.

Remote Control

LSSQ0283

Loading the Batteries

Battery replacement caution

• Do not mix old and new batteries.

• Do not mix alkaline with manganese batteries.

Prevent Accidental Tape Erasure

Break off the tab to

prevent recording.

Record

Tab Screwdriver

To record again.

Cover the hole

with cellophane tape.

This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead.

Disposal of these materials may be regulated in your community due to environmental

considerations. For disposal or recycling information please contact your local authorities, or the

Electronics Industries Alliance: <http://www.eiae.org.>

LSQT0519_01p09+1.p65 11/12/2001, 8:40 AM3

Produktspecifikationer

Varumärke:	Panasonic
Kategori:	Tv
Modell:	VV-1302
Färg på produkten:	Wit
LED-indikatorer:	Ja
Batterikapacitet:	2000 mAh
Skärm diagonal:	4.3 "
Frekvensband:	2.4 - 2.483 GHz
Typ av strömkälla:	AC, Battery
LED-typ:	IR
Batteri/Batterispänning:	3.8 V
Inbyggda högtalare:	Ja
Volymkontroll:	Knoppen
Display, antal färger:	16.78 miljoen kleuren
Bildsensortyp:	CMOS
Gränssnitt:	Wi-Fi
Inbyggd mikrofon:	Ja
Nattläge:	Ja
Maximal räckvidd:	- m
Stroomverbruik:	600 mA
Kameraupplösning:	2 MP
Antal kanaler:	8 kanalen
Antal LED-belysning:	8
Ljusstyrka kontroll:	Ja
AC-ingångsspänning:	100-240 V
AC-ingångsfrekvens:	50/60 Hz
Drifttemperatur (TT):	5 - 45 °C
Batteriteknik:	Lithium-Ion (Li-Ion)
Temperatursensor:	Ja