PCE Instruments PCE-CS 1000N Bruksanvisning
PCE Instruments
Vågen
PCE-CS 1000N
Läs nedan 📖 manual på svenska för PCE Instruments PCE-CS 1000N (15 sidor) i kategorin Vågen. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/15
Force Gauge
PCE-CS 1000 N
Version 1.0
26.08.2014
PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
FL-33458
USA
From outside US: +1
Tel: (561) 320-9162
Fax: (561) 320-9176
info@pce-americas.com
www.pce-instruments.com/english
www.pce-instruments.com
PCE Instruments UK Ltd.
Units 12/13
Southpoint Business Park
Ensign way
Hampshire / Southampton
United Kingdom, SO31 4RF
From outside UK: +44
Tel: (0) 2380 98703 0
Fax: (0) 2380 98703 9
info@pce-instruments.com
Manual
OPERATING INSTRUCTIONS
2
Table of contents
1 Introduction 3 ...............................................................................................................
2 Safety precautions 3 .....................................................................................................
3 Specifications ............................................................................................................ 6
3.1 Delivery content and assembly 7 ............................................................................................................
4 Equipment description ............................................................................................... 7
4.1 Measuring equipment .......................................................................................................................... 7
4.2 Remote control .................................................................................................................................... 8
5 Operating Instructions ............................................................................................... 9
5.1 Switching on / off ................................................................................................................................. 9
5.2 Zero .................................................................................................................................................... 9
5.3 Tare .................................................................................................................................................... 9
5.4 Save value .......................................................................................................................................... 9
5.5 Change measuring unit ........................................................................................................................ 9
6 Equipments settings ................................................................................................ 10
6.1 “oFF” Set automatic switch-off ............................................................................................................10
6.2 “br 3” Set background lighting .............................................................................................................10
6.3 “IdL” Lighting duration” ........................................................................................................................10
7 Troubleshooting ......................................................................................................10
8 Custom settings .......................................................................................................11
8.1 Equipment conguration .....................................................................................................................11
8.1.1 Change resolution .............................................................................................................11
8.1.2 Automatic zero tolerance ...................................................................................................11
8.1.3 manual zero tolerance .......................................................................................................11
8.1.4 zero tracking range tolerance ............................................................................................11
8.1.5 not explained function .......................................................................................................11
8.1.6 Zero setting .......................................................................................................................11
8.1.7 Setting measuring interval .................................................................................................12
8.1.8 Setting dynamic weighing ..................................................................................................12
8.1.9 Setting gravity ...................................................................................................................12
8.1.10 Setting user unit ................................................................................................................12
8.2 Calibration ..........................................................................................................................................13
8.2.1 Calibration gravity .............................................................................................................13
8.2.2 Max. Capacity ...................................................................................................................13
8.2.3 Linear calibration ...............................................................................................................14
9 Disposal .................................................................................................................. 15
OPERATING INSTRUCTIONS
3
1 Introduction
The crane scale carries out internal weight checks. The crane scales power is supplied via the 3 x AA
batteries, which have an operating time of up to 65 hours. The crane scale has a maximum load range of
1.000kg. A hook, shackle and a remote control are included in the delivery content. a
2 Safety precautions
Before installing and putting this equipment into operation, please read the operating instructions
through carefully. We are not liable for damages that occur due to non observance of the
operating instructions.
If the equipment is not used for a long period of time, then remove the batteries.
In order to prevent potential hazardous situations when using this measuring equipment, it is vital
to adhere to the safety precautions provided by the manufacturer.
Do not expose the equipment to extreme temperatures direct sunlight, extreme humidity or ,
moisture
Never use the measuring equipment with wet hands.
It is not permitted to carry out any technical changes on the equipment.
The equipment should only be cleaned with a damp cloth. Do not use abrasive cleaners or
detergents which contain solvents.
The equipment must only be used with accessories oered by PCE Germany or with
replacements of equal value.
The environmental conditions, for example the temperature ranges in which the measuring
equipment can be used, as stipulated in the operating instructions specications, must always be
adhered to. Otherwise the operation of the equipment is prohibited.
The measuring equipment is not to be used in an environment where there is a danger of
explosion.
Do not measure more than a ton.
In order to prevent potential hazardous situations when using heavy-lifting equipment, it is vital
the manufacturer and the operator adhere to certain requirements When using the measuring
.
equipment, no risk must be posed to the operator.
The operator or the person responsible for operating the measuring equipment must adhere to
the national regulations for example health and safety at work regulations or any other
governmental safety standards.
There are also other safety precautions to be taken into consideration when operating the
equipment, for example precautions provided by the crane, lifting device or shackle manufacturer
etc.
The assembly, the commissioning and the servicing of the measuring equipment must only be
carried out by properly trained personnel who have been provided with the appropriate protective
equipment.
The measuring equipment must not be altered and is only allowed to be used for the intended
purpose.
The measuring equipment as well as any other equipment (for example the crane or any other
heavy-lifting equipment) must be regularly serviced and maintained and where necessary have
the service history correctly logged or certied. Each time before using the equipment a visual
check must be carried out. In the case of any discrepancies for example cracks, breaks or
deformities, the equipment must be immediately disabled and declared unt for use. This must
also be reported where necessary to the person in your company who is responsible for health
and safety.
Repairs must only be carried out by trained service personnel and only approved replacement
parts must be used when carrying out a repair. All repairs, servicing and replacement parts must
be documented by the service department
The operating instructions as well as the safety instructions must always be visible whilst using
the measuring equipment.
The measuring equipment is not explosion-proof and must not be used in an environment
where there is a danger of explosion. The environmental conditions, for example the temperature
Produktspecifikationer
| Varumärke: | PCE Instruments |
| Kategori: | Vågen |
| Modell: | PCE-CS 1000N |
Behöver du hjälp?
Om du behöver hjälp med PCE Instruments PCE-CS 1000N ställ en fråga nedan och andra användare kommer att svara dig
Vågen PCE Instruments Manualer
23 Oktober 2024
23 Oktober 2024
22 Oktober 2024
22 Oktober 2024
22 Oktober 2024
22 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Vågen Manualer
- Vågen Xiaomi
- Vågen AEG
- Vågen Huawei
- Vågen Garmin
- Vågen Grundig
- Vågen Inventum
- Vågen Karcher
- Vågen Tefal
- Vågen Ade
- Vågen Adler
- Vågen Archos
- Vågen ACME
- Vågen Orbegozo
- Vågen Techwood
- Vågen Fagor
- Vågen Telefunken
- Vågen Gorenje
- Vågen Silvercrest
- Vågen Nedis
- Vågen Korona
- Vågen Saturn
- Vågen Black And Decker
- Vågen Innoliving
- Vågen Tristar
- Vågen Trisa
- Vågen Pyle
- Vågen Rowenta
- Vågen Maestro
- Vågen Taylor
- Vågen Livoo
- Vågen OBH Nordica
- Vågen Manta
- Vågen Beurer
- Vågen OK
- Vågen Hyundai
- Vågen Vox
- Vågen ECG
- Vågen Sinbo
- Vågen Jata
- Vågen Melissa
- Vågen Emerio
- Vågen Scarlett
- Vågen Clatronic
- Vågen Sencor
- Vågen Lanaform
- Vågen Conair
- Vågen Blaupunkt
- Vågen Concept
- Vågen Solac
- Vågen Medisana
- Vågen EMOS
- Vågen Mesko
- Vågen Gemini
- Vågen Beper
- Vågen Omron
- Vågen Genie
- Vågen Mellerware
- Vågen Termozeta
- Vågen Vitek
- Vågen Eldom
- Vågen Hama
- Vågen Maxxmee
- Vågen Voltcraft
- Vågen Terraillon
- Vågen Marquant
- Vågen Steren
- Vågen Haeger
- Vågen Perel
- Vågen Tanita
- Vågen GOTIE
- Vågen Polar
- Vågen Fitbit
- Vågen SBS
- Vågen Soehnle
- Vågen Sanitas
- Vågen Maxwell
- Vågen Zelmer
- Vågen ETA
- Vågen Exacta
- Vågen Bomann
- Vågen Proficare
- Vågen Continental Edison
- Vågen Ufesa
- Vågen Salter
- Vågen Maul
- Vågen Laica
- Vågen Camry
- Vågen Kayoba
- Vågen Imetec
- Vågen Sammic
- Vågen Lümme
- Vågen TFA
- Vågen AWS
- Vågen Konig
- Vågen Active Era
- Vågen Becken
- Vågen Tesla
- Vågen Mx Onda
- Vågen Essentiel B
- Vågen IHealth
- Vågen Withings
- Vågen Team
- Vågen Gallet
- Vågen Xavax
- Vågen Nevir
- Vågen XD Enjoy
- Vågen Basetech
- Vågen Etekcity
- Vågen Balance
- Vågen Steinberg
- Vågen AENO
- Vågen Mitsukota
- Vågen Optimum
- Vågen Medel
- Vågen Truelife
- Vågen Kalorik
- Vågen Mercury
- Vågen Mia
- Vågen Wiso
- Vågen Redmond
- Vågen Levita
- Vågen Silvergear
- Vågen Duronic
- Vågen TFA Dostmann
- Vågen American Weigh Scales
- Vågen Emga
- Vågen Kern
- Vågen Lenoxx
- Vågen LERAN
- Vågen Prixton
- Vågen Sana
- Vågen Media-tech
- Vågen Louis Tellier
- Vågen Cardinal Detecto
- Vågen LAFE
- Vågen Brecknell
- Vågen KoreHealth
- Vågen Create
- Vågen Ideen Welt
- Vågen Seca
- Vågen Little Balance
- Vågen Gima
- Vågen DPM
- Vågen Inotec
- Vågen Maman
- Vågen Avery Berkel
- Vågen Thinner
- Vågen Picooc
- Vågen Oromed
- Vågen A&D
- Vågen Robi
- Vågen Mybeo
- Vågen Mebby
- Vågen Yamazen
Nyaste Vågen Manualer
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
26 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
21 Oktober 2024
21 Oktober 2024
20 Oktober 2024