Peerless DS-MBY947L-2X1 Bruksanvisning

Peerless Platt panelstöd DS-MBY947L-2X1

Läs nedan 📖 manual på svenska för Peerless DS-MBY947L-2X1 (16 sidor) i kategorin Platt panelstöd. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/16
12014-05-01 #:126-9001-1
DS-MBY942L-2X1 DS-MBY947L-2X1
ENG
200 lb
(91 kg)
MAX 200 lb
(91 kg)
MAX
40" - 42"
(102 - 107 cm) 46" - 48"
(117 - 122 cm)
22014-05-01 #:126-9001-1
This page intentionally left blank
ENG
32014-05-01 #:126-9001-1
ENG - This product is designed to be installed on wood joist/beam or solid concrete ceilings. Hardware is
included for wood joist/beam and solid concrete installation. Before installing make sure the supporting surface
will support the combined load of the equipment and hardware. Screws must be tightly secured. Do not
overtighten screws or damage can occur and product may fail. Never exceed the Maximum Load Capacity.
Always use an assistant or mechanical lifting equipment to safely lift and position equipment. This product is
intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury. Be
careful not to pinch ngers when operating the mount. For support please call customer care at 1-800-865-2112.
WARNING
Tools Needed for Assembly.ENG
1
2
ENG To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
+1/2
4
3
7/16"
(11mm)
3/8"
(10mm)
Symbols
ENG
WARNING
ENG
#
Skip to step.
ENG
x3
Screws must get at least three
full turns and t snug.
ENG
Do not overtighten screws.
ENG

Produktspecifikationer

Varumärke: Peerless
Kategori: Platt panelstöd
Modell: DS-MBY947L-2X1

Behöver du hjälp?

Om du behöver hjälp med Peerless DS-MBY947L-2X1 ställ en fråga nedan och andra användare kommer att svara dig




Platt panelstöd Peerless Manualer

Platt panelstöd Manualer

Nyaste Platt panelstöd Manualer