Pelco Evolution EVO-12-SS2-P Bruksanvisning

Pelco övervakningskamera Evolution EVO-12-SS2-P

Läs nedan 📖 manual på svenska för Pelco Evolution EVO-12-SS2-P (24 sidor) i kategorin övervakningskamera. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/24
Evolution Stainless Steel
QUICK START GUIDE
C6641M
2 006-0060-0476 - EVOLUTION STAINLESS STEEL - PELCO - QSG - August 2019 - V2
Important
Specification
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause
undesired operation.
CAN ICES-3(A)/NMB-3(A)
Read these instructions carefully before installing or operating this camera.
This camera should be installed by a qualified service person and the installation should conform to local
and national regulations.
The camera should be installed with the weight in mind, installation via access platform is recommended.
Fixing used should be of appropriate strength and suitable for use around stainless steel.
Chloride from cleaning products will cause the stainless steel to lose chrome content and therefore
corrode.
Chlorine from poorly managed swimming pools can also become Chloride.
This camera is not suitable for installation in a ceiling void that is used as an air handling space.
Certified as FCC Class A. In a domestic environment this camera may cause radio interference in which
case the user should take adequate measures.
Placing this enclosure on or near ferrous material will cause the product to become stained and to collect
corrosion over time.
For best results the stainless steel should be cleaned regularly with a lint free cloth and
sunflower oil or equivalent. Care should be taken not to get the oil on the dome.
DANGER: RISK OF EXPLOSION IF REPLACING A BATTERY WITH AN INCORRECT BATTERY TYPE.
EVO-12-SS2-P
Resolution 12MP
Power Input
12 VDC, 1.0 A (min) LPS, NEC Class 2 power supply
Power over Ethernet (PoE), IEEE standard 802.3af
Ratings IP66, IP67, IP68 (2m 30min), IP69K, NEMA 4X, 6P, IK10+
Operating
Temperature -40°C to 5C (-40 °F to +131°F)
Enclosure Electropolished marine grade 316 stainless steel with polymer bubble
Weight 5.11 kg (11.27 lbs)
Please ensure you have the correct mounting accessories and fittings
before proceeding with your installation.
3 006-0060-0476 - EVOLUTION STAINLESS STEEL - PELCO - QSG - August 2019 - V2
1. Contents
1. Contents 3
2. Box Contents 3
3. Disassemble the Camera Enclosure 4
4. Mounting Options 5
5. Surface Mounting 6
6. Surface Mount with Conduit Adaptor 9
7. Pendant Mount Adaptor 14
8. Environmental Shield 14
9. Attach to Pendant 15
10. Start-up 19
11. Cleaning and Maintenance 22
2. Box Contents
A. E.Dome Cover Cable Tie
B. Camera Module F. Driver and Bit
C. G.Rear Enclosure Security Locking Tool
D. Mounting Plate SpannerH.
G.
A. B.
C.
D.
F.
The Evolution Stainless Steel Camera is designed for installations on flat surfaces,
pendants or corners. Conduit Adaptor, Pendant Adaptor, Pole and Corner Mount
accessories, and Pendant Arm are sold separately.
Make a note of the camera’s MAC address
and installation location. Find the MAC address
printed on the camera label.
E.
H.

Produktspecifikationer

Varumärke: Pelco
Kategori: övervakningskamera
Modell: Evolution EVO-12-SS2-P

Behöver du hjälp?

Om du behöver hjälp med Pelco Evolution EVO-12-SS2-P ställ en fråga nedan och andra användare kommer att svara dig




övervakningskamera Pelco Manualer

övervakningskamera Manualer

Nyaste övervakningskamera Manualer