Pioneer CA-HR-REN-EVO.001 Bruksanvisning

Pioneer Inte kategoriserad CA-HR-REN-EVO.001

Läs nedan 📖 manual på svenska för Pioneer CA-HR-REN-EVO.001 (3 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/3
Installation manual CA-HR-REN-EVO.001 | Version 2.0
Remove the front panel using a trim tool
Hazard Switch covers Manual airco cover
Interface
Installation brackets Fascia
Automatic airco cover Pre-facelift vent holder
Remove the original clips (marked with red circles)
and screw retainers (marked with yellow triangles),
afterwards re-install on the new fascia
Remove the four indicated screws and take out the OEM receiver
Choose the correct airco panel and click it onto the main fascia,
mount airco unit
1 2
43
CA-HR-REN-EVO.001
INSTALLATION KIT FOR SPH-EVO62DAB-CLIO
Manual airco
Automatic airco
Installation manual CA-HR-REN-EVO.001 | Version 2.0
Re-install the vents (if you have a pre-facelift vehicle:
use the two metal tabs to support the vents)
+ the supplied vent holder
Slide the unit brackets and put two screws on each side
Mount the side brackets onto the screen and fix four screws
Finalise with the two top screws on top
and click the unit cable into the screen
5 6
87
Install power cable + test PDC
In order to prevent ESD damage the W/R jack must be
connected before any connection to the car side
9
1
2
To Wired Radio Remote socket (W/R)
To parking signal (green wire on Pioneer power cable)
To car antenna connector
Optional reverse camera connection for CA-BC-6V.001
To Pioneer ISO power connector
To car main connector
To reverse signal (purple wire on Pioneer power cable)
To Pioneer FM/AM antenna input
ACC power connector (verify pinout of OEM connector)
Connect for cars with voice command button
on the steering wheel
1
4
4
7
7
2
5
58
8
3
39
10
9
6
6
10
Installation manual CA-HR-REN-EVO.001 | Version 2.0
Final connector image after buzzer installation After making all the connections, install the unit
and secure with the four original screws
(Proposed optional buzzer location marked in red)
View of the final connector
Yellow and black mute cable (next to green)To Radio Mute (yellow wire on Pioneer RCA lead)
Black buzzer cable (below green)To steering wheel interface connector (see location in next step)
To steering wheel interface connector (see location in next step)
To steering wheel interface connector (see location in next step)
Red buzzer cable (next to yellow)
Put the fascia into the car and click
the correct hazard switch cover in position
12
11
15
13
Install optional buzzer, only if you have no sound
from parking sensors after previous step
Final product image
10
16
1
2b
2c
2a
2c
2a
2b
1
2a
2b
2c
2a
2b
2c
1 2
Pre-facelift vehicles Facelift vehicles
Facelift vehicles
2

Produktspecifikationer

Varumärke: Pioneer
Kategori: Inte kategoriserad
Modell: CA-HR-REN-EVO.001

Behöver du hjälp?

Om du behöver hjälp med Pioneer CA-HR-REN-EVO.001 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Pioneer Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer