Planet IGT-815AT Bruksanvisning

Planet Inte kategoriserad IGT-815AT

Läs nedan 📖 manual på svenska för Planet IGT-815AT (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/4
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET compact industrial 100/1000X
to 10/100/1000T Media Converter, IGT-815AT. In the following
sections, the term means the “Industrial Media Converter”
IGT-815AT.
Open the box of the Industrial Media Converter and carefully
unpack it. The box should contain the following items:
Industrial Media
Converter x 1
User’s Manual x 1 Wall-mount Kit x 1
DIN-rail Kit RJ45 Dust Cap x 1 SFP Dust Cap x 1
If any of these are missing or damaged, please contact your dealer
immediately; if possible, retain the carton including the original
packing material, and use them again to repack the product in case
there is a need to return it to us for repair.
Power
Consumption
System ON without loading
DC 9V: 0.55W/1.87BTU
DC 12V: 0.54W/1.84BTU
DC 24V: 0.52W/1.77BTU
DC 36V: 0.5W/1.7BTU
DC 48V: 0.52W/1.77BTU
AC 24V: 0.5W/1.7BTU
Full loading
DC 9V: 1.76W/6BTU
DC 12V: 1.77W/6BTU
DC 24V: 1.63W/5.56BTU
DC 36V: 1.65W/5.62BTU
DC 48V: 1.68W/5.73BTU
AC 24V: 2.8W/9.5BTU
DIP Switch
O: LFP (Link Fault Passthrough) disable
On: LFP (Link Fault Passthrough) enable
FEF (Far End Fault) works with LFP to
prevent data loss
The DIP switch is turned o by default.
Enclosure IP30 metal case
Installation DIN-rail kit and wall-mount ear
ESD Protection 6KV DC
3.2 LEDDenition:
System
LED Color Function
PWR Green Lights to indicate the Industrial Media Converter
has power.
Gigabit TP Interface
LED Color Function
TP
LNK/
ACT
Green
Lit: Indicates that the Copper Port is successfully
connecting to the network at 10/100/1000Mbps.
Blinks: Indicates the Copper Port is receiving or
sending data.
1000
LNK/
ACT
Amber
Lit: Indicates that the Copper Port is successfully
connecting to the network at 1000Mbps.
Blinks: Indicates the Copper Port is receiving or
sending data.
O: Indicates the link through that port is
successfully established at 10/100Mbps.
Gigabit Fiber Interface
LED Color Function
Fiber
LNK/
ACT
Green
Lit: Indicates that the ber optic port is
successfully connecting to the network at 100Mbps
or 1000Mbps.
Blinks: Indicates the ber optic port is receiving or
sending data.
3.HardwareIntroduction
3.1 Three-ViewDiagram
The three-view diagram of the Industrial Media Converter consists
of Ethernet interfaces and one removable 2-pin terminal block.
The LED indicators are also located on the front panel.
104.00
30.00
70.00
18.00
9.00
91.00
52.00 52.00
50.00
30.00
21.69
28.65
20.00
28.00
48.80 40.00
18.00
40.00
18.00
Mounting Kit
Mounting Kit
DIN-Rail Kit
Unit: mm
Rear ViewSide View Side View
Top View
Front View
Bottom View
1 2
PWR
LFP
100/1000X
ONOFF
LNK/ACT
LNK/
ACT
1000
V+
PWR
DC I npu t: 9 -48V
, 0 .5A max.
AC Inpu t: 2 4V
, 0 .2A max.
Figure1: IGT-815AT Three-View Diagram
2.ProductSpecications
Model IGT-815AT
Hardware Specications
Copper Port
10/100/1000BASE-T Ethernet TP interface.
Maximum 100m distance.
Auto-negotiation, auto MDI/MDI-X
SFP Port 1000BASE-SX/LX/BX SFP interface
Compatible with 100BASE-FX SFP
Flow Control Back pressure for half duplex mode
IEEE 802.3x pause frame for full duplex mode
Maximum Frame
Size 9K
LED
System: Power (green)
Fiber 100/1000BASE-X: LNK/ACT (green)
TP 10/100/1000BASE-T: LNK/ACT (green),
1000 LNK/ACT (amber)
Dimensions
(W x D x H) 30 x 70 x 104 mm
Weight 221g
Power
Requirements
DC 9~48V, supports reverse polarity protection
AC 24V
Cables
10/100/1000BASE-T:
2-pair UTP Cat. 3, 4, 5, 5e, 6
(maximum 100 meters)
EIA/TIA-568 100-ohm STP
(maximum 100 meters)
100BASE-FX/1000BASE-SX/LX:
Multi-mode: 50/125μm or 62.5/125μm
optical ber
Single-mode: 9/125μm optical ber
Standards Conformance
Regulatory
Compliance FCC Part 15 Class A, CE
Protocols and
Standards
Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet over Fiber Optic
IEEE 802.3x Flow Control
IEEE 802.3az Energy Ecient Ethernet (EEE)
Stability Testing
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Environment
Temperature Operating: -40~75 degrees C
Storage: -40~85 degrees C
Humidity Operating: 5~90% (non-condensing)
Storage: 5~90% (non-condensing)
Front View
PWR
LFP
100/1000X
ONOFF
LNK/ACT
LNK/
ACT
1000
Figure2: IGT-815AT Front View
3.3 WiringthePowerInputs
The 2-contact terminal block connector on the top panel of
Industrial Media Converter is used for 9~48V DC power inputs or
24V AC power inputs. Please follow the steps below to insert the
power wire.
When performing any of the procedures like inserting
the wires or tightening the wire-clamp screws, make
sure the power is OFF to prevent from getting an
electric shock.
1. Insert positive and negative DC power wires into contacts 1 and
2 for POWER.
V+
PWR
DC Input: 9-48V
, 0.5A max.
AC Input: 24V
, 0.2A max.
1 2
- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
2. Tighten the wire-clamp screws for preventing the wires from
loosening.
1 2
Power
+ -
Note
1. The wire gauge for the terminal block should be in
the range between 12 and 24 AWG.
2. The DC power input range is 9V ~ 48V DC or 24V
AC.
4.3 SideWall-mountPlateMounting
Caution
You must use the screws supplied with the wall-
mounting brackets. Damage caused to the parts by
using incorrect screws would invalidate your warranty.
4.4 GroundingtheDevice
User MUST complete grounding wired with the device; otherwise,
a sudden lightning could cause fatal damage to the device. EMD
(Lightning) DAMAGE IS NOT COVERED UNDER WARRANTY.
V+
PWR
DC Input: 9-48V
, 0.5A max.
AC Input: 24V
, 0.2A max.
1 2
Earth Ground
4.HardwareInstallation
This section describes the functionalities of the Industrial Media
Converter’s components and guides you to installing it on the DIN
rail and wall. Please read this chapter completely before continuing.
Note
This following pictures guide you to installing the
device, and the device is not IGT-815AT.
4.1 DIN-railMountingInstallation
2
1
4.2 Wall-mountPlateMounting
5.FiberandCopperInstallation
The IGT-815AT is exible enough to extend the distance from
220m to 120km. It depends on the 1000BASE-X or 100BASE-FX
SFP transceivers. The SFP transceivers are hot-pluggable and
hot-swappable. You can plug in and out the transceiver to/from
any SFP port without having to power down the Industrial Media
Converter.
DC Power Line (DC)
1000BASE-SX/LX Fiber-optic
1000
1000BASE-T UTP
550m / 20km 100m
DC 9~48V
IGT-815AT
DC
Data
Power
Data
IP Camera
Monitoring
Center
1000
Fiber Switch
6.LinkFaultPassthrough
The LFP function includes Link Loss Carry Forward (LLCF), Link
Loss Return (LLR) and the DIP switch design. LLCF and LLR can
immediately alert administrators about the issue of the link media
and provide ecient solution to monitor the network. The DIP
switch provides the disabling or enabling of the LFP function.
IP Camera
LFP
Enabled
LFP
Enabled
Copper Cable Copper Cable
Monitoring Center
IP Camera
Fiber Cable
LFP
Enabled
LFP
Enabled
Copper Cable Copper Cable
Monitoring Center
Copper Link Broken
1
Copper
Link Down
5
LFP disconnects
Fiber Link
2
LFP disconnects
Copper Link
4
Fiber Link Down
3
1000
1000
Fiber Cable
Remote Link
Broken
Remote Link
Norma l
1000BASE-SX/LX Fiber-optic
1000
1000BASE-T UTP
Note
LFP function is turned off by default. This feature
can also be turned on via the DIP switch. If you are
not familiar with the network installation and for
diagnostic purpose (i.e. check which end is broken),
you can turn it on. Otherwise, please keep it in the
default position.
CustomerSupport
Thank you for purchasing PLANET products. You can browse our
online FAQ resource on PLANET web site rst to check if it could
solve your issue. If you need more support information, please
contact PLANET switch support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq.php
Switch support team mail address:
support_switch@planet.com.tw
Copyright © PLANET Technology Corp. 2021.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.

Produktspecifikationer

Varumärke: Planet
Kategori: Inte kategoriserad
Modell: IGT-815AT

Behöver du hjälp?

Om du behöver hjälp med Planet IGT-815AT ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Planet Manualer

Planet

Planet WRE-1200 Bruksanvisning

17 Oktober 2024
Planet

Planet MGB-LX Bruksanvisning

4 Oktober 2024
Planet

Planet MGB-L120 Bruksanvisning

2 Oktober 2024
Planet

Planet MTB-LB20 Bruksanvisning

30 September 2024
Planet

Planet MFB-TFA40 Bruksanvisning

28 September 2024
Planet

Planet LS100-SMK Bruksanvisning

26 September 2024
Planet

Planet IGS-1000-4UP2X Bruksanvisning

26 September 2024
Planet

Planet NMS-AIoT Bruksanvisning

26 September 2024
Planet

Planet NMS-ST Bruksanvisning

26 September 2024
Planet

Planet LRP-111U-KIT Bruksanvisning

24 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024