Planet IPOE-165 Bruksanvisning

Planet Inte kategoriserad IPOE-165

Läs nedan 📖 manual på svenska för Planet IPOE-165 (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/2
- 2 - - 4 - - 6 - - 8 -
- 1 - - 3 - - 5 - - 7 -
1. Package Contents
Thank you for purchasing PLANET Industrial IP67 1-port 10/100/1000T
802.3at PoE+ Injector, IPOE-165. In the following sections, the term
“Outdoor PoE Injector” means the IPOE-165.
Open the box of the Industrial PoE Injector and carefully unpack it. The
box should contain the following items:
IPOE-165 x 1 User's Manual x 1 M22 Waterproof
Cable Gland x 3
Power Cable with 2-pin
Terminal Block x 1 Wall-mounted Kit x 1 Ground Wire x 1
If any of these are missing or damaged, please contact your dealer
immediately; if possible, retain the carton including the original packing
material, and use them again to repack the product in case there is a
need to return it to us for repair.
2.2 Power Input Port
Figure 2-2 shows the Power Input port side of the IPOE-165
Figure 2-2: IPOE-165 Power Input port side
2.3 Data Input Port and 802.3at PoE+ Output Port
Figure 2-3 shows the Data Input Port and PoE+ Output Port side of the
IPOE-165.
PoE+ Output Port Data Input Port
Figure 2-3: IPOE-165 two RJ45 ports side
Caution
Make sure the clamping nut is tightly attached to the
cable gland body and the sealing insert is squeezed
tightly.
Step 5: Repeat Steps 1 to 4 for “Data” Input Port and“PoE (Data +
Power)” Output Port
3. Installation
This section describes how to install the Outdoor PoE Injector and make
connections to it. Please read the following topics and perform the
procedure in the order being presented.
3.1 Installing Cable Gland with Power Cable and RJ45
UTP Cable
The cable gland consists of the following:
3.2 Connecting Waterproof Cable Kit to the Outdoor
PoE Injector
Step 1: Turn clockwise to tighten the connected to the gland body
Outdoor PoE Injector.
2. Hardware Introduction
This section describes the functionalities of the outdoor PoE Injector’s
components.
2.1 Product Outlook
Unit: mm
PoE-
in-Use
PoE+Data
PWR
DC Input Range:
24-56V , 1.6 A max.
V+
Figure 2-1: IPOE-165 product outlook
2.4 LED Indicators
LED Color Function
PWR Green Indicates it has power.
PoE-in-Use Green Indicates the port is providing 54V DC in-line
power.
To install the 2-pin Terminal Block Connector on the Outdoor PoE
Injector, simply follow the following steps:
Step 1: Insert positive DC power wire into V+, negative DC power wire
into V-, and grounding wire into Ground.
V+
V
-
2-pin
Step 2: Tighten the wire-clamp screws for preventing the wires from
loosening and plug them into the PoE Injector.
Note
1. The wire gauge should be in the range from 20 to 22
AWG.
2. The device must be grounded.
Step 2: Plug the power cable connector into the power input port.
Step 3: sealing insert Insert the into the cable gland body.
Step 4: Attach the clamping nut to the cable gland to complete the
cable assembly.
Note
1. Use only the waterproof cable gland provided in the
package of the IPOE-165.
2. If the above installation procedure is not properly
followed, the warranty will be invalidated.
11.31mm
40.78mm
5.00mm
30.22mm
29.80mm
20.18
13.72
14.00
30.10
3. If the waterproof cable gland is found missing or
damage, please contact your local reseller where you
purchased from.
4. Never use any waterproof cable gland that is not
purchased from PLANET or doesn’t have the same
dimensions of the IPOE-165; it will damage the device
permanently.
3.3 Wall-mount Installation
To install the Outdoor PoE Injector on the wall, please follow the
instructions described below.
Step 1: Find the wall that you want to mount the Outdoor PoE Injector
on.
- 10 - - 12 - - 13 - - 14 -
- 9 - - 11 -
Step 2: Refer to the picture below to screw the four screws on the wall.
140.36mm
59mm
PoE -
in-U se
PoE +Data
PWR
DC Input Ra nge:
24- 56V , 1.6A m ax.
V+
Step 3: Use a screwdriver to screw them into the wall.
3.4 Grounding the Device
Users MUST complete grounding wired with the device; otherwise, a
sudden lightning could cause fatal damage to the device.
Earth Ground
4.ProductSpecications
Product IPOE-165
Hardware Specications
Interface
Input Port 1 x 10/100/1000BASE-T in RJ45 “Data”
port
Output Port
1 x 10/100/1000BASE-T Ethernet with
IEEE 802.3at PoE+
“Data + DC” out RJ45 port
Input Power
Terminal Block
1 x 2-pin terminal block
- Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)
Network Cable
10BASE-T: UTP category 3, 5 cable
(≤100m)
100BASE-TX: UTP category 5,5e cable
(≤100m)
1000BASE-T: UTP category 5e,6
cable(≤100m)
Data Rate 10/100/1000Mbps
LED Indicator PWR (Green)
PoE-in-use x 1 (Green)
Input Voltage 24~56V DC
Power Consumption
Voltage System on Full Load (Max.)
DC 24V 0.72W 43.4W
DC 36V 0.72W 41.04W
DC 54V 1.08W 40.5W
www.PLANET.com.tw
PLANET Technology Corp.
2351-AH8080-000
10F., No. 96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan
Wa i :rn ng
This device is compliant with Class A of CISPR 32.
In a residential environment this device may cause radio interference.
Industrial IP67 1-Port 802.3at PoE+ Injector
►
IPOE-165
Standards Conformance
Regulatory Compliance FCC Part 15 Class A
CE
Stability Testing
IEC 60068-2-32 (Free fall)
IEC 60068-2-27 (Shock)
IEC 60068-2-6 (Vibration)
Standards Conformances
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit
Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Environment
Operating Temperature -40 ~ 75 degrees C
Storage Temperature -40 ~ 85 degrees C
Humidity 5 ~ 95% (non-condensing)
5. Customer Support
Thank you for purchasing PLANET products. You can browse our online
FAQ resource and user’s manual on PLANET web site rst to check if it
could solve your issue. If you need more support information, please
contact PLANET support team.
PLANET online FAQs:
https://www.planet.com.tw/en/support/faq?method=category&c1=2
Support team mail address:
support@planet.com.tw
Copyright © PLANET Technology Corp. 2020.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other
trademarks belong to their respective owners.
Note
EMD (Lightning) DAMAGE IS NOT CONVERED UNDER
WARRANTY.
3.5 Connecting IPOE-165 to PD
Step 1: Connect the additional Cat5e/6 cable from the PoE+ Out of
the IPOE-165 to a remote PD.
DC Power Line (DC)
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
PoE
Power Data PoE IP Camera
IPOE-165
Data
100m
802.3at PoE+
Power Supply
Power
DC
DC24-56V
Etherent Switch
Step 2: The PoE+ Out port is the power injector which transmits DC
voltage to the Cat5e/6 cable and transfer data from the Data
source.
Step 3: Once the IPOE-165 detects the existence of an IEEE 802.3at/
af device or Ethernet device, the LED indicator will be lit LAN
steadily, showing it is providing power.
Note
According to IEEE 802.3at/af standard, the IPOE-165
will not inject power to the cable if not connected to a
standard IEEE 802.3at/af device.
ESD Protection Air 8KV DC
Contact 6KV DC
Surge Protection 6KV
Enclosure IP67-rated and IK10 aluminum metal case
Installation Wall-mount ear
Dimensions (W x D x H)
150 x 43.8 x 72.94 mm
169.85 x 43.8 x 72.94 mm, with cable
gland
Weight 339g
373g (with three waterproof cable glands)
MTBF >100000 hours
Power over Ethernet
PoE Standard
IEEE 802.3at Power over Ethernet Plus/
End-span PSE
Backward compatible with IEEE 802.3af
Power over Ethernet
PoE Power Output 54V DC, max. 30 watts
PoE Power Supply Type End-span
Power Pin Assignment 1/2 (+), 3/6 (-)

Produktspecifikationer

Varumärke: Planet
Kategori: Inte kategoriserad
Modell: IPOE-165

Behöver du hjälp?

Om du behöver hjälp med Planet IPOE-165 ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Planet Manualer

Planet

Planet WRE-1200 Bruksanvisning

17 Oktober 2024
Planet

Planet MGB-LX Bruksanvisning

4 Oktober 2024
Planet

Planet MGB-L120 Bruksanvisning

2 Oktober 2024
Planet

Planet MTB-LB20 Bruksanvisning

30 September 2024
Planet

Planet MFB-TFA40 Bruksanvisning

28 September 2024
Planet

Planet LS100-SMK Bruksanvisning

26 September 2024
Planet

Planet IGS-1000-4UP2X Bruksanvisning

26 September 2024
Planet

Planet NMS-AIoT Bruksanvisning

26 September 2024
Planet

Planet NMS-ST Bruksanvisning

26 September 2024
Planet

Planet LRP-111U-KIT Bruksanvisning

24 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024