Planet PWR-120-48 Bruksanvisning

Planet Inte kategoriserad PWR-120-48

Läs nedan 📖 manual på svenska för Planet PWR-120-48 (3 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/3

- 1 - - 2 - - 3 - - 4 -

DC Single Output Industrial

DIN Rail Power Supply

PWR-40-24 / PWR-60-24

PWR-75-24 / PWR-120-48

PWR-240-48 / PWR-480-48

User's Manual

1. Package Contents

Thanks for purchasing DC Single Output Industrial DIN Rail

Power Supply units from PLANET technology; the DC Single

Output Industrial DIN Rail Power Supply units can transform AC

power into DC power output for PLANET Industrial equipment.

The following models come with the DC Single Output Industrial

DIN Rail Power Supply units:

PWR-40-24 (MEAN WELL / MDR-40-24): l 40W 24V DC

Single Output Industrial DIN Rail Power Supply

(-20 ~ 70 degrees C)

PWR-60-24 l 60W 24V DC (MEAN WELL / MDR-60-24):

Single Output Industrial DIN Rail Power Supply

(-20 ~ 70 degrees C)

PWR-75-24 (MEAN WELL / DR-75-24): l 75W 24V DC

Single Output Industrial DIN Rail Power Supply

(-10 ~ 60 degrees C)

PWR-120-48 (MEAN WELL / DR-120-48): l 120W 48V DC

Single Output Industrial DIN Rail Power Supply

(-10 ~ 60 degrees C)

PWR-240-48 (MEAN WELL / DR-240-48): l 240W 48V DC

2. Requirements

The DC Single Output Industrial DIN Rail Power Supply units

are designed for providing DC power to PLANET Industrial

equipment. For AC power input and DC power output from

DC Single Output Industrial DIN Rail Power Supply units, the

following equipment is necessary for further installation.

AC Power Cord Cable x 1 l

Terminal Block Connector within Two DC Power Inputs Wires l

Cutting Tools: Long Nose Pliers and Pen Knife l

Note

1. Before working on the device, please make

sure power cord has been unplugged from

power outlet.

2. PLANET DIN-Rail power supply series is for

indoor only.

3. PLANET DIN-Rail power supply series must

be earthed.

3. AC Power Cord Cable Installation

The DC Single Output Industrial DIN Rail Power Supply unit

power requirement is 100-240V AC, 50/60Hz with power input

lines. Suggest use standard AC Power Cord Cable.

Step 1: Use pen knife to cut open the AC Power Cord Cable.

Step 2: Open the AC Power Cord Cable and there are 3 lines

inside.

Step 4: Make sure the lines are not disorderly and confused.

Step 5: Please verify the 3 lines, which are live line, null line

and earth line.

Note

The standard AC power cord, live line is black,

null line is white and earth line is green. Please

verify these 3 lines from your AC power cord

before starting the following procedures.

Live line Black color

Null line White color

Earth line Green color

Wiring the AC Power Input:

: Earth line.

: Null line.

: Live line.

Note

1. Please do not connect the power plug of the

power cable to a standard wall outlet during

this installation.

2. The example is based on PWR-40-24 for

PWR-75-24, PWR-120-48, PWR-240-48 and

PWR-480-48.

The indication will be the same, but a

different location.

Step 7: Please connect the power plug of the power cable to

a standard wall outlet, then it will power on the DC

Single Output Industrial DIN Rail Power Supply units.

When the DC Single Output Industrial DIN Rail Power Supply

units receive power, the “DC OK” LED should remain solid

Green.

Figure 2. "DC OK" LED of DC Single Output Industrial DIN Rail Power

Supply units.

Single Output Industrial DIN Rail Power Supply

(-10 ~ 70 degrees C)

PWR-480-48 (MEAN WELL/ SDR-480-48): l 480W 48V DC

Single Output Industrial DIN Rail Power Supply

(-25 ~ 70 degrees C)

Note

Strongly recommend to use 24V DC Single

Output Industrial DIN Rail Power Supply units

for Industrial Non-PoE equipment; 48V DC

Single Output Industrial DIN Rail Power Supply

units for Industrial PoE equipment.

The box should contain the following items:

The DC Single Output Industrial DIN Rail Power Supply Unit l

x 1

This User’s Manual x 1 l

If any item is found missing or damaged, please contact your

local reseller for replacement.

Step 3: Use Long Nose Pliers to remove the cover of 3 lines.

Step 6: Please connect the live line, null line and earth line to

the corresponding location.

Figure 1. Connect the 3 lines from AC Power Cord Cable to the

corresponding location.

Note

1. The example is based on PWR-40-24 for

PWR-75-24, PWR-120-48, PWR-240-48 and

PWR-480-48. The DC OK indication will be

the same, but in a different location.

2. +V ADJ. for O/P voltage adjustment (PWR-

40-24 / PWR-60-24 / PWR-480-48 only),

the range is 24V to 30V for PWR-40-24 /

PWR-60-24 and 48V to 55V for PWR-480-

48. Adjustable with screwdriver and voltage

measure with multimeter.

Warning

For PWR-120-48, one 115V AC / 230V AC

adjustable DIP switch is located on the bottom

of front panel. One 115V AC / 230V AC adjust-

able DIP switch (PWR-120-48 only), this is for

system input voltage selection. Please assure

the setting of AC DIP switch with local voltage

is compatible; otherwise, it will cause device

damage.

115V AC for 100V to 120V AC input voltage.

230V AC for 200V to 240V input voltage.

- 5- - 6 - - 7 - - 8 -

4. DC Power Terminal Block Installation

The DC Single Output Industrial DIN Rail Power Supply units

consist of two sets of DC power output contact and one set

of DC OK Relay contact (PWR-40-24, PWR-60-24 and

PWR-480-48 only).

Figure 3. DC Single Output Industrial DIN Rail Power Supply Upper

Panel.

Note

In this chapter, the example is based on

PWR-40-24 for PWR-75-24, PWR-120-48,

PWR-240-48 and PWR-480-48. There is no DC

OK Relay Contact, and a different DC voltage

output contact location.

Wiring the Power Inputs

The two sets of the DC power output contact of DC Single

Output Industrial DIN Rail Power Supply units are used for

connecting to terminal block with two DC redundant powers

input.

Note

Please do not connect the power plug of the

power cable to a standard wall outlet during

this installation.

Please follow the steps below to insert the power wire.

Step 1: PleasendoneterminalblockconnectorwithintwoDC

power inputs. The power contact distributor is shown

below:

Step 4: Tighten the wire-clamp screws for preventing the wires

from loosening.

V+ V+ V- V- Relay Contact

Step 5: Install the terminal block on PLANET Industrial

Ethernet equipment.

Step 6: Connect the power plug of the power cable to a

standard wall outlet; then the DC Single Output

Industrial DIN Rail Power Supply units will get

and provide power to PLANET Industrial Ethernet

equipment.

DC OK Relay Contact (PWR-40-24 / PWR-60-24 /

PWR-480-48 Only)

The PWR-40-24 / PWR-60-24 / PWR-480-48 DC Single Output

Industrial DIN Rail Power Supply unit provides DC OK Relay

Contact function, as the detailed description is shown below:

Contact Close When the output voltage reaches the

adjusted output voltage.

Contact Open When the output voltage drop below

90% of output voltage.

Contact Ratings (max.)

PWR-40-24 / PWR-60-24:

30V/1A resistive load.

PWR-480-48:

60V/0.3A, 30V/1A resistive load.

DIN-Rail Mounting

The DIN-Rail is equipped with the DC Single Output Industrial

DIN Rail Power Supply units when out of factory. To hang the

DC Single Output Industrial DIN Rail Power Supply units, follow

the steps below:

Note

1. The example is based on PWR-40-24 for

PWR-60-24, PWR-75-24, PWR-120-48,

PWR-240-48 and PWR-480-48. The installa-

tion will be the same.

2. Admissible DIN-RAIL: TS35/7.5 or TS35/15.

Step 1: Lightly press the bottom of DIN-Rail into the track.

Step 2: Check whether the DIN-Rail is tightly on the track.

Step 3: Please refer to the following procedures to remove the

DC Single Output Industrial DIN Rail Power Supply

units from the track.

Step 4: Lightly press the bottom of DIN-Rail to remove it from

the track.

5. Product Specications

Model

PWR-40-24

(MEAN WELL

MDR-40-24)

PWR-60-24

(MEAN WELL

MDR-60-24)

PWR-75-24

(MEAN WELL

DR-75-24)

HardwareSpecications

Dimensions

(W x H x D)

40 x 90 x 100

55 x 125 x 100

Weight (kg) 0.3kg 0.3kg 0.6kg

Input

Voltage

100-240V AC,

50/60Hz, 1.1A

100-240V AC,

50/60Hz, 1.8A

100-240V AC,

50/60Hz, 2.0A

Power

Output

40 Watts, 24V,

1.7A

60 Watts, 24V,

2.5A

75 Watts, 24V,

3.2A

Temperature

Operating:

-20 ~ 70

degrees C

Storage:

-40 ~ 85

degrees C

Operating:

-20 ~ 70

degrees C

Storage:

-40 ~ 85

degrees C

Operating:

-10 ~ 60

degrees C

Storage:

-20 ~ 85

degrees C

Humidity Operating: 20 ~ 90%

Storage: 10 ~ 95% (non-condensing)

Installation DIN Rail TS-35/7.5 or 15

Safety &

Function*

PWR-40-24 (MEAN WELL / MDR-40-24):

UL508, UL60950-1, TUV EN60950-1

approved, NEC class 2 / LPS

compliant.

PWR-60-24 (MEAN WELL / MDR-60-24):

UL508, TUV EN60950-1 approved

PWR-75-24 (MEAN WELL / DR-75-24):

UL508, TUV EN60950-1 approved.

Model

PWR-120-48

(MEAN WELL

DR-120-48)

PWR-240-48

(MEAN WELL

DR-240-48)

PWR-480-48

(MEAN WELL

SDR-480-48)

HardwareSpecications

Dimensions

(W x H x D)

65 x 125 x 100

125 x 125 x

100 mm

85.5 x 125.2 x

128.5 mm

Weight (kg) 0.79kg 1.2kg 1.6kg

Input

Voltage

100-240V AC,

50/60Hz, 3.3A

100-240V AC,

50/60Hz, 3.5A

100-240V AC,

50/60Hz, 5.0A

Power

Output

120 Watts, 48V,

2.5A

240 Watts, 48V,

480 watts, 48V,

10A

Temperature

Operating:

-10 ~ 60

degrees C

Storage:

-20 ~ 85

degrees C

Operating:

-10 ~ 70

degrees C

Storage:

-20 ~ 85

degrees C

Operating:

-25 ~ 70

degrees C

Storage:

-25 ~ 85

degrees C

Humidity Operating: 20 ~ 90%

Storage: 10 ~ 95% (non-condensing)

Installation DIN Rail TS-35/7.5 or 15

Safety &

Function*

PWR-120-48 (MEAN WELL / DR-120-48):

UL508, UL60950-1, TUV EN60950-1

approved.

PWR-240-48 (MEAN WELL / DR-240-48):

UL508, UL60950-1, TUV EN60950-1

approved.

PWR-480-48 (MEAN WELL / SDR-480-48):

UL508, UL60950-1, TUV EN60950-1

approved.

* The power supply is considered a component which will be

installed into nal equipment. The nal equipment must be

re-conrmedthatitmeetsEMCdirective.

2351-AH0400-002

1 4 2 3 5 6

Power 1 Fault Power 2

- + - +

Note

The wire gauge for the terminal block should

be in the range between 12 and 24 AWG.

Step 2: Insert 4 DC power wires into the contacts 1 and 2 for

POWER 1, or 5 and 6 for POWER 2.

Step 3: Connect the 4 DC power wires from terminal block

to DC power output contact of DC Single Output

Industrial DIN Rail Power Supply units.

DC OK Relay Contact

Note

The wire gauge for the terminal block should

be in the range between 12 and 24 AWG.

Produktspecifikationer

Varumärke:	Planet
Kategori:	Inte kategoriserad
Modell:	PWR-120-48
Enhetsplacering:	Vrijstaand
Typ av operation:	Buttons, Rotary
Vikt:	47000 g
Bredd:	450 mm
Djup:	600 mm
Höjd:	850 mm
Nettoskatt:	2300 W
Antal platsinställningar:	9 couverts
Dörrfärg:	Wit
Sladdlängd:	1.7 m
Fördröjd starttimer:	Ja
Startfördröjning:	19 uur
Barnlås:	Ja
Torkningsklass:	A
Cykelns längd:	155 min
Ljudnivå:	49 dB
Årlig-energiförbrukning:	176 kWu
Energieffektivitetsklass (gammal):	A
Belysning inuti:	Nee
Vattenförbrukning per cykel:	13 l
Var klass:	A
Nuvarande:	10 A
Antal tvättprogram:	4
Justerbara fötter:	Ja
Färgkontrollpanel:	Wit
Saltindikator:	Ja
Sköljmedelsindikator:	Ja
AquaStop-funktion:	Ja
Glasskydd:	Nee
Tvättprogram:	Eco, Normal, Pre-wash, Quick
Energiförbrukning per cykel:	0.8 kWu
Årlig vattenförbrukning:	2860 l
Avloppsslangens längd:	1.65 m
Vattentillförselslangens längd:	1.55 m
Inbyggd vattenavhärdare:	Ja