Porter-Cable PCE341 Bruksanvisning

Porter-Cable Sågmaskin PCE341

Läs nedan 📖 manual på svenska för Porter-Cable PCE341 (36 sidor) i kategorin Sågmaskin. Denna guide var användbar för 18 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/36
Française : Page 12
Español: Página 23
PCE341
VS ORBITAL JIG SAW
3/4" (20 mm) STROKE
SIERRA CALADORA ORBITAL
VV DE 20 mm (3/4") CPM
SCIE SAUTEUSE ORBITALE
À VITESSE VARIABLE
ET COURSE DE
20 mm (3/4 po)
Instruction manual
Manuel d'instructions
Manual de'instrucciones
www.portercable.com
INSTRUCTIVO DE OPERACIÓN, CENTROS
DE SERVICIO Y PÓLIZA DE GARANTÍA.
LÉASE ESTE INSTRUCTIVO
ANTES DE USAR EL PRODUCTO.
2 - ENG
SAFETY GUIDELINES - DEFINITIONS
indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
indicates a potentially haz ard ous situation which, if not
avoided, may result in minor or mod er ate injury.
NOTICE used without the safety alert symbol indicates potentially
hazardous situation which, if not avoided, result in may property damage.
To reduce the risk of injury, read the instruction manual.
GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and all instructions
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is unavoidable, use a
ground fault circuit interrupter (GFCI) protected supply. Use of a GFCI
reduces the risk of electric shock.
3 - ENG
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result
in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used. Use
of dust collection can reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power source and/or the battery pack from
the power tool before making any adjustments, changing accessories,
or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc., in accordance with
these instructions taking into account the working conditions and the
work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.

Produktspecifikationer

Varumärke: Porter-Cable
Kategori: Sågmaskin
Modell: PCE341

Behöver du hjälp?

Om du behöver hjälp med Porter-Cable PCE341 ställ en fråga nedan och andra användare kommer att svara dig


Sågmaskin Porter-Cable Manualer

Porter-Cable

Porter-Cable PCE700 Bruksanvisning

2 Oktober 2024
Porter-Cable

Porter-Cable PCCM300 Bruksanvisning

17 September 2024
Porter-Cable

Porter-Cable PCCS340 Bruksanvisning

12 September 2024
Porter-Cable

Porter-Cable PCXB310BS Bruksanvisning

9 Augusti 2024
Porter-Cable

Porter-Cable PCE341 Bruksanvisning

5 Augusti 2024

Sågmaskin Manualer

Nyaste Sågmaskin Manualer

Craftsman

Craftsman CMCPS630 Bruksanvisning

10 Januari 2025
Husqvarna

Husqvarna 455e Rancher Bruksanvisning

8 Januari 2025
Gude

Gude GSS 400 Bruksanvisning

8 Januari 2025
Cocraft

Cocraft PRO RT18-PL Bruksanvisning

8 Januari 2025
Makita

Makita DUC306PG2 Bruksanvisning

8 Januari 2025
Echo

Echo CS-400 Bruksanvisning

8 Januari 2025
Echo

Echo CS-370 Bruksanvisning

8 Januari 2025
Fuxtec

Fuxtec FX-E1HAS20 Bruksanvisning

8 Januari 2025
Einhell

Einhell BT-MB 550 U Bruksanvisning

7 Januari 2025
Sun Joe

Sun Joe 24V-CSSHRP-CT Bruksanvisning

7 Januari 2025