Prem-i-air EH1442 Bruksanvisning

Prem-i-air Värmare EH1442

Läs nedan 📖 manual på svenska för Prem-i-air EH1442 (8 sidor) i kategorin Värmare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/8

EH1442

2 kW Mica Column Heater

2 Heat settings

Electronic thermostat with remote control

Built-in carrying handle

Durable Castors

Safety overload cut-out

Cable storage feature

Page 1

IMPORTANT

Installer and Users please note:

These instructions should be read carefully and left with the

user of the product for future reference.

BEFORE USE

You must inspect the appliance including its cable and plug for any

signs of damage. If the product is damaged, DO NOT use it, and

contact your supplier immediately.

INSTALLATION

Attaching the feet and castors.

Turn the appliance upside down and hold it steady.

Slide the foot into the base of the appliance adjacent to the

mains cable entry. A click will be heard when it is correctly

aligned.

Slide the castor and axle assembly into the base of the

appliance at the opposite end. Again, a click will be heard

when it is correctly aligned.

Return the appliance to the upright position.

OPERATION

Plug the mains lead into a 13 Amp mains socket.

If connecting via an extension lead, make sure that the lead

is rated at 13 Amps or more, and that it is fully unwound.

Switch the appliance on at the mains socket.

Turn on the rocker switch at the side of the appliance

adjacent to the mains cable entry.

The display will light briefly.

Press the button to switch the appliance ON.

Page 2

The digital display will display the

room temperature.

The up- and down-arrow buttons can

be used to select full power or half

power. This is indicated by the

segments to the right of the flame

symbol. Small segment lit = half

power. Both segments lit = full power.

To set the thermostat press the

TEMP button, then press the up- or

down-arrow buttons to change the

target temperature. The thermometer symbol will illuminate,

and the digital display will flash, showing the target

temperature. After 5 seconds the display will stop flashing

and return to displaying the room temperature.

To set the timer press the TIMER button. The clock symbol

will illuminate. Then use the up- and down-arrow buttons to

set the number of hours for which the heater is to run before

automatically switching off.

Unplug the appliance from the mains when not in use. The

cable can be wrapped around the plastic cable tidy on the

front panel.

USING THE REMOTE CONTROL

The remote control duplicates all the controls that are on the

control panel.

Page 3

Produktspecifikationer

Varumärke:	Prem-i-air
Kategori:	Värmare
Modell:	EH1442
Färg på produkten:	Wit
Vikt:	1000 g
Bredd:	203 mm
Djup:	203 mm
Höjd:	50 mm
Placering:	Table, Wall
Antal Ethernet LAN (RJ-45)-portar:	2
Monteringsalternativ för kabellås:	Ja
Kabellåsspårtyp:	Kensington
Strömförbrukning (max):	13 W
Anslutning för nätadapter:	Ja
Modulation:	256-QAM
Ethernet LAN, dataöverföringshastigheter:	10,100,1000 Mbit/s
Nätverksstandard:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11n, IEEE 802.1Q, IEEE 802.1x
Säkerhetsalgoritmer som stöds:	WPA-PSK
Internera:	Ja
Webbaserad hantering:	Ja
Utström:	1.5 A
Spännande:	12 V
DHCP-server:	Ja
Maximal dataöverföringshastighet:	1300 Mbit/s
2,4 GHz:	Ja
5 GHz:	Ja
VLAN=support:	Ja
Power over Ethernet (PoE):	Ja
Antennfunktioner:	Ingebouwde antenne
Strömförbrukning (typiskt):	7 W
Drifttemperatur (TT):	0 - 60 °C
Relativ luftfuktighet i drift (VV):	10 - 95 procent