Privileg PHVK3NN5FIN Bruksanvisning

Privileg Ugn PHVK3NN5FIN

Läs nedan 📖 manual på svenska för Privileg PHVK3NN5FIN (8 sidor) i kategorin Ugn. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
EN
1
PRODUCT DESCRIPTION
DAILY REFERENCE
GUIDE
CONTROL PANEL
Before using the appliance carefully read the Health and Safety guide.
OVEN CONTROLS
1. SELECTION KNOB
For switching the oven on by selecting a function.
Turn to the position to switch the oven off.
2. THERMOSTAT KNOB
Turn to select the temperature you require.
3. LED THERMOSTAT / PREHEATING
Switches on during the heating process. Switches off
once the desired temperature is reached.
COOKTOP CONTROLS
A. for front left hotplate
B. for rear left hotplate
C. for rear right hotplate
D. for front right hotplate
You can download the Safety Instructions
and the Use and Care Guide by visiting
our website docs. whirlpool. eu and
following the instructions on the back of
this booklet.
A 1 C
1. Control panel
2. Fan
3. Circular heating element
(non-visible)
4. Shelf guides
(the level is indicated on the front
of the oven)
5. Door
6. Upper heating element/grill
7. Lamp
8. Identification plate
(do not remove)
9. Bottom heating element
(non-visible)
1
2
3
4
5
7
9
6
8
B D2 3
2
ACCESSORIES
Download the Use and Care Guide from
docs. whirlpool. eu for more information
WWW
WIRE SHELF BAKING TRAY
The number and type of accessories may vary depending on which model is purchased.
Other accessories can be purchased separately from the After-sales Service.
INSERTING THE WIRE SHELF AND OTHER
ACCESSORIES
Insert the wire shelf horizontally by sliding it across
the shelf guides, making sure that the side with the
raised edge is facing upwards.
Other accessories, such as the baking tray, are
inserted horizontally in the same way as the wire
shelf.
REMOVING AND REFITTING THE SHELF GUIDES
To remove the shelf guides, remove the fixing
screws (if present) on both sides with the aid of a coin
of a tool. Lift the guides up and pull the lower parts
out of their seatings: The shelf guides can now be
removed.
To refit the shelf guides, first fit them back into
their upper seating. Keeping them held up, slide them
into the cooking compartment, then lower them into
position in the lower seating. Refit the fixing screws.
Download the Use and Care Guide from
docs. whirlpool. eu for more information
WWW
FUNCTIONS
OFF
For switching off the oven.
LIGHT
To switch the oven light on/off.
CONVENTIONAL
For cooking any kind of dish on one shelf.
CONVECTION BAKE
For cooking meat and pies with liquid filling
(savoury or sweet) on a single shelf, and pizzas on
one or two shelves. This function delivers an even,
golden, crisp top and base. When cooking on two
levels, switch the position of the dishes halfway
through cooking to cook food more evenly.
GRILL
For grilling steaks, kebabs and sausages,
cooking vegetables au gratin or toasting bread.
When grilling meat, we recommend using a tray to
collect the cooking juices: Position the pan on any
of the levels below the wire shelf and add 500ml of
drinking water.
GRATIN
For roasting large joints of meat (legs, roast
beef, chicken). We recommend using a tray to
collect the cooking juices: Position the pan on any
of the levels below the wire shelf and add 500ml of
drinking water. The turnspit (if provided) can be used
with this function.
DEFROSTING
To speed up defrosting of food.
EN
3
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal.
Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent film
from the oven and remove any accessories from inside
it.
Heat the oven to 250°C for about one hour, preferably
using the “Convection Bake function. The oven must
be empty during this time.
Follow the instructions for setting the function
correctly.
Please note: It is advisable to air the room after using the
appliance for the rst time.
USING THE APPLIANCE FOR THE FIRST TIME
1. SELECT A FUNCTION
To select a function, turn the selection knob to the
symbol for the function you require.
2. ACTIVATE A FUNCTION
To start the function you have selected, turn the
thermostat knob to set the temperature you require.
To interrupt the function at any time, switch o the
oven, turn the selection knob and the thermostat knob
to to and .
3. PREHEATING
Once the function has been activated, the LED
thermostat will switch on signalling that the
preheating process has begun.
At the end of this process, the LED thermostat
switches off indicating that the oven has reached the
set temperature: at this point, place the food inside
and proceed with cooking.
Please note: Placing the food in the oven before preheating
has nished may have an adverse eect on the nal cooking
result.
• COOKTOP OPERATION
(see the instructions supplied with the cooktop)
Turn the control knob of the relevant hotplate
clockwise to the desired power setting.
The oven control panel features 4 adjustable knobs
for cooktop operation. The cooktop control knobs
are marked with a numerical scale corresponding
to different power settings, and a series of function
symbols.
GENTLE HEAT
To allow dough to rise, to soften butter taken
from the fridge, to keep baby bottles or food warm,
also for making yoghurt, melting chocolate, etc.
This function is only available when the residual
heat indicator is on. For this function, make sure the
residual heat indicator of the desired hotplate is on.
Turn the knob to . To deselect the function, change
the position of the knob.
HEAT MAINTENANCE
To maintain a constant temperature of 60° until
the end of cooking. To select this function, turn the
knob to .
FAST BOIL
This function is used to bring water to the boil
rapidly and remains on for a preset time. At the end
of the preset time, the cooktop automatically returns
to the maximum power setting. This function can be
selected even during cooking.
Important: before selecting this function, make sure
the pot is positioned on the selected hotplate in order
to avoid any damage to the cooktop surface. The
stated performance values for this function are those
guaranteed for all glass ceramic cooktops. For this
function, place the pot on the selected hotplate and
turn the knob to . To deselect, change the position
of the knob.
MULTIZONE
This is available on the front left and rear
left hotplates. This extends the heating area of the
cooktop in order to allow the use of large, oval or
rectangular pots or cooking receptacles. To select
this function: turn the knob to and wait until
the residual heat indicator for the hotplate begins
to flash. To switch on the triple zone function (if
available), wait until the LED begins flashing quickly.
Select the power setting required by turning the knob
anticlockwise. The residual heat indicator remains on
to indicate that the cooktop is in use. To deselect, turn
the knob to by turning the knob anticlockwise.
Please note: The multizone function can only be switched on
for the double and triple hotplates of the cooktop.
DAILY USE

Produktspecifikationer

Varumärke: Privileg
Kategori: Ugn
Modell: PHVK3NN5FIN

Behöver du hjälp?

Om du behöver hjälp med Privileg PHVK3NN5FIN ställ en fråga nedan och andra användare kommer att svara dig




Ugn Privileg Manualer

Ugn Manualer

Nyaste Ugn Manualer