Proaim P-OHLR-01 Bruksanvisning

Proaim Stativ P-OHLR-01

Läs nedan 📖 manual på svenska för Proaim P-OHLR-01 (4 sidor) i kategorin Stativ. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/4
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
Overhead Camera / Light Modular Studio Rig
OHLR(P- -01)
A s s e m b l y M a n u a l
3 x Accessory Spacers
Ball Head 3” Riser
End Spacers with Stand Post Adapters Wrench 1/4" 20 and 3/8" 16 Screws - -
4 Each Secon
2
Aaching Rail Secon
The End Spacers have and 1/4” 3/8”
mounng threads. Mount the 2 Stand
adapters at the boom of the End spacers.
Then mount it on the stand and secure it by
ghtening the knob.
Press in the Track into the end caps unl you
hear a click.
Proaim Overhead Rig Setup
The Accessory Spacers also include and1/4”
3/8” threads for mounng accessories. Place
the Accessory Spacers at the desired locaon
along the Track. The Spacer s end caps must’
be facing down. Make sure the Accessory
Spacer clicks on the track rails.
3x Accessory Spacers
Aach track secons as shown and secure
them using the provided bolts. The Track
comes in a pair of 3 x 4 secons, so the
maximum length for the Track is 12.
The Track includes two types of Spacers:
2x End Spacers
3
NOTE: You can mount mulple camera gears
on Accessory Spacers, e.g. cameras, lights, mics,
monitors, etc.
Aaching Riser for Camera Setup3”
The Overhead comes with the ball head that
features a quick-release camera plate. Aach
ball head with Riser and secure properly.3”
Screw in your riser with Accessory Spacer, as-
shown in the image.
Mount your camera into the Quick release
plate and secure it properly. You can adjust
the camera angle according to your needs.

Produktspecifikationer

Varumärke: Proaim
Kategori: Stativ
Modell: P-OHLR-01

Behöver du hjälp?

Om du behöver hjälp med Proaim P-OHLR-01 ställ en fråga nedan och andra användare kommer att svara dig


Stativ Proaim Manualer

Proaim

Proaim CR-200 Bruksanvisning

31 Januari 2025
Proaim

Proaim P-TMGC-01 Bruksanvisning

7 December 2024
Proaim

Proaim CM-SSHT-01 Bruksanvisning

25 September 2024
Proaim

Proaim CM-ACKG-02 Bruksanvisning

25 September 2024
Proaim

Proaim CM-BLPR-01 Bruksanvisning

25 September 2024
Proaim

Proaim CM-GPMG-01 Bruksanvisning

25 September 2024
Proaim

Proaim P-CTST-01 Bruksanvisning

25 September 2024
Proaim

Proaim P-OHCP-02 Bruksanvisning

25 September 2024
Proaim

Proaim P-HDRP-01 Bruksanvisning

25 September 2024
Proaim

Proaim P-STRG-CF Bruksanvisning

25 September 2024

Stativ Manualer

Nyaste Stativ Manualer

FeiyuTech

FeiyuTech Vimble 3 Bruksanvisning

28 Mars 2025
FeiyuTech

FeiyuTech VB4SE Bruksanvisning

28 Mars 2025
Sky-Watcher

Sky-Watcher EQ8-Rh Bruksanvisning

28 Mars 2025
Manfrotto

Manfrotto C76CJ Bruksanvisning

28 Mars 2025
Manfrotto

Manfrotto MVT535AQ Bruksanvisning

28 Mars 2025
Manfrotto

Manfrotto 300N Bruksanvisning

28 Mars 2025
Manfrotto

Manfrotto 840 Bruksanvisning

28 Mars 2025
Manfrotto

Manfrotto MVM450A Bruksanvisning

28 Mars 2025
Manfrotto

Manfrotto 842 Bruksanvisning

27 Mars 2025
Explore Scientific

Explore Scientific iEXOS 100 Bruksanvisning

27 Mars 2025