Pyle PASC12 Bruksanvisning

Pyle högtalare PASC12

Läs nedan 📖 manual på svenska för Pyle PASC12 (7 sidor) i kategorin högtalare. Denna guide var användbar för 12 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7




2
Introduction
Thank you for purchasing this Pyle Pro PASC series speaker. The
loudspeaker is designed to provide you years of high performance in any
application that you require. Please read this manual carefully to fully
maximize the performance of the speaker.
Features
The PASC series features high-
level drivers and rugged components
and is designed for high-performance
applications.
The cabinet features heavy-duty
construction with reinforced corners. It
is covered with a black-carpeted finish
that will stand up to years of tour duty.
The integrated handles have been
carefully selected for their ergonomic
design and durability.
Both models are loaded with a premium Kapton voice coil woofer and
exhibit excellent bass response. The compression driver provides warm
midrange reproduction and crystal clear highs.
The integrated passive crossover network is assembled using quality
components and efficiently directs the frequencies to the proper drivers.
Connections
Your PASC series
speaker has an extremely
flexible connection panel.
There are two Speakon jacks
as well as two ¼jacks. You
can also hookup your speaker
cabinet using the Quick
Connect” speaker terminals,
which accommodate either
wire leads or a banana plug.
The jacks are wired in

3
parallel, which allows you to daisy chain additional speakers. Thus you can
use one amplifier channel to power multiple speakers.
Make certain that the wires you are using are at least 12 gauge
unshielded speaker cable (the lower the number, the thicker the wire). Do
not use shielded “instrument” cables.
Hooking speakers up in parallel decreases the overall
impedance, placing a greater load on the amplifier. Check your
amplifiers specifications to ensure that you are not overloading
the channel.
CAUTION: DO NOT US E MORE THAN ONE JACK AS AN
AMPLIFIER INPUT. DOING S O WILL DAMAGE THE S PEAKER!
Amplifier Requirements
Check the product specifications (page 5) to see the power handling
for your model. There are a couple of considerations to keep in mind when
choosing an amplifier to drive your PASC series speaker. While it is true
that an amplifier with a higher power rating can damage the drivers, under-
powering can be even more dangerous. When an amplifier is overdriven and
starts distorting, it generates transient frequencies that are much louder than
the program material. These wayward frequencies could damage your
speaker. A proper match is an amplifier which could drive the speaker up to
the cabinet’s RMS rating, without exceeding the amplifier’s own RMS level.
Operation
When powering on your equipment, make sure the volume level on
the amplifier is turned all the way down. This is to avoid the popping”
noise, which could damage your speaker.
The placement of speakers can be a bit tricky. This is especially true
to monitors as they are more susceptible to feedback. Being that a monitor is
meant to face the performers, the chances of feedback are much greater. The
trick is to place the monitor outside the microphones pickup pattern. For
most microphones the best position is directly behind the mic. Supercardioid
mics however, do not reject sound from the back very well, but do have a

Produktspecifikationer

Varumärke: Pyle
Kategori: högtalare
Modell: PASC12

Behöver du hjälp?

Om du behöver hjälp med Pyle PASC12 ställ en fråga nedan och andra användare kommer att svara dig




högtalare Pyle Manualer

högtalare Manualer

Nyaste högtalare Manualer