Pyle PDWM5000 Bruksanvisning

Pyle Inte kategoriserad PDWM5000

Läs nedan 📖 manual på svenska för Pyle PDWM5000 (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

PDWM5000

4 Mic VHF Wireless Microphone System

www.PyleUSA.com

PREFACE

Please read this manual before using this equipment in order to avoid damage through incorrect operation and to get

the best performance from your purchase. We also recommend that you keep this manual handy for future reference.

VHF series professional wireless microphone systems introduces a number of advanced techniques and components,

including the ecient low consumption RF transmission, impact elimination, slow controlled output, superiors

sensitivity VHF narrow band HF and MF lters and 15ppm Crystal Frequency Lock etc. Online simulation EDA and strict

quality control are applied to ensure each system with excellent function.

FEATURES:

• Introducing a special ALC circuit to ensure nondistortion;

• Frequency compressing expanding technique to lower the noise and enlarge the dynamic range.

• Superior squelch and high signal to noise ratio.

• Almost zero noise output when standby.

• Broad frequency response range, super low distortion.

• Perfect operation status indications.

• Multiple HF and MF narrow band lters to eliminate interfering signal.

• Introducing low power consumption components to ensure longer battery life.

• Special impact wave eliminating circuit for handheld microphone switches.

• Long practical distance. Over 80m in ideal circumstances; practical 20 m radius in complex circumstances.

• Multiple frequency design. Be able to use two microphones at the same time without mutual interference;

• Applicable for medium & small stages, karaoke halls, and home entertainment etc.

www.PyleUSA.com

SYSTEM SETUP

1. Plug the provided audio cable into the receiver's output connector, and the other end into a mixer or power MIX

amplier system. Extend the two antennas fully to the vertical position. Switch the receiver, the light ON POWER ON

will glow indicating the machine standby. (Better keep distance between the receiver and oor to ensure good

receiving signals).

2. Open the battery cover of the microphone and install the batteries inside the compartment properly, then re-attach

the battery cover.

3. Position the transmitter power switch to , indicator light will glow ( position). ON MUTE

Now the receiver's corresponding channel light will also glow, indicating that the receiver has already received the

eective signals from the transmitter. Adjust volume knobs of the receiver and power amplier to ensure the suitable

volume for the system. Speak with microphone to check the sound.

4. When the transmitter power indicator dardens, it indicates low battery power.

Please change with new batteries in time. ( )Note: Do Not Mix Old and New Batteries

5. When using multiple system at the same time, it is necessary to use machines of dierent frequency.

System Turn On Process: Receiver Mixer or Pre Amplier Power Amplier (Opposite when Turned OFF)

www.PyleUSA.com

RECEIVER AND TRANSMITTER

FRONT PANEL OF RECEIVER REAR PANEL OF RECEIVER

RECEIVER FUNCTIONS

1. Power lndicator;

2. Power Switch;

3. CH. A Volume Control;

4. CH. A Receiving lndicator;

5. CH. B Receiving lndicator;

6. CH. B Volume Control;

7. CH. C Volume Control;

8. CH. C Receiving lndivator;

www.PyleUSA.com

RECEIVER AND TRANSMITTER

TRANSMITTER FUNCTIONS

1. Cartridge Grille

2. LED Power lndicator

3. Power Switch

4. Mic Body

5. Battery Compartment

SAFETY DIRECTION

1. Please read this manual carefully before operating the product.Read Carefully:

2. Keep this manual handy for future reference. Keep the Manual:

3. Please follow all the cautions indicated on the machine or in the manual.Mind the Cautions:

4. F Please follow all the operation process and operation instruction.ollow lnstructions:

5. Safety Environment: Don't put the machine in the place of high humidity, high electro magnetic eld, strong sun

light and high temperature.

6. Attention when Stop Using: If the system is not to be used for long periods of time, remove the batteries from the

mic and unplug the AC cord from the mains outlet.

7. Before cleaning, turn the system power. Don't clean it with liquid or sprayer. Clean only with dry cloth. Cleaning: OFF

8. Accessories: Only use the provided accessories or other certicated products.

9. Power Supply: The machine is only applicable to the indicated power supply. Please conrm whether it is suitable for

your district.

9. CH. D Receiving lndicator;

10. CH. D Volume Control;

11. CH.C/D Antenna Connector;

12. CH.A/B Antenna Connector;

13. AC Power Input;

1 2 3 4 5

34 6 7 8 10

PW MA2 000 P ROF ES SIO NAL W IRE LES S MIC ROP HON E SY STE M

POW ER

CHA VO LUME CHB V OLUME CHC V OLUME CHD V OLUME

9MIX OUT

ANT.CD ANT.AB

OUT.D

OUT.C

OUT.B BALANACED DC13V/500mA

OUT.A

11 13 12

Produktspecifikationer

Varumärke:	Pyle
Kategori:	Inte kategoriserad
Modell:	PDWM5000
Typ av operation:	Buttons, Level
Färg på produkten:	Crème
Vikt:	1200 g
Bredd:	186 mm
Djup:	217 mm
Höjd:	261 mm
Uppvärmningsfunktion:	Ja
Förpackningens vikt:	1600 g
Förpackningens bredd:	180 mm
Djuppackning:	245 mm
Förpackningshöjd:	275 mm
Håll varm funktion:	Nee
Avfrostningsfunktion:	Ja
Tillgångar:	870 W
Maximal ineffekt:	870 W
Antal skivor:	2 snede(n)
Stopp/avbryt-knapp:	Ja
Hög huvudmekanism:	Ja
Avtagbar smulbricka:	Ja
Variabel skorpa färginställning:	Ja
Coolwall kapsling:	Ja
Solningsnivåer:	7
Antal lås:	2
Elektronisk bryningskontroll:	Ja
Smulbricka:	Ja
Minnesfunktion:	Ja
Harmoniserad systemkod (HS):	8516720000
Extra bred plats:	Ja