Pyle PDWMU103 Bruksanvisning

Pyle mikrofon PDWMU103

Läs nedan 📖 manual på svenska för Pyle PDWMU103 (6 sidor) i kategorin mikrofon. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/6

UHF Wireless Microphone System

Questions? Issues?

We are here to help!

Phone: (1) 718-535-1800

Email: support@pyleusa.com

www.PyleUSA.com2www.PyleUSA.com 3

Please read this manual carefully before using and strictly operate and store

in accordance with the instructions. Please save it for your future reference.

The wireless system is reliable in performance, portable and easy to operate,

and is suitable for use at home, school, training room and outdoor performance.

The wireless system adopts advanced intelIigent digital technology and high

integrated circuit design, which has the advantages of strong stabiIity, intelligence

and high eciency.

FEATURES

1. UHF frequency for stronger anti-interference abiIity and stable transmission

distance.

2. The transmitter has a frequency modulation function to meet the simultaneous

use of multiple frequencies.

3. The receiver adopts automatic frequency lock design, which makes operation

simpler and smarter.

4. Mini receiver design with 6.35mm standard audio plug, plug and play.

5. The receiver has a rechargeable function, circuit protection technology and a

detachable large-capacity Iithium battery. It can also be connected to a power

bank for Iong-term oIine use.

6. Easy to operate, easy to use and have a good sense of experience.

RECEIVER FUNCTION DESCRIPTION

1. 6.35mm audio plug

2. Power switch

3. Power indicator, charging indicator

4. DC 5V charging port

5. RF signal indicator

6. Antenna

7. 18650 lithium battery negative electrode*

8. 18650 lithium battery compartment

9. 18650 lithium battery positive electrode*

Note: Be sure to conrm the positive/negative battery before installing it to avoid

damage to the receiver! Please fully charge the lithium battery before using it.

TRANSMITTER FUNCTION DESCRIPTION

1. Handheld Microphone

18650

91. Microphone head

2. LED display

3. Microphone switch

4. CH button

5. Battery compartment

6. Transmitter antenna

7. Tail cover

www.PyleUSA.com4www.PyleUSA.com 5

BODYPACK TRANSMITTER

1. Antenna

2. Volume Adjust and ON/OFF button

3. Microphone Connector

4. CH Button DOWN

5. CH Button UP

6. LED Display

7. Battery compartment

Double AA batteries (AA 1.5VX2)

8. Headset microphone

(Lavalier microphone)

OPERATION

Tips:

Under normal circumstances, the product has been completed at the factory, and

can be used normally after opening the box, no need to adjust the frequency.

If you need to adjust the frequency, please follow the steps below.

Note: Before operating, make sure the transmitter and receiver are both o.

The operation sequence of handheld microphone:

1. Operate the transmitter

2. Open the receivers

3. Conrm at the transmitter

1. Press and hold the power button and CH button of the transmitter at the same

time until the LED display ashes then release the button.

2. Turn ON the receiver power button, please pay attention to the RF signal indicator

of receiver. Under normal circumstances, the receiver RF signal indicator ashes

continuously for 4 times and then goes out. (In this case, the receiver and the

transmitter are connected successfully.)

3. Short press the transmitter CH button to conrm the connection between the

transmitter and the receiver. At this time, the transmitter display stops ashing,

and the receiver RF signal indicator is always ON, indicating that the receiver and

the transmitter are connected successfully.

Note:

If it can’t be connected, please repeat the above operation.

(The transmitter must be operated before the receiver is turned ON.)

When the same frequency interference occurs, please short press the transmitter

CH button. At this time, the transmitter will change the frequency to avoid

frequency interference.

Bodypack Transmitter Operation Sequence

1. The transmitter and receiver are both o.

2. Press and hold " " CH button and turn ON the power switch button to " " at ON

the same time until the LED display ashes for 4 seconds, then release the " "

CH button.

3. Turn ON the receiver power button, pay attention to the RF signal indicator of

receiver. Under normal circumstances, the receiver RF signal indicator ashes

continuously for 4 times and then goes out.

(ln this case, the receiver and the transmitter are connected successfully)

4. Short press the transmitter " " CH button to conrm the connection between

the transmitter and the receiver. At this time, the transmitter display stops

ashing, and the receiver RF signal indicator is always ON, indicating that the

receiver and the transmitter are connected successfully.

Produktspecifikationer

Varumärke:	Pyle
Kategori:	mikrofon
Modell:	PDWMU103

Behöver du hjälp?

Om du behöver hjälp med Pyle PDWMU103 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

mikrofon Pyle Manualer

Pyle Pro PDWM2560 Bruksanvisning

31 December 2025

Pyle PDMICKT34 Bruksanvisning

6 December 2024

Pyle PDWM812WH Bruksanvisning

6 December 2024

Pyle PDWM3100 Bruksanvisning

6 December 2024

Pyle PDWM224BK Bruksanvisning

6 December 2024

Pyle PDWM221WT Bruksanvisning

6 December 2024

Pyle PMKSHUSB04 Bruksanvisning

19 Oktober 2024

Pyle PDWM8225 Bruksanvisning

14 Oktober 2024

Pyle PDWM2135 Bruksanvisning

7 Oktober 2024

Pyle Pro PDWM2450 Bruksanvisning

6 Oktober 2024

mikrofon Manualer

Nyaste mikrofon Manualer

MXL Forge Bruksanvisning

22 Mars 2025

Austrian Audio OC16 Bruksanvisning

19 Mars 2025

Kenwood KMC-66 Bruksanvisning

18 Mars 2025

Kenwood KMC-70 Bruksanvisning

18 Mars 2025

Kenwood KMC-32 Bruksanvisning

18 Mars 2025

Comica Vimo C2 Bruksanvisning

12 Mars 2025

Louroe Electronics Verifact B Bruksanvisning

10 Mars 2025

Louroe Electronics Verifact C Bruksanvisning

10 Mars 2025

Louroe Electronics Verifact K Bruksanvisning

10 Mars 2025

Louroe Electronics C-ML Bruksanvisning

10 Mars 2025