Pyle PGTAMPL100 Bruksanvisning

Pyle mottagare PGTAMPL100

Läs nedan 📖 manual på svenska för Pyle PGTAMPL100 (2 sidor) i kategorin mottagare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
30 Watt Guitar Amplifier
8'' Speaker with Volume, Bass, Treble,
Gain and Digital Reverb Controls
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Before going any further, make sure that your amplier is compatible
with your mains electricity supply.
1. Ensure that the (power) switch is set to the position.MAINS OFF
2. Connect the supplied mains (power) lead into the mains electricity supply.
3. Ensure that the VOLUME controls are set to zero.
4. Plug your guitar into an jack socket.INPUT
5. Turn the front panel switch to the position.MAINS ON
6. Turn the VOLUME up to your preferred level and your amplier is ready to play.
Function
1-2. HIGH and LOW INPUT: Input for your guitar. Use a good quality guitar cable
(i.e. one that’s screened/shielded) to help prevent noise, interference and
unwanted feedback.
3. GAIN: This control sets the operating level of the pre-amp. Simply turn up the Gain
control until the required amount of distortion is achieved.
4. Select the drive channel or normal channel.SELECT:
5. Increasing the Treble will make your sounds brighter and more cutting, TREBLE:
turning it down will decrease your tones edge and make it sound softer as a result.
6. Adjusts the sound level of middle-frequency range.MIDDLE:
7. Adjusts the sound level of the low-frequency range.BASS:
8. This equalization controls reverb lengthLENGTH:
9. This equalization controls reverb depthDEPTH:
10. VOLUME: This is the overall level control for the normal channel.
www.PyleUSA.com
1 2 3 5
46 7 8 9 10 11 12 13
11. LINE OUT: This is a 1/4"jack for hooking up external speakersto the amplier.
12. This is a 1/4"3-conductor stereo headphone jack for plugging in head PHONE:
phones.
13. The power switch turns your amplier on and o.POWER:
IMPORTANT SAFETY INSTRUCTIONS
1. Read all safety and operating instructions before using
this product.
2. All safety and operating instructions should be kept for
future reference.
3. Read and understand all warnings listed on the
operating instructions.
4. Follow all operating instructions to operate this product.
5. This product should not be used near water, i.e. Bathtub, sink, swimming pool,
wet basement, etc.
6. Only use dry cloth to clean this product.
7. Do not block any ventilation openings, It should not be placed at against a wall
or placed in a built-in enclosure that will impede the ow of cooling air.
8. Do not install this product near any heat sources; such as,radiators, heat registers,
stove or other apparatus (including heat producing ampliers) that produce heat.
9. Protect the power cord being walked on or pinched, particularly at Plugs,
convenience receptacles and the point where they exit from the apparatus.
10. Unplug this apparatus during lightning storms or when unused for long periods
of time.
11. Care should be taken so that objects do not fall and liquids are not spilled into
the unit through the ventilation ports or any other openings.
12. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way; such as, powersupply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally or
has been dropped.
13. WARNING:
To reduce the risk of re or electric shock,
do not expose this apparatus to rain or moisture.
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
www.PyleUSA.com

Produktspecifikationer

Varumärke: Pyle
Kategori: mottagare
Modell: PGTAMPL100

Behöver du hjälp?

Om du behöver hjälp med Pyle PGTAMPL100 ställ en fråga nedan och andra användare kommer att svara dig




mottagare Pyle Manualer

mottagare Manualer

Nyaste mottagare Manualer