Pyle PLMRA402 Bruksanvisning

Pyle mottagare PLMRA402

Läs nedan 📖 manual på svenska för Pyle PLMRA402 (12 sidor) i kategorin mottagare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/12
Elite Series Waterproof Amplifier
PLMRA402
400 Watt 4-Channel Amp System,
Dual MOSFET Power Supply
www.PyleUSA.com
2
Read through this user manual before using the product to ensure
its correct use. Keep this manual for future reference.
INTRODUCTION
The PLMRA402 has been designed using the latest electronic technology available.
The is with engineered features allowing you to produce high quality PLMRA402
stereo repro duction in mobile applications. This innovative system has been
designed a 12 volts DC negative ground power supply.
Easy installation with mounting hardware is provided. The has two PLMRA402
input levels. The high or low impedance input can be connected to units which
incorporate BTL circuity or common-ground types.
5
6 7
123 2 3
4
FIG 1
www.PyleUSA.com
3
FUNCTIONS
1. POWER ON LED: Lights up when the remote on system is energized.
2. INPUT GAIN CONTROL: Adjust high impedance input gain from 1 V to 300mV
for best matching with PREAMP output for your car stereo.
3. LOW IMPEDANCE INPUT (HIGH LEVEL INPUT): This unit is provided with two
terminal inputs (Front & Rear) for LOW impedance. If your car stereo has four
speaker outputs (LF, RF, LR, RR). Wire input as per FIG. 3 & FIG 3A.
If your car stereo has two speaker outputs, please wire as per FIG 4 & FIG 4A.
4. HIGH IMPEDANCE INPUT (LOW LEVEL INPUT): This unit is provided with gold
plated RCA input jacks for high impedance. Couple the RCA input with the car
stereo output using RCA type connector cables. If your stereo has only left and
right 2 channels outputs. You must use a Y-adaptor for connection (FIG 2).
5. POWER FUSE: Power fuse protects both this amplier and the automobile
electrical system from wrong electrical conditions.
6. POWER SUPPLY TERMINAL: Connct the +12V DC power supply wire into this
terminal. By lugs and screws accessible at the panel of this amplier (Fig. 5).
A. BATT + : Connect +12V DC power supply wire into this terminal from the (+)
terminal of the battery.
Ground terminal connects the ground wire from the chassis of the B. GROUND:
automobile.
C. REMOTE: Remote terminal connects the control wire which provides remote
turn-on and o of the amplier by the RADIO/CASSETTE players power
antenna wire.
7. SPEAKERS TERMINALS: Speakers can be easily connected to signal barrier strip.
You may use 4 to 8 ohms speakers. Before connecting, please check speaker
connection diagrams.

Produktspecifikationer

Varumärke: Pyle
Kategori: mottagare
Modell: PLMRA402

Behöver du hjälp?

Om du behöver hjälp med Pyle PLMRA402 ställ en fråga nedan och andra användare kommer att svara dig


mottagare Pyle Manualer

Pyle

Pyle PLMRMBT5B Bruksanvisning

6 December 2024
Pyle

Pyle P3001AT Bruksanvisning

6 December 2024
Pyle

Pyle PFMRA340BB.5 Bruksanvisning

17 Oktober 2024
Pyle

Pyle PLA2200 Bruksanvisning

30 September 2024
Pyle

Pyle Pro PTAU23 Bruksanvisning

25 September 2024
Pyle

Pyle PTAU45.5 Bruksanvisning

22 September 2024
Pyle

Pyle PWMA3003BT Bruksanvisning

21 September 2024
Pyle

Pyle PLAM2001D Bruksanvisning

19 September 2024
Pyle

Pyle PT1100 Bruksanvisning

19 September 2024
Pyle

Pyle PFA100 Bruksanvisning

19 September 2024

mottagare Manualer

Nyaste mottagare Manualer

Yamaha

Yamaha Aventage RX-A4A Bruksanvisning

9 April 2025
Yamaha

Yamaha Aventage RX-A8A Bruksanvisning

9 April 2025
Phonocar

Phonocar PH544 Bruksanvisning

5 April 2025
DJI

DJI D-RTK 3 Bruksanvisning

4 April 2025
Alpine

Alpine MRX-F65 Bruksanvisning

2 April 2025
QSC

QSC SPA-Qf 60x2 Bruksanvisning

2 April 2025
Harper

Harper HDT2-5010 Bruksanvisning

2 April 2025
Harper

Harper HDT2-2010 Bruksanvisning

2 April 2025
Pro-Ject

Pro-Ject Stereo Box DS Bruksanvisning

30 Mars 2025
Streacom

Streacom TL1 Bruksanvisning

30 Mars 2025