Pyle PLUTV40BK Bruksanvisning

Pyle högtalare PLUTV40BK

Läs nedan 📖 manual på svenska för Pyle PLUTV40BK (4 sidor) i kategorin högtalare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

PLUTV40BK

4” Waterproof Rated Off-Road Speakers

900W Compact Power Sport Vehicle

Speaker System for ATV, UTV, 4x4, Jeep (Pair)

Questions? Issues?

We are here to help!

Phone: (1) 718-535-1800

Email: support@pyleusa.com

www.PyleUSA.com

www.PyleUSA.com 3

PLUTV40BK Installation

Please note:

The below instructions refers to most common bar sizes: 1.5”, 1.75” and 2”.

But using the supplied rubber pads will allow you to mount these speakers

on any bar size measured between 1.5” and 2”.

Features:

•

Pro Audio Power Sport Speakers

•

Compact & High-Powered Output

•

Marine Grade Waterproof Rated Construction

•

Weatherproof & Water-Resistant Housing

•

Sound System: (2) x 4'' Woofers + (2) x 1” Tweeters

•

2-Way Full Range Stereo Sound Reproduction

•

Impressive Bass Response

•

Sleek Design, Machine Molded Speaker Cabinet Housing

•

Rugged, Universal Mount Bracket Design for Roll-Bar / Roll-Cage

•

Used for O-Road Outdoor Vehicles: ATV, UTV, 4x4, Jeeps, Marine Watercraft

•

Quick Nickel Plated Push-in Terminal for Speaker Wiring

What's in the Box:

•

(2) O-Road Speakers

•

(6) Rubber Pads 4.53'' x 1.18'' x 0.12'' -inches

Technical Specs:

•

Power Output: 900 Watt MAX

•

Marine Grade Waterproof Rating: IP-X5

•

Speaker Size: 4” -inch (Each)

•

Speaker Style: Passive Speakers

•

Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2)

•

Tweeter Type: Neodymium Dome (x2)

•

Frequency Response: 105Hz-20kHz

•

Impedance: 4 Ohm

•

Magnet Type: 30 oz. Circuit

•

Mid-Woofer Voice Coil Type: 1.0'', KSV

•

Sensitivity: 90 dB +/- 2 dB @ 1M/1W

•

Universal Mounting Brackets Roll-Bar / Roll-Cage

•

Diameter: 1.5” ~ 2.0” -inches

•

Speaker Dimensions: 5.7” x 8.0” x 7.4” -inches, with Bracket (Each)

Remove the two screws from the

bracket to separate the speaker

pod and the bracket.

Remove the backing o the pad

and wrap it around the bar.

The rubber pads will need to be cut to

length, so they t the speaker pod and

the bracket. After the rubber pads have

been cut, remove the white protective

layer and stick them to the speaker pod

and the bracket.

Screw the two screws evenly, until snug.

Once the position is veried, tighten the

screws another half-turn.

DO NOT OVERTIGHTEN!

Step 1 Remove Both

Screws

Step 2

Screws

Mounting Bracket

Mounting Bar

Step 4

4.5” par

2” Bar

1.75” Bar

1.5” Bar

* The pad should go all the way

around the bar. If the pad is too

long, cut the extra length.

2” Bar doesn’t require

padding.

Step 3

Produktspecifikationer

Varumärke:	Pyle
Kategori:	högtalare
Modell:	PLUTV40BK
Vikt:	3300 g
Snäll:	Koepel/Iglotent
Inre material:	Polyester
Rammaterial:	Glasvezel
Markmatta:	Ja
Antal bäddar:	3 persoon/personen
Markplåtsmaterial:	Polyethyleen
Exteriört efterbehandlingsmaterial:	Polyester