Pyle PSIB27 Bruksanvisning

Läs nedan 📖 manual på svenska för Pyle PSIB27 (6 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/6
PSIB27
USERS MANUAL
PORTABLE
SOUND BOOTH
2
Note: Microphone and tripod are not included in the list of contents.
The portable sound booth is used to provide sound protection and to reduce sound reection. The booth
can be open and assembled in a short time. It could be placed on the table. It is suitable for various kind
of microphone including vocal microphone, instrument microphone and other recording microphone, etc.
Note: Please read this user’s manual carefully before using the sound booth. Any mishandling of the product
due to misunderstand of negligence of this manual may lead to malfunction.
Contents of Package
1. Booth Frame×1
2. Foam×4
Installation Guidance
1. Take all the contents from the package and make them properly placed
2. Pull the handle of the booth frame and make it properly structured, the side with the handle should be
in the top when you set up your booth.
Handle
This side should be the top side
3. Zip the back side of the frame.
This zip gap can be also used for the mic cable, add the mic cable rstly if you want to let you mic cable go
from the back,the XLR female end should go inside normally around 2ft.
3
4.Put down the exible board and make it support the back side of the frame.
In order to make sure each foam to stay on the inner side well please follow the below steps
5. Take out one of foam and insert it, aligning it with the top surface.
6. take out a second foam and insert it, aligning it with the right side surface.

Produktspecifikationer

Varumärke: Pyle
Kategori: Inte kategoriserad
Modell: PSIB27

Behöver du hjälp?

Om du behöver hjälp med Pyle PSIB27 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Pyle Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer